All Products
Accelerometer
ADC
Amplifier
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Connector
Converter
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SMPS Controller
Solid State Relay
Special IC
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

WizFi310-CON / The WizFi310-CON is a compact Serial-to-Wi-Fi module, supporting IEEE 802.11 b/g/n wireless connectivity in the 2.4 GHz frequency band with data rates up to 65 Mbps. This version features a built-in PCB antenna (CON version) for easy integration into compact designs. The module operates on 3.3V DC and provides a UART interface with baud rates from 300 bps to 921.6 kbps, making it ideal for embedded applications. It supports multiple network modes, including Station (STA), SoftAP, and simultaneous AP + STA mode, for flexible wireless configurations. Security is ensured through WEP, WPA, and WPA2-PSK encryption, while TCP, UDP, HTTP, DHCP, DNS, ICMP, MQTT, and TLS/SSL protocols enable reliable communication. The WizFi310-CON is configurable via AT commands or a web-based interface, with firmware updates available via UART or Over-the-Air (OTA). Additional features like GPIO, SPI, I2C support, ADC functionality, and low power mode make it suitable for IoT applications, smart devices, and industrial automation. With an operating temperature range of -40°C to +85°C, the WizFi310-CON provides a stable and energy-efficient solution for wireless connectivity.
WizFi310-CON

Description: The WizFi310-CON is a compact Serial-to-Wi-Fi module, supporting IEEE 802.11 b/g/n wireles ...
Package: TRAY | MOQ: 100 | MPQ: 1

WizFi310-PA / The WizFi310-PA is a high-performance Serial-to-Wi-Fi module, offering IEEE 802.11 b/g/n wireless connectivity in the 2.4 GHz frequency band. It provides data rates up to 65 Mbps and features an external antenna (PA version) for enhanced range and signal strength, reaching up to 200 meters in open environments. The module is powered by 3.3V DC and supports a UART interface with baud rates up to 921.6 kbps, making it ideal for embedded applications. It supports multiple network modes, including Station (STA), SoftAP, and simultaneous AP + STA mode, enabling versatile networking configurations. Security is ensured through WEP, WPA, and WPA2-PSK encryption, while TCP, UDP, HTTP, DHCP, DNS, ICMP, MQTT, and TLS/SSL protocols provide robust networking capabilities. Configuration can be done via AT commands or a web-based interface, with firmware upgrades available via UART or Over-the-Air (OTA). Additional features such as GPIO, SPI, I2C support, ADC functionality, and low power mode make it suitable for IoT applications, smart devices, and industrial automation. With an operating temperature range of -40°C to +85°C, the WizFi310-PA is a reliable solution for secure and efficient wireless communication.
WizFi310-PA

Description: The WizFi310-PA is a high-performance Serial-to-Wi-Fi module, offering IEEE 802.11 b/g/n w ...
Package: TRAY | MOQ: 48 | MPQ: 48

WizFi250-H / The WizFi250-H is a compact and highly integrated Wi-Fi module designed for Serial-to-Wi-Fi applications. It supports IEEE 802.11 b/g/n wireless standards in the 2.4 GHz frequency band, offering data rates up to 65 Mbps. The module features a built-in chip antenna, making it ideal for applications where external antennas are not preferred. With a UART interface supporting baud rates from 300 bps to 921.6 kbps, it is easy to integrate into embedded systems. The WizFi250-H supports multiple network modes, including Station (STA), SoftAP, and simultaneous AP + STA mode, allowing flexible network configurations. Advanced security options such as WEP, WPA, WPA2-PSK, and Enterprise WPA/WPA2 ensure safe and reliable wireless communication. Configuration can be done through AT commands or a web-based interface, and firmware can be updated via UART or Over-the-Air (OTA). It also supports essential networking protocols like TCP, UDP, HTTP, DHCP, DNS, ICMP, and SSL/TLS, making it suitable for IoT, industrial automation, and smart device applications. Operating at 3.3V DC with low power consumption, and featuring GPIO, SPI, and I2C support, the WizFi250-H is a reliable and cost-effective solution for wireless connectivity in embedded systems.
WizFi250-H

Description: The WizFi250-H is a compact and highly integrated Wi-Fi module designed for Serial-to-Wi-F ...
Package: TRAY | MOQ: 50 | MPQ: 50

WizFi250-PA / The WizFi250-PA is a high-performance Wi-Fi module designed for Serial-to-Wi-Fi communication, supporting IEEE 802.11 b/g/n standards. It operates in the 2.4 GHz band and provides data transfer speeds of up to 65 Mbps. The module features a UART interface with a configurable baud rate ranging from 300 bps to 921.6 kbps, making it easy to integrate into various embedded applications. The PA (Power Amplified) version comes with an external antenna for improved signal range and stability. It supports multiple network modes, including Station (STA), SoftAP, and simultaneous AP + STA mode. Advanced security features such as WEP, WPA, WPA2-PSK, and Enterprise WPA/WPA2 ensure secure data transmission. Configuration can be done via AT commands over UART or a web-based interface, and firmware updates are possible through UART or OTA (Over-the-Air). The module also supports TCP, UDP, HTTP, DHCP, DNS, ICMP, and SSL/TLS protocols, making it suitable for IoT, industrial automation, and smart device applications. With an operating temperature range of -40°C to +85°C, low power consumption, and additional features like GPIO, SPI, and I2C support, the WizFi250-PA is a reliable solution for wireless connectivity in various embedded systems.
WizFi250-PA

Description: The WizFi250-PA is a high-performance Wi-Fi module designed for Serial-to-Wi-Fi communicat ...
Package: TRAY | MOQ: 72 | MPQ: 36

WIZ145SR / The WIZ145SR is a multi-port Serial-to-Ethernet module designed to support up to four independent RS232 serial ports over an Ethernet network. It allows seamless communication between serial devices and network systems using TCP, UDP, DHCP, DNS, ARP, ICMP, and HTTP protocols. The module features four DB9 RS232 ports, each capable of data transfer rates up to 115.2 kbps, making it suitable for applications requiring multiple serial connections. Powered by 5V DC, it operates efficiently with a power consumption of around 300 mA. Configuration is easy via a web interface, serial port, or Telnet, with firmware upgradeable through Ethernet. The WIZ145SR also includes RTS/CTS hardware flow control to ensure stable communication. It is designed for harsh industrial environments, featuring an extended operating temperature range of -40°C to +85°C. With LED indicators for power, Ethernet, and individual TX/RX status, the WIZ145SR is an excellent choice for integrating multiple RS232 devices into an Ethernet-based network.
WIZ145SR

Description: The WIZ145SR is a multi-port Serial-to-Ethernet module designed to support up to four inde ...
Package: TRAY | MOQ: 80 | MPQ: 40

WIZ140SR / The WIZ140SR is a high-performance multi-port Serial-to-Ethernet module, designed for converting up to four independent TTL (3.3V UART) serial ports into Ethernet communication. It supports TCP, UDP, DHCP, DNS, ARP, ICMP, and HTTP protocols, making it ideal for applications requiring multiple serial connections over a network. The module enables data transfer rates of up to 115.2 kbps per port and operates on a 3.3V DC power supply with low power consumption. It features real-time LED indicators for power, Ethernet status, and individual TX/RX activity, aiding in diagnostics and monitoring. Configuration is easy through a web interface, serial commands, or Telnet, and firmware updates can be performed via Ethernet for long-term adaptability. The module offers RTS/CTS flow control for reliable communication and supports static IP and DHCP networking. With an operating temperature range of -40°C to +85°C, the WIZ140SR is well-suited for industrial and embedded system applications where multiple serial devices need to be connected to a network efficiently.
WIZ140SR

Description: The WIZ140SR is a high-performance multi-port Serial-to-Ethernet module, designed for conv ...
Package: TRAY | MOQ: 80 | MPQ: 80

WIZ125SR / The WIZ125SR is a highly reliable Serial-to-Ethernet module designed to convert RS232/RS485 serial data to Ethernet communication. Supporting protocols like TCP, UDP, DHCP, DNS, ARP, and ICMP, the WIZ125SR provides robust networking capabilities for various industrial and commercial applications. It can transfer data at speeds up to 230.4 kbps and supports 10/100 Mbps Ethernet with auto-negotiation for seamless connectivity. Powered by a 5V DC supply with minimal power consumption (approximately 70 mA), it can be conveniently mounted on a DIN rail or placed in any standard environment. The module is equipped with multiple LED indicators for real-time status updates and diagnostics. It can be configured via a web interface, serial port, or Telnet, and firmware upgrades can be performed through Ethernet or serial communication. With strong isolation (2kV for RS232, 1.5kV for RS485), the WIZ125SR is built to perform reliably in harsh environments, featuring a wide operating temperature range of -20°C to +70°C. This makes it an excellent solution for securely connecting serial devices to Ethernet in diverse settings.
WIZ125SR

Description: The WIZ125SR is a highly reliable Serial-to-Ethernet module designed to convert RS232/RS48 ...
Package: TRAY | MOQ: 80 | MPQ: 80

WIZ120SR / The WIZ120SR is a highly efficient Serial-to-Ethernet module that allows for seamless conversion between RS232/RS485 serial devices and Ethernet networks. It supports a variety of protocols including TCP, UDP, DHCP, DNS, ARP, and ICMP, making it suitable for a wide range of applications requiring reliable networking. Capable of data transfer rates up to 230.4 kbps and supporting auto-negotiation for 10/100 Mbps Ethernet, the WIZ120SR ensures fast and stable communication. It operates on a 5V DC power supply with low power consumption (around 70 mA) and can be mounted on a DIN rail or a flat surface for flexible deployment. The module comes with several LED indicators to provide real-time status updates, helping with diagnostics and troubleshooting. It offers configuration options via web interface, serial port, or Telnet, and supports firmware upgrades via Ethernet or serial port. The WIZ120SR is built to withstand industrial conditions with strong isolation (2kV for RS232 and 1.5kV for RS485) and a wide temperature range of -20°C to +70°C. This makes it a durable and reliable solution for connecting serial devices to Ethernet in demanding environments.
WIZ120SR

Description: The WIZ120SR is a highly efficient Serial-to-Ethernet module that allows for seamless conv ...
Package: TRAY | MOQ: 10 | MPQ: 100

WIZ110SR / The WIZ110SR is a robust Serial-to-Ethernet module designed for converting RS232/RS485 serial communication to Ethernet-based networks. It supports several network protocols such as TCP, UDP, DHCP, DNS, ARP, and ICMP, allowing for reliable and flexible networking. With a data transfer rate of up to 230.4 kbps and auto-negotiation for 10/100 Mbps Ethernet, the WIZ110SR provides efficient communication. It operates on a 5V DC power supply, consuming only around 70 mA, and can be easily mounted on a DIN rail or placed on a flat surface. The module features multiple LED indicators for real-time status updates and troubleshooting. Configuration is simple through a web browser interface, serial port, or Telnet, and firmware can be upgraded via Ethernet or serial port. Designed for industrial use, it offers strong isolation (2kV for RS232, 1.5kV for RS485) and a wide operating temperature range from -20°C to +70°C. The WIZ110SR is ideal for applications requiring secure, high-performance serial-to-Ethernet conversion in demanding environments.
WIZ110SR

Description: The WIZ110SR is a robust Serial-to-Ethernet module designed for converting RS232/RS485 ser ...
Package: TRAY | MOQ: 60 | MPQ: 15

WIZ105SR / The WIZ105SR is a highly reliable Serial-to-Ethernet module that bridges the gap between RS232/RS485 serial devices and Ethernet networks. It supports common network protocols, including TCP, UDP, DHCP, DNS, ARP, and ICMP, ensuring versatile connectivity. With data transfer speeds of up to 230.4 kbps and auto-negotiation for 10/100 Mbps Ethernet, it offers robust performance for networking applications. The module operates with a 5V DC power supply and draws minimal power consumption (typically 70 mA). Compact and designed for flexibility, it can be mounted on DIN rails or placed on a flat surface. The WIZ105SR is equipped with multiple LED indicators to provide real-time status feedback, and it supports configuration via a web interface, serial port, or Telnet. It offers isolation (2kV for RS232, 1.5kV for RS485) for secure communication, making it suitable for industrial environments. Furthermore, it has a wide operating temperature range of -20°C to +70°C and supports firmware upgrades, ensuring long-term reliability and adaptability in diverse conditions.
WIZ105SR

Description: The WIZ105SR is a highly reliable Serial-to-Ethernet module that bridges the gap between R ...
Package: TRAY | MOQ: 100 | MPQ: 10

WIZ100SR / The WIZ100SR is a versatile Serial-to-Ethernet module designed to provide seamless connectivity between serial devices (RS232/RS485) and Ethernet networks. It supports a variety of network protocols, including TCP, UDP, DHCP, DNS, ARP, and ICMP, making it suitable for a wide range of applications. With a data transfer rate of up to 230.4 kbps, it ensures reliable communication over Ethernet at speeds of 10/100 Mbps (auto-negotiation). The module operates on a 5V DC power supply and consumes minimal power, typically around 70 mA at 5V DC. It features a compact design with dimensions of 53.5 mm x 45 mm x 22 mm and can be easily mounted on a DIN rail or placed in a regular environment. The WIZ100SR is equipped with various LED indicators to provide status updates on power, Ethernet, serial communication, and operational diagnostics. Additionally, it supports firmware upgrades and can be configured through a web interface, serial port, or Telnet. The module also offers strong isolation, with 2kV isolation for RS232 and 1.5kV isolation for RS485, making it suitable for industrial and commercial applications. With a wide operating temperature range of -20°C to +70°C and a storage temperature range of -40°C to +85°C, the WIZ100SR is built for reliable performance in diverse environments.
WIZ100SR

Description: The WIZ100SR is a versatile Serial-to-Ethernet module designed to provide seamless connect ...
Package: TRAY | MOQ: 72 | MPQ: 36

WIZ550SR / The WIZ550SR, which is a Serial-to-Ethernet Module designed by WIZnet. This module is used to convert serial communication (RS232, RS485, TTL) to Ethernet communication, making it ideal for connecting serial-based devices to Ethernet networks for remote monitoring, control, and communication.
WIZ550SR

Description: The WIZ550SR, which is a Serial-to-Ethernet Module designed by WIZnet. This module is used ...
Package: TRAY | MOQ: 60 | MPQ: 10

WIZ550S2E-485 / The WIZ550S2E-485 is a variant of the WIZ550S2E Serial-to-Ethernet module specifically designed for RS485 serial communication. This module enables RS485 devices to connect and communicate over Ethernet (10/100 Mbps) networks. It provides a simple and efficient solution for converting RS485 communication into Ethernet communication, making it ideal for integrating legacy RS485-based devices into modern Ethernet infrastructure for applications in industrial automation, IoT, and remote monitoring.
WIZ550S2E-485

Description: The WIZ550S2E-485 is a variant of the WIZ550S2E Serial-to-Ethernet module specifically des ...
Package: TRAY | MOQ: 20 | MPQ: 10

WIZ550S2E-232 / The WIZ550S2E-232 is a variant of the WIZ550S2E Serial-to-Ethernet module designed specifically for RS232 serial communication. Like the WIZ550S2E, it enables RS232 devices to communicate over Ethernet networks (10/100 Mbps). The module is used to convert RS232 communication to Ethernet, making it ideal for connecting legacy RS232-based devices to modern network infrastructures for applications in industrial automation, IoT, and remote monitoring.
WIZ550S2E-232

Description: The WIZ550S2E-232 is a variant of the WIZ550S2E Serial-to-Ethernet module designed specifi ...
Package: TRAY | MOQ: 36 | MPQ: 36

WIZ550S2E / The WIZ550S2E is a Serial-to-Ethernet Module developed by WIZnet, designed to provide RS232/RS485 serial communication over Ethernet (10/100 Mbps). It is part of WIZnet’s series of serial-to-Ethernet modules, which are commonly used in industrial automation, IoT, remote monitoring, and other embedded system applications. The WIZ550S2E offers a compact and cost-effective solution to easily integrate serial devices into Ethernet networks for data exchange, control, and monitoring.
WIZ550S2E

Description: The WIZ550S2E is a Serial-to-Ethernet Module developed by WIZnet, designed to provide RS23 ...
Package: TRAY | MOQ: 40 | MPQ: 40

WIZ550WEB-EVB / The WIZ550WEB-EVB is an evaluation board for the WIZ550WEB Serial-to-Ethernet module. It is designed to help developers easily test, evaluate, and prototype with the WIZ550WEB module, which provides the capability to convert RS232 or RS485 serial communication to Ethernet (10/100 Mbps). The WIZ550WEB-EVB allows users to quickly understand the functionality of the module and integrate it into their designs for industrial automation, IoT, and remote monitoring applications.
WIZ550WEB-EVB

Description: The WIZ550WEB-EVB is an evaluation board for the WIZ550WEB Serial-to-Ethernet module. It i ...
Package: BULK | MOQ: 1 | MPQ: 1

WIZ1000 / The WIZ1000 is a Serial-to-Ethernet module developed by WIZnet, designed for RS232/RS485 serial communication to Ethernet conversion. This module enables serial devices to communicate over Ethernet networks (10/100 Mbps). It is often used in applications where devices that use serial communication (such as RS232 or RS485) need to be integrated into a network, making it ideal for industrial automation, IoT, and remote monitoring systems.
WIZ1000

Description: The WIZ1000 is a Serial-to-Ethernet module developed by WIZnet, designed for RS232/RS485 s ...
Package: BULK | MOQ: 10 | MPQ: 1

WIZ550WEB / The WIZ550WEB is a Serial-to-Ethernet Converter module designed by WIZnet. It allows serial devices, especially those using RS232 or RS485 communication, to connect to Ethernet networks (10/100 Mbps). This module provides an easy and cost-effective solution for integrating legacy serial devices into modern IP-based networks, and is commonly used in applications such as industrial automation, remote monitoring, IoT devices, and embedded systems.
WIZ550WEB

Description: The WIZ550WEB is a Serial-to-Ethernet Converter module designed by WIZnet. It allows seria ...
Package: TRAY | MOQ: 62 | MPQ: 31

WIZ108SR / The WIZ108SR is a Serial-to-Ethernet converter module from WIZnet, designed for converting RS232 or RS485 serial communication to Ethernet (10/100 Mbps). This module is useful for applications that need to connect serial devices to Ethernet networks for remote monitoring and control, ideal for industrial automation, IoT, and embedded systems.
WIZ108SR

Description: The WIZ108SR is a Serial-to-Ethernet converter module from WIZnet, designed for converting ...
Package: TRAY | MOQ: 60 | MPQ: 10

WIZ107SR-232 / The WIZ107SR-232 is a Serial-to-Ethernet converter module designed by WIZnet, specifically for converting RS232 serial communication to Ethernet (10/100 Mbps) networks. It allows devices with RS232 communication interfaces to communicate over Ethernet, providing an efficient and easy way to integrate legacy serial devices into modern Ethernet-based networks. This module is ideal for applications in industrial automation, IoT, and embedded systems.
WIZ107SR-232

Description: The WIZ107SR-232 is a Serial-to-Ethernet converter module designed by WIZnet, specifically ...
Package: TRAY | MOQ: 60 | MPQ: 20

WIZ107SR-TTL / The WIZ107SR-TTL is a Serial-to-Ethernet converter module from WIZnet designed to interface TTL-level serial communication (typically used with microcontrollers and embedded systems) to an Ethernet network (10/100 Mbps). It provides a reliable and efficient solution to integrate TTL-based devices into Ethernet-based networks, enabling remote communication and control over IP. This module is ideal for applications in industrial automation, IoT, and embedded systems.
WIZ107SR-TTL

Description: The WIZ107SR-TTL is a Serial-to-Ethernet converter module from WIZnet designed to interfac ...
Package: TRAY | MOQ: 60 | MPQ: 20

WIZ750SR-485 / The WIZ750SR-485 is a Serial-to-Ethernet converter module designed by WIZnet to facilitate the conversion of RS485 serial communication to Ethernet (10/100 Mbps). This module allows devices with RS485 communication interfaces to be integrated into Ethernet networks for easy communication and data exchange. It is ideal for industrial applications, automation systems, and IoT solutions where RS485 devices need to communicate over an Ethernet network.
WIZ750SR-485

Description: The WIZ750SR-485 is a Serial-to-Ethernet converter module designed by WIZnet to facilitate ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ750SR-232 / The WIZ750SR-232 is a Serial-to-Ethernet converter module from WIZnet, designed for converting RS232 serial communication to Ethernet (10/100 Mbps) networks. This module provides an easy and reliable way to integrate RS232-based serial devices into Ethernet-based systems, allowing devices to communicate over IP networks. It supports protocols like TCP/IP, UDP, and DHCP for efficient and flexible communication.
WIZ750SR-232

Description: The WIZ750SR-232 is a Serial-to-Ethernet converter module from WIZnet, designed for conver ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ750SR-TTL / The WIZ750SR-TTL is another module from WIZnets WIZ750SR series, specifically designed to convert TTL-level serial communication to Ethernet (10/100 Mbps). This module provides a simple and effective solution for integrating serial TTL devices with Ethernet networks. It is commonly used in embedded systems, IoT applications, and industrial automation.
WIZ750SR-TTL

Description: The WIZ750SR-TTL is another module from WIZnets WIZ750SR series, specifically designed to ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ752SR-125 / WIZ120SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethernet MCU External PHY(IC+) 2x Serial Interface DSUB9 Connector
WIZ752SR-125

Description: WIZ120SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethe ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ752SR-120 / WIZ120SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethernet MCU External PHY(IC+) Pin Header Terminal UART Interface
WIZ752SR-120

Description: WIZ120SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethe ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ750SR-110 / WIZ110SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethernet MCU External PHY(IC+) + Ethernet Mag-Jack with with X‚FMR + DSUB9 TTL&RS-232C Interface
WIZ750SR-110

Description: WIZ110SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethe ...
Package: TRAY | MOQ: 36 | MPQ: 18

WIZ750SR-105 / WIZ100SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethernet MCU External PHY(IC+) + Ethernet Mag-Jack with with XFMR
WIZ750SR-105

Description: WIZ100SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethe ...
Package: TRAY | MOQ: 40 | MPQ: 40

WIZ750SR-100 / WIZ100SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethernet MCU External PHY(IC+) Pin Header Terminal
WIZ750SR-100

Description: WIZ100SR Compatible Seri Ethernet Dönüştürücü (Serial To Ethernet Module) W7500 Ethe ...
Package: TRAY | MOQ: 36 | MPQ: 36

WIZ812MJ / W5100 Ethernet Network Module MCU BUS High Speed SPI Interface(Seperated from BUS SPI-EN controlled by SCS) Ethernet Hardwired TCP/IP
WIZ812MJ

Description: W5100 Ethernet Network Module MCU BUS High Speed SPI Interface(Seperated from BUS SPI-EN c ...
Package: TRAY | MOQ: 40 | MPQ: 20

WIZ811MJ / The WIZ811MJ is another Ethernet module from WIZnet, similar to the WIZ810MJ. It offers similar functionality but with slight variations in design and connectivity options.
WIZ811MJ

Description: The WIZ811MJ is another Ethernet module from WIZnet, similar to the WIZ810MJ. It offers si ...
Package: TRAY | MOQ: 40 | MPQ: 20

WIZ810MJ / W5100 Ethernet Network Module MCU BUS High Speed SPI Interface Ethernet Hardwired TCP/IP
WIZ810MJ

Description: W5100 Ethernet Network Module MCU BUS High Speed SPI Interface Ethernet Hardwired TCP/IP ...
Package: TRAY | MOQ: 40 | MPQ: 40

WIZ830MJ / W5300 Ethernet Network Module Parallel 8/16 Bus Interface Ethernet Hardwired TCP/IP
WIZ830MJ

Description: W5300 Ethernet Network Module Parallel 8/16 Bus Interface Ethernet Hardwired TCP/IP ...
Package: TRAY | MOQ: 36 | MPQ: 36

WIZ850io / W5500 TCP/IP IC + Ethernet Port with Line Filter Small Size Ethernet Enabling System
WIZ850io

Description: W5500 TCP/IP IC + Ethernet Port with Line Filter Small Size Ethernet Enabling System ...
Package: TRAY | MOQ: 40 | MPQ: 40

WIZ550io / Configurable Ethernet Controller W5500 TCP/IP IC + PIC12F519 MCU Ethernet Port with Line Filter
WIZ550io

Description: Configurable Ethernet Controller W5500 TCP/IP IC + PIC12F519 MCU Ethernet Port with Line F ...
Package: TRAY | MOQ: 40 | MPQ: 40

W5300 / Ethernet Controller 10/100 Base-T/TX PHY Parallel Interface 100-LQFP
W5300

Description: Ethernet Controller 10/100 Base-T/TX PHY Parallel Interface 100-LQFP ...
Package: TRAY | MOQ: 360 | MPQ: 90

W5100S-Q / Ethernet Controller 10/100 Base-T/TX PHY SPI Interface 48-QFN
W5100S-Q

Description: Ethernet Controller 10/100 Base-T/TX PHY SPI Interface 48-QFN ...
Package: T&R | MOQ: 4000 | MPQ: 4000

W5100S-L / Ethernet Controller 10/100 Base-T/TX PHY SPI Interface 48-LQFP
W5100S-L

Description: Ethernet Controller 10/100 Base-T/TX PHY SPI Interface 48-LQFP ...
Package: T&R | MOQ: 2000 | MPQ: 2000

W6100-Q / Hardwired TCP/IP IC Ethernet supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE protocols, SPI Interface 48-QFN
W6100-Q

Description: Hardwired TCP/IP IC Ethernet supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, A ...
Package: T&R | MOQ: 4000 | MPQ: 4000

W6100-L / Hardwired TCP/IP IC Ethernet supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE protocols, SPI Interface LQFP48
W6100-L

Description: Hardwired TCP/IP IC Ethernet supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, A ...
Package: TRAY | MOQ: 200 | MPQ: 200

W7100A-64QFN / 8051 Microcontroller 8-Bit 25MHz 64KB (64K x 8) FLASH, Ethernet Hardwired Fully Stack QFN64
W7100A-64QFN

Description: 8051 Microcontroller 8-Bit 25MHz 64KB (64K x 8) FLASH, Ethernet Hardwired Fully Stack QFN6 ...
Package: TRAY | MOQ: 260 | MPQ: 260

W7100A-100LQFP / 8051 - Microcontroller IC 8-Bit 25MHz 64KB (64K*8) FLASH 100-LQFP (14*14mm), 256*8 EEPROM Size, 64K*8 RAM Size, EBI/EMI, Ethernet, UART/USART
W7100A-100LQFP

Description: 8051 - Microcontroller IC 8-Bit 25MHz 64KB (64K*8) FLASH 100-LQFP (14*14mm), 256*8 EEPROM ...
Package: TRAY | MOQ: 360 | MPQ: 90

W5200 / Hardwired TCP/IP: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. Un-attackable hardware network engine. High Speed SPI Mode 0,3. Power down & wake-on LAN. Internal 32Kbytes memory for TCP/IP. 10BaseT / 100Base TX Ethernet PHY Embedded. Auto-MDIX. 3.3V Operation with 5V I/O signal tolerance. 48QFN LF Figure (7x7mm)
W5200

Description: Hardwired TCP/IP: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. Un-attackable hardware network e ...
Package: T&R | MOQ: 2000 | MPQ: 2000

PIC18F45K40-I/PT / PIC XLP™ 18K Microcontroller IC 8-Bit 64MHz 32KB (16K*16) FLASH 44-TQFP (10*10mm), Brown-out Detect/Reset, LVD, POR, PWM, WDT, I2C, LINbus, SPI, UART/USART, ADC 35x10b; DAC 1x5b
PIC18F45K40-I/PT

Description: PIC XLP™ 18K Microcontroller IC 8-Bit 64MHz 32KB (16K*16) FLASH 44-TQFP (10*10mm), Brown ...
Package: TRAY | MOQ: 320 | MPQ: 160

PIC12F1822-I/SN / PIC XLP 12F Microcontroller IC 8-Bit 32MHz 3.5KB (2K*14) FLASH, Brown-out Detect/Reset, POR, PWM, WDT, I2C, LINbus, SPI, UART/USART, 1.8V ~ 5.5V, ADC 4x10b; DAC 1x5b, PIC12F1822-I/SN, PIC12F1822T-I/SN, PIC12F1822-I/MF, PIC12F1822T-I/MF, PIC12F1822-I/P, PIC12F1822-E/SN, PIC12F1822-E/MF, PIC12F1822-E/P, PIC12F1822T-I/RF, PIC12F1822T-E/MF
PIC12F1822-I/SN

Description: PIC XLP 12F Microcontroller IC 8-Bit 32MHz 3.5KB (2K*14) FLASH, Brown-out Detect/Reset, PO ...
Package: T&R | MOQ: 3300 | MPQ: 3300

PIC18F26K80-I/SS / PIC XLP 18K Microcontroller IC 8-Bit 64MHz 64KB (32K*16) FLASH, Brown-out Detect/Reset, LVD, POR, PWM, WDT, ECANbus, I2C, LINbus, SPI, UART/USART ADC 8*12b
PIC18F26K80-I/SS

Description: PIC XLP 18K Microcontroller IC 8-Bit 64MHz 64KB (32K*16) FLASH, Brown-out Detect/Reset, L ...
Package: TUBE | MOQ: 940 | MPQ: 47

HCS301-I/SN / The HCS301-I/SN is a code hopping encoder IC developed by Microchip Technology, primarily designed for secure remote keyless entry (RKE) systems and access control applications. It utilizes Microchips patented KEELOQ technology, which combines a 32-bit hopping code generated by a non-linear encryption algorithm with a 28-bit serial number and six status bits, resulting in a 66-bit transmission stream. This mechanism ensures that each transmission is unique, effectively mitigating the risks associated with code scanning and code grabbing attempts. Other Part Numbers HCS301/SN, HCS301T/SN, HCS301-I/SN, HCS301T-I/SN, HCS301/P, HCS301-I/P
HCS301-I/SN

Description: The HCS301-I/SN is a code hopping encoder IC developed by Microchip Technology, primarily ...
Package: T&R | MOQ: 3300 | MPQ: 3300

W7500 / W7500P MCU ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core 32KB SRAM, 128KB Flash, 6KB ROM (BOOT), 8CH 12Bit ADC(1Msps), 6CH DMA, UART(2)/SPI(2)/I2C(2), SWD, RNG, 64TQFP
W7500

Description: W7500P MCU ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core 32KB SRAM, 128KB Flash, 6K ...
Package: T&R | MOQ: 250 | MPQ: 250

W7500P / W7500P MCU ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core + PHY 32KB SRAM, 128KB Flash, 6KB ROM (BOOT), 8CH 12Bit ADC(1Msps), 6CH DMA, UART(2)/SPI(2)/I2C(2), SWD, RNG, 64TQFP
W7500P

Description: W7500P MCU ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core + PHY 32KB SRAM, 128KB Fla ...
Package: TRAY | MOQ: 250 | MPQ: 250

W7100A-S2E-100 / The W7100A-S2E-100 is an 8-bit microcontroller developed by WIZnet, integrating Ethernet connectivity for embedded applications. It combines the W7100A microcontroller with the WIZ107SR firmware and MAC, providing a comprehensive solution for networked systems.
W7100A-S2E-100

Description: The W7100A-S2E-100 is an 8-bit microcontroller developed by WIZnet, integrating Ethernet c ...
Package: TRAY | MOQ: 450 | MPQ: 90

W7500-S2E / W7500S2E module series support both data pass-through mode and AT data transfer mode. It supports TCP server, TCP clients and UDP 3 operation mode. Serial baud rate can be as high as 460,800bps. It can be configured by PC configuration utility, web page and AT command. The unparalleled and robust of W7500S2E module based on ARM Cortex 32bit MCU with hardwired TCP/IP. Accompanied by a vast functionalities, makes the family of products the ideal choice, both for new design project or an upgrading of current platform.
W7500-S2E

Description: W7500S2E module series support both data pass-through mode and AT data transfer mode. It s ...
Package: TRAY | MOQ: 250 | MPQ: 250













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |