All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Fuse
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
SSD
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

ESP32-WROOM-32E-N4 / The ESP32-WROOM-32E-N4 is a reliable and widely used <strong>Wi-Fi and Bluetooth microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for a broad range of IoT and embedded applications. It is based on a <strong>dual-core Xtensa LX6 processor</strong>, delivering strong processing performance for multitasking and real-time control. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth (Classic + BLE)</strong>, providing flexible and stable wireless connectivity for connected devices and systems. <br><br>It includes <strong>4MB embedded flash memory</strong>, allowing sufficient storage for firmware and application data without requiring external memory components. <br><br>The ESP32-WROOM-32E-N4 offers a wide range of peripheral interfaces including <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, and GPIO</strong>, enabling easy integration with sensors, displays, and external hardware. <br><br>Advanced features such as <strong>low-power operation modes, secure boot, flash encryption, and hardware cryptographic acceleration</strong> enhance both energy efficiency and system security. <br><br>Packaged in a compact <strong>SMD module with castellated edges</strong>, the ESP32-WROOM-32E-N4 simplifies PCB design and accelerates development while maintaining strong RF performance. <br><br>The <strong>ESP32-WROOM-32E-N4</strong> is widely used in applications such as <strong>IoT devices, smart home systems, industrial automation, wearable electronics, wireless sensors, and consumer electronics</strong>, where reliable connectivity and processing capability are essential.
ESP32-WROOM-32E-N4

Description: The ESP32-WROOM-32E-N4 is a reliable and widely used Wi-Fi and Bluetooth microcont ...
Package: T&R | MOQ: 650 | MPQ: 650

EP3C25E144C8N / Cyclone III Field Programmable Gate Array (FPGA) IC 82 608256 24624 144-LQFP Exposed Pad
EP3C25E144C8N

Description: Cyclone III Field Programmable Gate Array (FPGA) IC 82 608256 24624 144-LQFP Exposed Pad ...
Package: TRAY | MOQ: 60 | MPQ: 60

LTV-814S-TA1 / Optoisolator Transistor Output 5000Vrms 1-Ch. 4-SMD, 1.2V, 50mA, 35V
LTV-814S-TA1

Description: Optoisolator Transistor Output 5000Vrms 1-Ch. 4-SMD, 1.2V, 50mA, 35V ...
Package: T&R | MOQ: 1000 | MPQ: 1000

LTV-356T / Optoisolator Transistor Output 3750Vrms 1 Channel 4-SOP 80V 50mA
LTV-356T

Description: Optoisolator Transistor Output 3750Vrms 1 Channel 4-SOP 80V 50mA ...
Package: T&R | MOQ: 3000 | MPQ: 3000

LTV-817S-TA1 / Optoisolator Transistor Output 5000Vrms 1 Channel 4-SMD, Vf 1.2V, If 50mA, Voltage 35V
LTV-817S-TA1

Description: Optoisolator Transistor Output 5000Vrms 1 Channel 4-SMD, Vf 1.2V, If 50mA, Voltage 35V ...
Package: T&R | MOQ: 1000 | MPQ: 1000

LTV-817 / Optoisolator Transistor Output 5000Vrms 1 Channel 4-DIP, 50% @ 5mA(min) - 600% @ 5mA(max), 4µs, 3µs Rise/Fall Time
LTV-817

Description: Optoisolator Transistor Output 5000Vrms 1 Channel 4-DIP, 50% @ 5mA(min) - 600% @ 5mA(max), ...
Package: TUBE | MOQ: 2000 | MPQ: 100

DSPIC33EP512MU810-E/PT / DSPIC33EP512MU810-E/PT dsPIC dsPIC™ 33EP Microcontroller IC 16-Bit 60 MIPs 512KB (170K*24) FLASH 100-TQFP (12*12mm), CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG, Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
DSPIC33EP512MU810-E/PT

Description: DSPIC33EP512MU810-E/PT dsPIC dsPIC™ 33EP Microcontroller IC 16-Bit 60 MIPs 512KB (170K*2 ...
Package: TRAY | MOQ: 714 | MPQ: 119

DSPIC30F4011-30I/PT / DSPIC30F4011-30I/PT dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 48KB (16K*24) FLASH 44-TQFP (10*10mm), Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT, CANbus, I2C, SPI, UART/USART
DSPIC30F4011-30I/PT

Description: DSPIC30F4011-30I/PT dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 48KB (16K*24) FLA ...
Package: TRAY | MOQ: 480 | MPQ: 480

DSP56F807PY80E / DSP56F807PY80E 56800 56F8xx Microcontroller IC 16-Bit 80MHz 120KB (60K x 16) FLASH 160-LQFP (24x24)
DSP56F807PY80E

Description: DSP56F807PY80E 56800 56F8xx Microcontroller IC 16-Bit 80MHz 120KB (60K x 16) FLASH 160-LQF ...
Package: TRAY | MOQ: 200 | MPQ: 200

DS3231SN# / The DS3231SN# is a highly accurate <strong>real-time clock (RTC) integrated circuit</strong> developed by <strong>Analog Devices</strong>, featuring a built-in <strong>temperature-compensated crystal oscillator (TCXO)</strong> for precise timekeeping. Unlike standard RTCs, it maintains exceptional accuracy across a wide temperature range without requiring external calibration. <br><br>The device communicates via a <strong>I2C serial interface</strong>, making it easy to integrate with microcontrollers, embedded systems, and development platforms such as Arduino and Raspberry Pi. It provides timekeeping data including <strong>seconds, minutes, hours, day, date, month, and year</strong>, with automatic leap-year compensation. <br><br>The DS3231SN# includes an integrated <strong>battery backup input</strong>, allowing it to maintain accurate time even when the main power supply is removed. This makes it ideal for systems requiring reliable time retention during power interruptions. <br><br>It also features <strong>two programmable time-of-day alarms and a square-wave output</strong>, enabling flexible timing and interrupt-based applications. Additionally, an integrated digital temperature sensor provides temperature readings used for oscillator compensation and can also be accessed by the host system. <br><br>Operating over a wide voltage range of approximately <strong>2.3V to 5.5V</strong>, the DS3231SN# is compatible with a variety of low-power and standard logic systems. <br><br>Packaged in a compact <strong>SOIC-16 surface-mount form factor</strong>, the DS3231SN# is suitable for space-constrained designs while maintaining robust performance. <br><br>The <strong>DS3231SN#</strong> is widely used in applications such as <strong>data loggers, industrial automation systems, IoT devices, embedded controllers, smart meters, and consumer electronics</strong>, where accurate and reliable real-time tracking is essential.
DS3231SN#

Description: The DS3231SN# is a highly accurate real-time clock (RTC) integrated circuit ...
Package: T&R | MOQ: 1000 | MPQ: 1000

DS18S20+ / DS18S20+ Temperature Sensor Digital -55°C ~ 125°C, Unique 1-Wire® Interface Requires Only One Port Pin for Communication
DS18S20+

Description: DS18S20+ Temperature Sensor Digital -55°C ~ 125°C, Unique 1-Wire® Interface Requires O ...
Package: BULK | MOQ: 2000 | MPQ: 2000

IRFS23N20D / IRFS23N20D MOSfet VDS=200V, ID=52A, RDS(ON)<60mΩ@VGS=10V This N-Channel MOSFET uses advanced Planar technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications.
IRFS23N20D

Description: IRFS23N20D MOSfet VDS=200V, ID=52A, RDS(ON) ...
Package: | MOQ: | MPQ:

IRF7406 / The IRF7406 is a compact and efficient <strong>N-channel power MOSFET</strong> developed by <strong>Infineon Technologies</strong>, optimized for low-voltage switching and power management applications. It features a low <strong>RDS(on)</strong> which minimizes conduction losses and enhances overall system efficiency. <br><br>This device is designed for <strong>logic-level gate drive operation</strong>, enabling direct control from low-voltage digital circuits such as microcontrollers and embedded systems without the need for additional gate driving circuitry. <br><br>The IRF7406 supports a maximum drain-to-source voltage of <strong>30V</strong> and is capable of handling moderate to high current loads, making it suitable for DC-DC converters, load switching, and power regulation tasks. <br><br>With <strong>fast switching performance and low gate charge</strong>, it is well-suited for high-frequency applications, improving efficiency in switching regulators and PWM-based designs. <br><br>Housed in a space-saving <strong>SO-8 surface-mount package</strong>, the IRF7406 is ideal for compact PCB layouts and high-density electronic designs. <br><br>The <strong>IRF7406</strong> is commonly used in applications such as <strong>portable electronics, power supplies, battery-powered devices, load switches, and embedded control systems</strong>, where efficient and reliable switching performance is essential.
IRF7406

Description: The IRF7406 is a compact and efficient N-channel power MOSFET developed b ...
Package: T&R | MOQ: 3000 | MPQ: 3000

IRLB8721 / The IRLB8721 is a high-efficiency <strong>N-channel power MOSFET</strong> developed by <strong>Infineon Technologies</strong>, designed for low-voltage and high-current switching applications. It features an ultra-low <strong>RDS(on)</strong>, enabling minimal conduction losses and improved overall system efficiency. <br><br>This device is optimized for <strong>logic-level gate drive operation</strong>, allowing it to be fully enhanced with low gate voltages typically provided by microcontrollers such as Arduino and other digital control systems. This makes it ideal for direct interfacing without the need for additional gate drivers. <br><br>The IRLB8721 supports a maximum drain-to-source voltage of <strong>30V</strong> and is capable of handling high continuous drain currents, making it suitable for power management, motor control, and load switching applications. <br><br>With its <strong>fast switching characteristics</strong> and low gate charge, the device ensures efficient performance in high-frequency switching circuits such as DC-DC converters and PWM-based systems. <br><br>Packaged in a robust <strong>TO-220AB through-hole form factor</strong>, the IRLB8721 provides excellent thermal performance and ease of mounting, making it suitable for both prototyping and industrial applications. <br><br>The <strong>IRLB8721</strong> is widely used in applications such as <strong>motor drivers, LED dimmers, power supplies, battery management systems, and embedded control designs</strong>, where reliable and efficient power switching is required.
IRLB8721

Description: The IRLB8721 is a high-efficiency N-channel power MOSFET developed by ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IRFHM4234 / The IRFHM4234 is a high-efficiency <strong>N-channel power MOSFET</strong> developed by <strong>Infineon Technologies</strong>, designed for low-voltage, high-current switching applications such as DC-DC converters and power management systems. It features a <strong>maximum drain-source voltage of 25V</strong> and supports high current capability (up to ~40A continuous depending on thermal conditions), making it ideal for modern high-density power designs. One of its key advantages is the extremely <strong>low RDS(on) (as low as ~4.4 mΩ)</strong>, which significantly reduces conduction losses and improves overall efficiency in power conversion circuits. The device is built using advanced <strong>trench MOSFET technology (FastIRFET™)</strong>, offering: <strong>Low gate charge (~8.2 nC)</strong> → faster switching <strong>Low thermal resistance (~4.4 °C/W)</strong> → improved heat dissipation <strong>High power density</strong> in compact layouts It operates with a <strong>gate-source voltage up to ±20V</strong> and supports efficient switching even at logic-level drive voltages (e.g., 4.5V), making it suitable for modern low-voltage controllers. The compact <strong>PQFN 3.3 × 3.3 mm package</strong> enables space-saving PCB designs while maintaining strong thermal performance, ideal for high-frequency switching applications.
IRFHM4234

Description: The IRFHM4234 is a high-efficiency N-channel power MOSFET developed by ...
Package: T&R | MOQ: 4000 | MPQ: 4000

IRFZ24N / The IRFZ24N is a robust and widely used <strong>N-channel power MOSFET</strong> developed by <strong>Infineon Technologies (formerly International Rectifier)</strong>, designed for efficient power switching and amplification in a wide range of electronic applications. It is part of the well-known <strong>HEXFET power MOSFET family</strong>, optimized for low conduction losses and fast switching performance. <br><br>The device supports a maximum <strong>drain-source voltage of 55V</strong> and a continuous drain current of up to <strong>17A</strong>, making it suitable for medium-power switching applications such as motor control, DC-DC converters, and power supplies. <br><br>It features a low <strong>RDS(on) of approximately 0.07Ω</strong>, which helps reduce conduction losses and improve overall efficiency in power circuits. <br><br>The IRFZ24N offers <strong>fast switching characteristics and high avalanche ruggedness</strong>, ensuring reliable operation under dynamic load conditions and inductive switching environments. <br><br>With a <strong>gate-source voltage rating of ±20V</strong> and a typical threshold voltage around <strong>2V–4V</strong>, it can be driven by standard gate driver circuits and is suitable for many logic-level control applications. <br><br>Housed in a durable <strong>TO-220 through-hole package</strong>, the device allows efficient heat dissipation and easy mounting with heatsinks, making it ideal for both prototyping and industrial designs. <br><br>The <strong>IRFZ24N</strong> is widely used in applications such as <strong>motor drivers, switching power supplies, DC-DC converters, LED drivers, battery management systems, and general-purpose power control circuits</strong>, where high efficiency and reliability are essential.
IRFZ24N

Description: The IRFZ24N is a robust and widely used N-channel power MOSFET developed ...
Package: TUBE | MOQ: 1000 | MPQ: 50

DS18B20-EV / The DS18B20-EV is a reliable <strong>digital temperature sensor</strong> developed by <strong>EVVO</strong>, designed for accurate temperature measurement in embedded and industrial applications. It utilizes a <strong>1-Wire communication interface</strong>, allowing multiple sensors to operate on a single data line, simplifying system wiring and reducing complexity. <br><br>The device provides <strong>programmable resolution from 9-bit to 12-bit</strong>, enabling precise temperature readings with high accuracy. It supports a wide measurement range of approximately <strong>-55°C to +125°C</strong>, making it suitable for various environmental and industrial monitoring applications. <br><br>The DS18B20-EV operates with a supply voltage of <strong>2.5V to 5.5V</strong> and supports <strong>parasite power mode</strong>, allowing it to be powered directly from the data line without requiring an external power supply, which is ideal for remote sensing setups. <br><br>Each sensor includes a <strong>unique 64-bit serial code</strong>, enabling multiple devices to be connected on the same bus without address conflicts, making it ideal for distributed temperature sensing systems. <br><br>The device integrates <strong>temperature conversion, alarm functionality, and non-volatile memory</strong>, reducing the need for external components and improving overall system efficiency. <br><br>Packaged in a standard <strong>TO-92 through-hole form factor</strong>, the DS18B20-EV is easy to use in both prototyping and production environments. It is compatible with standard PCB assembly processes and widely used in development platforms. <br><br>The <strong>DS18B20-EV</strong> is widely used in applications such as <strong>HVAC systems, industrial temperature monitoring, IoT devices, environmental sensing, home automation, and embedded control systems</strong>, where accurate, low-cost, and easy-to-integrate temperature sensing is required.
DS18B20-EV

Description: The DS18B20-EV is a reliable digital temperature sensor developed by ...
Package: BULK | MOQ: 2000 | MPQ: 2000

DS18B20 / The DS18B20 is a highly popular <strong>digital temperature sensor</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for accurate and reliable temperature measurement in a wide range of applications. It utilizes a <strong>1-Wire communication interface</strong>, allowing multiple devices to be connected using a single data line, significantly simplifying system wiring. <br><br>The device provides <strong>programmable resolution from 9-bit to 12-bit</strong>, delivering precise temperature readings with accuracy up to <strong>±0.5°C</strong> over a typical operating range. It supports a wide measurement range of approximately <strong>-55°C to +125°C</strong>, making it suitable for both industrial and consumer applications. <br><br>The DS18B20 operates with a supply voltage of <strong>3.0V to 5.5V</strong> and supports <strong>parasite power mode</strong>, allowing it to draw power directly from the data line when needed, which is ideal for remote sensing installations. <br><br>Each sensor contains a unique <strong>64-bit serial code</strong>, enabling multiple sensors to coexist on the same bus without address conflicts, making it ideal for distributed temperature monitoring systems. <br><br>The device integrates <strong>temperature-to-digital conversion, alarm threshold registers, and non-volatile memory</strong>, reducing the need for additional external components and simplifying system design. <br><br>Packaged in a standard <strong>TO-92 through-hole form factor</strong>, the DS18B20 is easy to integrate into both prototype and production environments. It is also widely available in sealed probe versions for use in harsh or outdoor conditions. <br><br>The <strong>DS18B20</strong> is widely used in applications such as <strong>HVAC systems, industrial monitoring, home automation, IoT devices, environmental sensing, and embedded control systems</strong>, where accurate, low-cost, and easy-to-use digital temperature sensing is required.
DS18B20

Description: The DS18B20 is a highly popular digital temperature sensor developed by ...
Package: BULK | MOQ: 2000 | MPQ: 2000

DS18B20+ / The DS18B20+ is a widely used <strong>digital temperature sensor</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for precise temperature measurement in embedded and industrial applications. It communicates via a unique <strong>1-Wire interface</strong>, allowing multiple sensors to operate on a single data line, significantly simplifying wiring and system design. <br><br>The device provides <strong>programmable resolution from 9-bit to 12-bit</strong>, delivering temperature measurements with accuracy up to <strong>±0.5°C</strong> over a typical range. It supports a wide measurement range of approximately <strong>-55°C to +125°C</strong>, making it suitable for both low and high temperature environments. <br><br>The DS18B20+ operates with a supply voltage of <strong>3.0V to 5.5V</strong> and supports <strong>parasite power mode</strong>, allowing it to be powered directly from the data line without requiring a separate power supply, which is ideal for remote sensing applications. <br><br>Each device includes a <strong>unique 64-bit serial code</strong>, enabling multiple sensors to be connected on the same bus without conflict. This makes it highly suitable for distributed temperature sensing systems. <br><br>The sensor integrates <strong>temperature-to-digital conversion, alarm functions, and non-volatile EEPROM</strong> for storing user-defined thresholds, reducing the need for external components. <br><br>Packaged in a standard <strong>TO-92 through-hole form factor</strong>, the DS18B20+ is easy to integrate into prototypes and production designs. It is also commonly available in <strong>waterproof probe versions</strong> for harsh environments and outdoor applications. <br><br>The <strong>DS18B20+</strong> is widely used in applications such as <strong>HVAC systems, industrial temperature monitoring, home automation, IoT devices, environmental sensing, and embedded control systems</strong>, where accurate, low-cost, and easy-to-use digital temperature measurement is required.
DS18B20+

Description: The DS18B20+ is a widely used digital temperature sensor developed by ...
Package: BULK | MOQ: 2000 | MPQ: 2000

DS1340C-33# / The DS1340C-33# is a compact and highly integrated <strong>real-time clock (RTC) and calendar IC</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for accurate timekeeping in embedded systems and low-power applications. It maintains full calendar functionality including <strong>seconds, minutes, hours, day, date, month, and year with automatic leap-year compensation</strong>. <br><br>The device features an <strong>integrated 32.768 kHz crystal oscillator</strong>, eliminating the need for external crystal components and simplifying PCB design while improving reliability and accuracy. <br><br>It communicates through a standard <strong>I2C serial interface (up to 400 kHz)</strong>, allowing easy integration with microcontrollers, DSPs, and embedded systems. <br><br>The DS1340C-33# operates with a <strong>3.3V supply</strong> and includes <strong>automatic power-fail detection and backup switching</strong>, seamlessly transitioning to a backup supply to maintain continuous timekeeping during power interruptions. <br><br>It also includes a <strong>trickle charger circuit</strong> for rechargeable backup sources such as supercapacitors, along with an <strong>oscillator stop flag and software calibration</strong> features to enhance accuracy and system reliability. <br><br>With extremely low power consumption and a <strong>timekeeping voltage down to approximately 1.3V</strong>, the device is optimized for long battery life in portable and standby systems. <br><br>Packaged in a compact <strong>SOIC-16 surface-mount form factor</strong>, the DS1340C-33# is suitable for high-density PCB layouts and automated manufacturing processes. <br><br>The <strong>DS1340C-33#</strong> is widely used in applications such as <strong>portable instruments, industrial control systems, medical devices, telecommunications equipment, and embedded systems</strong>, where accurate, low-power timekeeping with backup capability is essential.
DS1340C-33#

Description: The DS1340C-33# is a compact and highly integrated real-time clock (RTC) and calen ...
Package: TUBE | MOQ: 506 | MPQ: 46

DS1344D-33+T&R / The DS1344D-33+T&R is a low-power <strong>real-time clock (RTC) and calendar IC</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for accurate timekeeping in embedded and industrial applications. It maintains complete calendar information including <strong>seconds, minutes, hours, day, date, month, and year with automatic leap-year compensation</strong>. <br><br>The device integrates <strong>96 bytes of battery-backed non-volatile SRAM</strong>, allowing user data storage even during power loss, making it suitable for backup and low-power systems. <br><br>The DS1344D-33+T&R supports both <strong>SPI and 3-wire serial interfaces</strong>, enabling flexible communication with microcontrollers, DSPs, and FPGA systems. <br><br>It operates within a supply voltage range of <strong>3.0V to 5.5V</strong> and includes a <strong>power-fail detection and automatic backup switching circuit</strong>, ensuring continuous timekeeping using a backup battery when the main supply is interrupted. <br><br>The device features extremely low power consumption, with a typical <strong>timekeeping current around 250nA</strong>, making it ideal for long-term battery-powered applications. <br><br>Additional features include <strong>two programmable alarms, square-wave output, trickle charger support, and burst read/write mode</strong>, enhancing flexibility in system design. <br><br>Packaged in a compact <strong>14-pin TDFN surface-mount package</strong>, the DS1344D-33+T&R is optimized for high-density PCB layouts and automated manufacturing processes. <br><br>The <strong>DS1344D-33+T&R</strong> is widely used in applications such as <strong>industrial control systems, data logging, medical devices, telematics, and embedded timestamping systems</strong>, where accurate, low-power timekeeping with backup capability is essential.
DS1344D-33+T&R

Description: The DS1344D-33+T&R is a low-power real-time clock (RTC) and calendar IC d ...
Package: T&R | MOQ: 2500 | MPQ: 2500

DS1307ZN+T&R / The DS1307ZN+T&R is a reliable <strong>real-time clock (RTC) and calendar IC</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for accurate timekeeping in embedded and industrial applications. It provides full calendar functionality including <strong>seconds, minutes, hours, day, date, month, and year with automatic leap-year compensation</strong>. <br><br>The device integrates <strong>56 bytes of battery-backed non-volatile SRAM</strong>, allowing user data storage even during power loss, making it suitable for backup and low-power systems. <br><br>The DS1307ZN+T&R communicates via a standard <strong>2-wire I2C interface</strong>, enabling easy integration with microcontrollers and minimizing system complexity. <br><br>It includes an <strong>automatic power-fail detection and switching circuit</strong>, seamlessly transitioning to a backup battery supply to maintain continuous timekeeping when the main power is interrupted. <br><br>The device operates with a main supply voltage of <strong>4.5V to 5.5V</strong> and a backup supply range of <strong>2V to 3.5V</strong>, supporting flexible system designs. It also features a <strong>programmable square-wave output</strong> and supports both <strong>12-hour and 24-hour formats</strong>. <br><br>With very low standby current (typically <strong>less than 500nA in battery mode</strong>), the DS1307ZN+T&R ensures long battery life in timekeeping applications. <br><br>Packaged in a compact <strong>SOIC-8 surface-mount form factor with tape-and-reel packaging</strong>, it is optimized for automated high-volume manufacturing processes. <br><br>The <strong>DS1307ZN+T&R</strong> is widely used in applications such as <strong>industrial controllers, data logging systems, IoT devices, consumer electronics, and embedded systems</strong>, where accurate timekeeping with battery backup is required.
DS1307ZN+T&R

Description: The DS1307ZN+T&R is a reliable real-time clock (RTC) and calendar IC deve ...
Package: T&R | MOQ: 2500 | MPQ: 2500

DS1307N+ / The DS1307N+ is a reliable <strong>real-time clock (RTC) and calendar IC</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed to provide accurate timekeeping and date management in embedded systems. It maintains full calendar functionality including <strong>seconds, minutes, hours, day, date, month, and year with automatic leap-year compensation</strong>. <br><br>The device features <strong>56 bytes of battery-backed non-volatile SRAM</strong>, allowing storage of user data even when the main power supply is removed, making it ideal for backup and low-power applications. <br><br>It communicates via a simple <strong>2-wire I2C serial interface</strong>, enabling easy integration with microcontrollers and minimizing required I/O pins. <br><br>The DS1307N+ includes an internal <strong>power-fail detection circuit</strong> that automatically switches to a backup battery supply when the main power is lost, ensuring continuous timekeeping operation. <br><br>It operates with a main supply voltage of approximately <strong>4.5V to 5.5V</strong> and a backup battery voltage range of <strong>2V to 3.5V</strong>, providing flexibility for various system designs. <br><br>The device also offers a <strong>programmable square-wave output</strong> and supports both <strong>12-hour and 24-hour formats</strong>, making it adaptable for different timing requirements. <br><br>With very low power consumption in backup mode (typically <strong>less than 500nA</strong>), it ensures long battery life in standby conditions. <br><br>Housed in a standard <strong>8-pin PDIP through-hole package</strong>, the DS1307N+ is suitable for prototyping, industrial applications, and easy PCB assembly. <br><br>The <strong>DS1307N+</strong> is widely used in applications such as <strong>industrial controllers, data loggers, embedded systems, consumer electronics, and IoT devices</strong>, where accurate timekeeping with battery backup is essential.
DS1307N+

Description: The DS1307N+ is a reliable real-time clock (RTC) and calendar IC develope ...
Package: TUBE | MOQ: 1000 | MPQ: 50

DS1302Z+ / The DS1302Z+ is a highly integrated <strong>real-time clock (RTC) and calendar IC</strong> developed by <strong>Analog Devices (Maxim Integrated)</strong>, designed for accurate timekeeping in embedded systems and battery-backed applications. It maintains time and date information including <strong>seconds, minutes, hours, day, date, month, and year with leap-year compensation</strong>. <br><br>The device includes <strong>31 bytes of battery-backed static RAM</strong>, allowing storage of user data even when the main power supply is removed, making it ideal for low-power and backup applications. <br><br>The DS1302Z+ communicates via a simple <strong>3-wire serial interface (CE, I/O, SCLK)</strong>, enabling easy integration with microcontrollers and minimizing pin count requirements. <br><br>It operates over a supply voltage range of <strong>2.0V to 5.5V</strong> and features <strong>dual power supply pins (primary and backup)</strong>, allowing seamless switching between main power and battery backup sources. <br><br>The device also supports a <strong>programmable trickle charger</strong> for rechargeable backup sources such as supercapacitors or rechargeable batteries, enhancing system reliability. <br><br>With extremely low power consumption (typically <strong>less than 300nA in timekeeping mode</strong>), the DS1302Z+ is optimized for long battery life in portable and standby systems. <br><br>Packaged in a compact <strong>8-pin SOIC surface-mount form factor</strong>, the DS1302Z+ is suitable for high-density PCB designs and automated assembly processes. <br><br>The <strong>DS1302Z+</strong> is widely used in applications such as <strong>industrial controllers, consumer electronics, IoT devices, data loggers, and embedded systems</strong>, where accurate timekeeping and low-power backup functionality are essential.
DS1302Z+

Description: The DS1302Z+ is a highly integrated real-time clock (RTC) and calendar IC ...
Package: T&R | MOQ: 2500 | MPQ: 2500

DMN6040SSDQ-13 / The DMN6040SSDQ-13 is a high-efficiency <strong>dual N-channel enhancement mode MOSFET</strong> developed by <strong>Diodes Incorporated</strong>, designed for power management and switching applications requiring low conduction losses and fast switching performance. It integrates two independent MOSFETs in a single compact package, enabling space-saving circuit designs. <br><br>The device supports a <strong>drain-source voltage of 60V</strong> and a <strong>continuous drain current of up to 5A per channel</strong>, making it suitable for medium-power switching applications such as DC-DC converters and load switching circuits. <br><br>It features a <strong>low on-resistance (RDS(on)) of approximately 40mΩ at VGS = 10V</strong>, which helps minimize power dissipation and improves overall system efficiency. <br><br>The MOSFET is optimized for <strong>fast switching speed and low input capacitance</strong>, enabling high-frequency operation and efficient power conversion in modern electronic systems. <br><br>The device operates with a <strong>gate-source voltage range up to ±20V</strong> and offers robust performance across a wide temperature range of <strong>-55°C to +150°C</strong>, ensuring reliability in demanding environments. <br><br>Housed in a compact <strong>SOIC-8 surface-mount package</strong>, the DMN6040SSDQ-13 is optimized for automated assembly and high-density PCB layouts. It is also <strong>AEC-Q101 qualified</strong>, making it suitable for automotive-grade applications. <br><br>The <strong>DMN6040SSDQ-13</strong> is widely used in applications such as <strong>DC-DC converters, power management circuits, LED backlighting, load switching, and automotive electronics</strong>, where high efficiency, compact size, and reliable switching performance are required.
DMN6040SSDQ-13

Description: The DMN6040SSDQ-13 is a high-efficiency dual N-channel enhancement mode MOSFET ...
Package: T&R | MOQ: 2500 | MPQ: 2500

DG445DJ-E3 / The DG445DJ-E3 is a high-performance <strong>quad SPST CMOS analog switch</strong> developed by <strong>Vishay Siliconix</strong>, designed for precise and low-error switching of analog signals in a wide range of electronic applications. It integrates <strong>four independent single-pole single-throw (SPST) switches</strong> in a single device, enabling efficient multi-channel signal routing. <br><br>The device features <strong>low on-resistance (typically around 50Ω, max ~85Ω)</strong>, ensuring minimal signal loss and distortion during operation. It supports both <strong>single-supply operation from 5V to 36V and dual-supply operation up to ±20V</strong>, allowing it to handle a wide range of analog signal levels. <br><br>Built using advanced CMOS technology, the DG445DJ-E3 provides <strong>low leakage current (in the picoamp range), low power consumption, and fast switching speeds (typically ~120ns to 250ns)</strong>, making it suitable for high-speed and precision analog applications. <br><br>The switches are <strong>bidirectional</strong>, allowing signals to pass equally well in either direction when enabled, while blocking signals up to the supply rails when disabled. It also features <strong>TTL/CMOS compatible control inputs</strong>, enabling easy integration with digital control systems. <br><br>With <strong>low charge injection and reduced signal distortion</strong>, the device is particularly well suited for sensitive circuits such as sample-and-hold and data acquisition systems. <br><br>Housed in a <strong>16-pin PDIP through-hole package</strong>, the DG445DJ-E3 is ideal for prototyping, industrial equipment, and applications requiring robust mechanical mounting. <br><br>The <strong>DG445DJ-E3</strong> is widely used in applications such as <strong>data acquisition systems, audio signal routing, test and measurement equipment, communication systems, and industrial control electronics</strong>, where reliable multi-channel analog switching is required.
DG445DJ-E3

Description: The DG445DJ-E3 is a high-performance quad SPST CMOS analog switch develop ...
Package: TUBE | MOQ: 1250 | MPQ: 25

DG418DY-E3 / The DG418DY-E3 is a high-performance <strong>CMOS analog switch (SPST – single pole single throw)</strong> developed by <strong>Vishay Siliconix</strong>, designed for precision switching of analog signals in a wide range of electronic systems. It provides a <strong>1:1 switch configuration</strong>, allowing efficient routing of analog signals with minimal distortion. <br><br>The device features a <strong>low on-resistance (typically ~20Ω, max ~35Ω)</strong>, ensuring low signal loss and high accuracy in signal transmission. It supports both <strong>single and dual supply operation</strong>, with voltage ranges up to approximately <strong>±15V</strong>, making it suitable for handling a wide variety of analog signal levels. <br><br>Built using advanced CMOS technology, the DG418DY-E3 offers <strong>low leakage current, low power consumption, and fast switching times (typically under 200ns)</strong>, enabling high-speed and energy-efficient operation in demanding applications. <br><br>The switch is <strong>bidirectional</strong>, meaning it can conduct signals equally well in both directions when enabled, while effectively blocking signals when turned off. It also provides <strong>TTL/CMOS compatible control logic</strong>, allowing easy integration with digital control systems. <br><br>With its <strong>wide dynamic range, low signal distortion, and reliable switching performance</strong>, the DG418DY-E3 is ideal for precision analog signal routing. <br><br>Packaged in a compact <strong>8-pin SOIC surface-mount form factor</strong>, it is optimized for space-constrained PCB layouts and automated assembly processes. <br><br>The <strong>DG418DY-E3</strong> is widely used in applications such as <strong>data acquisition systems, sample-and-hold circuits, industrial instrumentation, audio signal routing, and test equipment</strong>, where accurate and reliable analog switching is required.
DG418DY-E3

Description: The DG418DY-E3 is a high-performance CMOS analog switch (SPST – single pole sing ...
Package: TUBE | MOQ: 1000 | MPQ: 100

DG406DYZ / The DG406DYZ is a high-performance <strong>16-channel CMOS analog multiplexer</strong> developed by <strong>Renesas Electronics</strong>, designed for routing analog signals in data acquisition, instrumentation, and communication systems. It allows one of sixteen input channels to be connected to a common output using digital control signals. <br><br>The device features <strong>bidirectional analog switches</strong> with low on-resistance (typically around <strong>100Ω max</strong>), enabling efficient signal transmission with minimal distortion and loss. <br><br>It supports both <strong>single-supply (5V to 34V) and dual-supply (±5V to ±20V) operation</strong>, providing flexibility for handling a wide range of analog signal levels. <br><br>The DG406DYZ incorporates a <strong>TTL/CMOS-compatible digital decoder</strong> for channel selection along with an <strong>enable (EN) input</strong>, allowing multiple devices to be cascaded and controlled efficiently in complex systems. <br><br>With a <strong>fast switching time (~200ns to 300ns)</strong> and low charge injection, the device is well suited for precision applications such as sample-and-hold circuits and signal multiplexing. <br><br>The multiplexer also features <strong>break-before-make switching</strong>, preventing signal overlap between channels and protecting sensitive circuits during switching transitions. <br><br>Packaged in a compact <strong>28-pin SOIC surface-mount form factor</strong>, the DG406DYZ is optimized for high-density PCB layouts and automated assembly processes. <br><br>The <strong>DG406DYZ</strong> is widely used in applications such as <strong>data acquisition systems, industrial instrumentation, audio signal routing, test equipment, and communication systems</strong>, where reliable multi-channel analog switching is required.
DG406DYZ

Description: The DG406DYZ is a high-performance 16-channel CMOS analog multiplexer dev ...
Package: TUBE | MOQ: 520 | MPQ: 260

DAC6571IDBVT / The DAC6571IDBVT is a compact and efficient <strong>10-bit digital-to-analog converter (DAC)</strong> developed by <strong>Texas Instruments</strong>, designed for low-power embedded applications requiring accurate voltage output. It features a single DAC channel with buffered output, enabling precise analog signal generation. <br><br>The device operates over a wide supply voltage range of <strong>2.7V to 5.5V</strong>, making it compatible with both low-voltage and standard logic systems. It provides a <strong>rail-to-rail output</strong>, allowing maximum dynamic range based on the supply voltage. <br><br>Built on a <strong>string DAC architecture</strong>, the DAC6571 ensures monotonic performance with reliable linearity characteristics. It supports a <strong>2-wire I2C-compatible interface</strong>, enabling simple integration with microcontrollers, DSPs, and FPGA-based systems. <br><br>The converter offers fast response with a typical <strong>settling time in the microsecond range</strong>, making it suitable for real-time control and signal generation applications. It also features <strong>low power consumption</strong>, which is ideal for battery-powered and portable devices. <br><br>Housed in a miniature <strong>SOT-23-6 surface-mount package</strong>, the DAC6571IDBVT is optimized for space-constrained PCB layouts and automated manufacturing processes. <br><br>The <strong>DAC6571IDBVT</strong> is widely used in applications such as <strong>industrial process control, programmable voltage sources, sensor calibration, portable instruments, and embedded signal generation systems</strong>, where compact size, low power, and reliable analog output are required.
DAC6571IDBVT

Description: The DAC6571IDBVT is a compact and efficient 10-bit digital-to-analog converter (DA ...
Package: T&R | MOQ: 250 | MPQ: 250

DAC101C081CIMK/NOPB / The DAC101C081CIMK is a compact and efficient <strong>10-bit digital-to-analog converter (DAC)</strong> developed by <strong>Texas Instruments</strong>, designed for low-power and space-constrained embedded applications. It provides a single-channel buffered voltage output, making it suitable for precise signal generation and control systems. <br><br>The device operates over a wide supply voltage range of <strong>2.7V to 5.5V</strong>, ensuring compatibility with both low-voltage and standard logic systems. It uses the supply voltage as a reference, enabling <strong>rail-to-rail output swing</strong> and maximizing dynamic range. <br><br>Built on a <strong>string DAC architecture</strong>, the DAC101C081CIMK ensures monotonic performance across its full resolution with typical linearity characteristics suitable for precision applications. It features a <strong>settling time of approximately 6µs</strong>, allowing fast response in real-time systems. <br><br>The device supports a <strong>2-wire I2C-compatible interface</strong>, with standard, fast, and high-speed communication modes, enabling easy integration with microcontrollers, DSPs, and FPGA platforms. <br><br>Designed for ultra-low power operation, it consumes as little as <strong>~156µA at 3.3V</strong>, making it ideal for battery-powered and energy-efficient applications. It also includes <strong>power-down modes</strong> to further reduce consumption when not in active use. <br><br>Housed in a miniature <strong>TSOT-23-6 surface-mount package</strong>, the DAC101C081CIMK is optimized for high-density PCB layouts and automated manufacturing processes. <br><br>The <strong>DAC101C081CIMK</strong> is widely used in applications such as <strong>programmable voltage sources, sensor calibration, industrial control systems, portable instruments, and embedded signal generation</strong>, where low power consumption, small size, and reliable analog output are required.
DAC101C081CIMK/NOPB

Description: The DAC101C081CIMK is a compact and efficient 10-bit digital-to-analog converter ( ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD712JRZ / The AD712JRZ is a high-performance <strong>dual precision operational amplifier</strong> developed by <strong>Analog Devices</strong>, designed for accurate signal amplification in analog and mixed-signal applications. It utilizes <strong>BiFET (bipolar input FET) technology</strong>, combining the low input bias current of FETs with the high gain and stability of bipolar devices. <br><br>The device features <strong>low input offset voltage and low drift characteristics</strong>, achieved through advanced trimming techniques, making it suitable for precision measurement and instrumentation systems. <br><br>With a <strong>high slew rate (~16 V/µs) and wide bandwidth (~3 MHz)</strong>, the AD712JRZ delivers fast response and stable performance in dynamic signal processing applications. <br><br>The amplifier operates with a <strong>wide supply voltage range (typically ±5V to ±18V)</strong>, allowing flexibility in both single-supply and dual-supply circuit designs. It also offers <strong>high open-loop gain and low noise performance</strong>, making it ideal for high-accuracy analog front-end circuits. <br><br>Housed in a compact <strong>8-pin SOIC surface-mount package</strong>, the AD712JRZ is suitable for space-constrained PCB layouts and automated assembly processes. <br><br>The <strong>AD712JRZ</strong> is widely used in applications such as <strong>instrumentation amplifiers, active filters, data acquisition systems, audio processing, and precision signal conditioning circuits</strong>, where low noise, high speed, and accuracy are essential.
AD712JRZ

Description: The AD712JRZ is a high-performance dual precision operational amplifier d ...
Package: TUBE | MOQ: 490 | MPQ: 98

DAC082S085CIMMX/NOPB / The DAC082S085CIMMX/NOPB is a compact and efficient <strong>dual-channel 8-bit digital-to-analog converter (DAC)</strong> developed by <strong>Texas Instruments</strong>, designed for precision voltage output applications in embedded and industrial systems. It provides two independent DAC channels with buffered voltage outputs for flexible signal generation. <br><br>The device operates from a single supply voltage range of <strong>2.7V to 5.5V</strong>, making it compatible with a wide variety of low-voltage and standard logic systems. It features a <strong>rail-to-rail output amplifier</strong>, enabling maximum output swing and improved signal accuracy. <br><br>Built on a <strong>string DAC architecture</strong>, the DAC082S085 ensures monotonic performance and low non-linearity, with typical specifications including <strong>±0.5 LSB INL and fast settling time of approximately 4.5µs</strong>, suitable for real-time control and signal generation tasks. <br><br>The device supports a high-speed <strong>3-wire serial interface (SPI, QSPI, MICROWIRE, DSP compatible)</strong> with clock rates up to <strong>40 MHz</strong>, enabling seamless integration with microcontrollers, DSPs, and FPGA systems. <br><br>Designed for low-power operation, it consumes as little as <strong>0.6 mW at 3V</strong>, making it ideal for battery-powered and energy-efficient applications. It also includes <strong>power-down modes and power-on reset functionality</strong> for improved system reliability. <br><br>Packaged in a compact <strong>10-pin VSSOP surface-mount package</strong>, the DAC082S085CIMMX/NOPB is optimized for space-constrained PCB layouts and automated assembly processes. <br><br>The <strong>DAC082S085CIMMX/NOPB</strong> is widely used in applications such as <strong>programmable voltage sources, digital gain and offset adjustment, industrial control systems, instrumentation, and embedded signal generation</strong>, where low power, compact size, and reliable analog output are required.
DAC082S085CIMMX/NOPB

Description: The DAC082S085CIMMX/NOPB is a compact and efficient dual-channel 8-bit digital-to- ...
Package: T&R | MOQ: 3500 | MPQ: 3500

EP4CGX150CF23I7N / The EP4CGX150CF23I7N is a high-performance <strong>FPGA (Field Programmable Gate Array)</strong> from the <strong>Intel (formerly Altera) Cyclone IV GX family</strong>, designed for high-speed communication, signal processing, and embedded system applications. It offers a powerful combination of logic density, transceiver capability, and energy efficiency. <br><br>The device integrates approximately <strong>149,760 logic elements and 9,360 LABs (Logic Array Blocks)</strong>, providing substantial programmable resources for complex digital designs and hardware acceleration. It also includes around <strong>6.6 Mbits of embedded memory</strong>, enabling efficient buffering and data processing. <br><br>The EP4CGX150CF23I7N features up to <strong>270 user I/O pins</strong>, allowing extensive connectivity with external peripherals such as memory, ADCs, DACs, and communication interfaces. It operates with a core voltage of approximately <strong>1.2V (1.15V–1.25V range)</strong>, ensuring low power consumption while maintaining high performance. <br><br>One of its key advantages is the integration of <strong>high-speed serial transceivers (up to 3.125 Gbps)</strong>, making it suitable for communication protocols, high-speed data links, and networking applications. It also supports <strong>PLL blocks, DSP capabilities, and advanced clock management</strong> for flexible system design. <br><br>The FPGA supports operating frequencies up to approximately <strong>200 MHz</strong>, depending on design implementation, and is rated for industrial environments with a temperature range of <strong>-40°C to +100°C</strong>. <br><br>Packaged in a compact <strong>484-ball FBGA surface-mount form factor</strong>, the EP4CGX150CF23I7N is optimized for high-density PCB layouts and reliable high-speed signal integrity. <br><br>The <strong>EP4CGX150CF23I7N</strong> is widely used in applications such as <strong>high-speed communication systems, industrial automation, video and image processing, data acquisition, networking equipment, and FPGA-based embedded platforms</strong>, where performance, flexibility, and integration are critical.
EP4CGX150CF23I7N

Description: The EP4CGX150CF23I7N is a high-performance FPGA (Field Programmable Gate Array) ...
Package: TRAY | MOQ: 60 | MPQ: 60

CD40106BPWR / The CD40106BPWR is a versatile <strong>CMOS hex Schmitt-trigger inverter</strong> developed by <strong>Texas Instruments</strong>, designed for signal conditioning, waveform shaping, and noise-immune digital logic applications. It integrates <strong>six independent inverter gates</strong> with Schmitt-trigger inputs in a single package. <br><br>The device features <strong>Schmitt-trigger input hysteresis</strong>, allowing it to convert slow or noisy input signals into clean, fast digital transitions. This makes it ideal for applications such as oscillators, pulse shaping, and debounce circuits. <br><br>It operates over a wide supply voltage range of <strong>3V to 18V</strong>, providing flexibility for both low-voltage and standard CMOS logic systems. The IC offers high noise immunity (greater than 50%) and stable switching thresholds across different operating conditions. <br><br>The CD40106BPWR supports <strong>low power consumption with very low quiescent current (typically in microamp range)</strong>, making it suitable for battery-powered and energy-efficient designs. It also provides <strong>symmetrical output characteristics and reliable propagation delay performance</strong> for consistent signal processing. <br><br>Packaged in a compact <strong>14-pin TSSOP surface-mount form factor</strong>, the device is optimized for automated assembly and space-constrained PCB layouts. <br><br>The <strong>CD40106BPWR</strong> is widely used in applications such as <strong>oscillator circuits, waveform generators, debounce circuits, signal conditioning systems, timing circuits, and general-purpose digital logic designs</strong>, where clean signal transitions and noise immunity are essential.
CD40106BPWR

Description: The CD40106BPWR is a versatile CMOS hex Schmitt-trigger inverter develope ...
Package: T&R | MOQ: 2000 | MPQ: 2000

EP4CE10F17I7N / The EP4CE10F17I7N is a cost-effective and power-efficient <strong>FPGA (Field Programmable Gate Array)</strong> from the <strong>Intel (formerly Altera) Cyclone IV E family</strong>, designed for high-volume embedded applications requiring flexible digital logic implementation. It offers a balance between performance, power consumption, and integration. <br><br>The device integrates approximately <strong>10,320 logic elements</strong> and <strong>645 logic array blocks (LABs)</strong>, enabling implementation of complex digital circuits, control logic, and custom hardware acceleration. It also includes about <strong>414 Kbits of embedded memory</strong>, supporting buffering and data processing tasks. <br><br>The EP4CE10F17I7N provides up to <strong>179 user I/O pins</strong>, allowing flexible interfacing with external components such as memory devices, sensors, and communication peripherals. It operates with a core voltage range of <strong>1.15V to 1.25V (typ. 1.2V)</strong>, ensuring low power consumption while maintaining reliable performance. <br><br>Built on advanced FPGA architecture, the device supports <strong>DSP processing blocks, PLLs, and high-speed I/O standards</strong>, enabling applications such as signal processing, communication interfaces, and embedded control systems. It can operate at frequencies up to approximately <strong>200 MHz</strong>, depending on design implementation. <br><br>Packaged in a compact <strong>256-ball FBGA surface-mount form factor</strong>, the EP4CE10F17I7N is optimized for high-density PCB layouts and automated manufacturing processes. It supports an industrial temperature range of <strong>-40°C to +100°C</strong>, making it suitable for harsh environments. <br><br>The <strong>EP4CE10F17I7N</strong> is widely used in applications such as <strong>industrial automation, communication systems, embedded control, motor control, data acquisition, and FPGA-based signal processing systems</strong>, where flexibility, reliability, and low power consumption are critical.
EP4CE10F17I7N

Description: The EP4CE10F17I7N is a cost-effective and power-efficient FPGA (Field Programmable ...
Package: TRAY | MOQ: 90 | MPQ: 90

EP3C25U256I7N / The EP3C25U256I7N is a high-performance <strong>FPGA (Field Programmable Gate Array)</strong> from the <strong>Intel (formerly Altera) Cyclone III family</strong>, designed for cost-sensitive and power-efficient embedded applications. It provides a flexible programmable logic platform suitable for a wide range of digital system designs. <br><br>The device features approximately <strong>24,624 logic elements</strong> and <strong>1,539 logic array blocks (LABs)</strong>, enabling complex digital processing, control logic, and custom hardware acceleration. It also includes around <strong>608 Kbits of embedded memory</strong>, supporting buffering, data storage, and signal processing tasks. <br><br>The EP3C25U256I7N offers up to <strong>156 user I/O pins</strong>, allowing extensive interfacing with external components such as ADCs, DACs, memory devices, and communication peripherals. It operates with a core voltage range of approximately <strong>1.15V to 1.25V</strong>, ensuring low power consumption while maintaining high performance. <br><br>With a maximum operating frequency of around <strong>300+ MHz</strong>, the FPGA supports high-speed digital designs and real-time processing applications. Its architecture enables implementation of custom logic functions, DSP algorithms, and hardware interfaces with high efficiency. <br><br>The device is housed in a compact <strong>256-ball UBGA surface-mount package</strong>, optimized for high-density PCB layouts and reliable signal integrity in advanced designs. It supports industrial temperature ranges of <strong>-40°C to +100°C</strong>, making it suitable for harsh environments. <br><br>The <strong>EP3C25U256I7N</strong> is widely used in applications such as <strong>industrial automation, communication systems, embedded processing, video and image processing, data acquisition systems, and FPGA-based control platforms</strong>, where flexibility, performance, and low power consumption are critical.
EP3C25U256I7N

Description: The EP3C25U256I7N is a high-performance FPGA (Field Programmable Gate Array) ...
Package: TRAY | MOQ: 119 | MPQ: 119

AD7606BSTZ-4RL / The AD7606BSTZ-4RL is a high-performance <strong>16-bit analog-to-digital data acquisition system (ADC)</strong> developed by <strong>Analog Devices</strong>, designed for precision signal measurement and industrial data acquisition applications. It integrates multiple analog front-end components into a single chip, simplifying system design and improving accuracy. <br><br>The device features <strong>4 simultaneously sampled input channels</strong> with true bipolar input ranges of <strong>±10V and ±5V</strong>, enabling direct interfacing with a wide range of analog signals without the need for external conditioning circuits. <br><br>It incorporates a <strong>16-bit SAR ADC architecture</strong> with a maximum throughput of <strong>200 kSPS per channel</strong>, ensuring high-resolution and high-speed data conversion for demanding applications. <br><br>The AD7606BSTZ-4RL includes a fully integrated signal chain with <strong>input clamp protection, second-order anti-aliasing filters, track-and-hold amplifiers, and an internal 2.5V reference</strong>, eliminating the need for external analog components and improving system reliability. <br><br>It supports flexible digital communication through <strong>parallel and serial interfaces (SPI, QSPI, MICROWIRE, DSP compatible)</strong>, allowing easy integration with microcontrollers, DSPs, and FPGA systems. <br><br>The device operates from a <strong>single 5V analog supply with a digital interface voltage range of 2.3V to 5.25V</strong>, providing compatibility with various logic levels and simplifying power design. <br><br>Packaged in a compact <strong>64-lead LQFP surface-mount package</strong>, the AD7606BSTZ-4RL is optimized for high-density PCB layouts and industrial-grade applications. <br><br>The <strong>AD7606BSTZ-4RL</strong> is widely used in applications such as <strong>power line monitoring, motor control systems, instrumentation, multi-axis positioning systems, and industrial data acquisition systems</strong>, where precise, simultaneous sampling and high accuracy are critical.
AD7606BSTZ-4RL

Description: The AD7606BSTZ-4RL is a high-performance 16-bit analog-to-digital data acquisition ...
Package: T&R | MOQ: 1500 | MPQ: 1500

CY8C21534-24PVXIT / The CY8C21534-24PVXIT is a highly integrated <strong>8-bit programmable system-on-chip (PSoC™) microcontroller</strong> developed by <strong>Infineon Technologies</strong>, combining analog and digital peripherals with a flexible MCU core in a single device. It is based on the <strong>M8C 8-bit architecture</strong> and is optimized for embedded control applications requiring high integration and configurability. <br><br>The device features <strong>8KB of Flash program memory and 512 bytes of SRAM</strong>, providing sufficient resources for firmware execution and data handling in control-oriented systems. It operates at clock speeds up to <strong>24 MHz</strong>, delivering efficient processing performance for real-time embedded tasks. <br><br>One of its key advantages is the <strong>configurable mixed-signal architecture</strong>, which includes integrated analog blocks such as <strong>10-bit ADCs, comparators, and programmable analog modules</strong>, along with digital peripherals like <strong>PWM, timers, watchdog timer, and communication interfaces (I2C, SPI)</strong>. <br><br>The CY8C21534-24PVXIT supports a wide operating voltage range of <strong>2.4V to 5.25V</strong>, allowing compatibility with both low-voltage and standard logic systems. It also includes an <strong>internal oscillator</strong>, reducing the need for external components and simplifying system design. <br><br>With up to <strong>24 programmable I/O pins</strong>, the device offers flexible interfacing options for sensors, displays, and communication modules. Its <strong>programmable analog and digital routing architecture</strong> enables designers to replace multiple discrete components with a single chip. <br><br>Packaged in a compact <strong>28-pin SSOP surface-mount form factor</strong>, the CY8C21534-24PVXIT is suitable for space-constrained PCB designs and automated assembly processes. <br><br>The <strong>CY8C21534-24PVXIT</strong> is widely used in applications such as <strong>industrial control systems, consumer electronics, human interface devices, sensor processing, and embedded automation systems</strong>, where integration, flexibility, and reduced component count are essential.
CY8C21534-24PVXIT

Description: The CY8C21534-24PVXIT is a highly integrated 8-bit programmable system-on-chip (PS ...
Package: T&R | MOQ: 1000 | MPQ: 1000

C8051F502-IQ / The C8051F502-IQ is a high-performance <strong>8-bit microcontroller based on the 8051 core</strong> developed by <strong>Silicon Labs</strong>, designed for embedded control applications requiring integrated analog and digital peripherals. It combines processing capability with rich peripheral integration in a compact form factor. <br><br>The device features <strong>8KB of Flash program memory, 768 bytes of RAM, and integrated data memory</strong>, providing sufficient resources for control-oriented firmware and real-time applications. It supports execution speeds up to <strong>25 MHz</strong>, delivering efficient performance for embedded tasks. <br><br>The C8051F502-IQ integrates a wide range of peripherals, including <strong>12-bit ADC, comparators, timers, programmable counter array (PCA), and multiple communication interfaces such as UART and SPI</strong>, enabling versatile system design without external components. <br><br>It operates within a supply voltage range of approximately <strong>2.7V to 3.6V</strong>, making it suitable for low-power and portable applications. The device also features <strong>on-chip voltage regulator and internal oscillator</strong>, reducing the need for external circuitry. <br><br>Housed in a compact <strong>32-pin QFN surface-mount package</strong>, the C8051F502-IQ is optimized for space-constrained PCB designs and automated assembly processes. <br><br>The <strong>C8051F502-IQ</strong> is widely used in applications such as <strong>industrial control systems, consumer electronics, sensor interfaces, communication devices, and embedded automation systems</strong>, where compact size, integration, and reliable performance are essential.
C8051F502-IQ

Description: The C8051F502-IQ is a high-performance 8-bit microcontroller based on the 8051 cor ...
Package: TRAY | MOQ: 500 | MPQ: 250

BTA24-600BWRG / The BTA24-600BWRG is a high-performance <strong>TRIAC (bidirectional thyristor)</strong> developed by <strong>STMicroelectronics</strong>, designed for efficient AC power switching and control in industrial and consumer applications. It is capable of handling a <strong>repetitive peak off-state voltage of 600V</strong> and an <strong>RMS on-state current of up to 25A</strong>, making it suitable for medium- to high-power loads. <br><br>The device belongs to the <strong>snubberless TRIAC family</strong>, offering high commutation performance and eliminating the need for external snubber circuits in many inductive load applications. This makes it ideal for controlling motors, transformers, and other inductive equipment. <br><br>It features a <strong>fully insulated TO-220AB package</strong> with an internal ceramic pad, providing electrical isolation up to approximately <strong>2500Vrms</strong> and simplifying thermal management and mounting without additional insulation components. <br><br>The BTA24-600BWRG supports <strong>four-quadrant triggering operation</strong> with a typical gate trigger current around <strong>50mA</strong> and gate trigger voltage near <strong>1.3–1.5V</strong>, allowing easy interfacing with control circuits and microcontroller-based systems. <br><br>With a high surge current capability of up to <strong>250A</strong> and operating temperature range up to <strong>125°C</strong>, the device ensures robust performance under demanding conditions. <br><br>The <strong>BTA24-600BWRG</strong> is widely used in applications such as <strong>motor speed control, light dimmers, heating control systems, solid-state relays, and industrial AC power switching circuits</strong>, where reliable and efficient bidirectional switching is required.
BTA24-600BWRG

Description: The BTA24-600BWRG is a high-performance TRIAC (bidirectional thyristor) d ...
Package: TUBE | MOQ: 1000 | MPQ: 50

EAST1608RWA0 / The EAST1608RWA0 is a compact <strong>bi-color SMD LED (red and white)</strong> manufactured by <strong>Everlight Electronics</strong>, designed for high-density PCB layouts and multi-indication applications. It integrates two independent LEDs in a single package, enabling dual-color indication within minimal board space. <br><br>The device emits <strong>red light (~639nm) and white light</strong>, with typical forward voltages of approximately <strong>1.9V (red) and 2.9V (white)</strong> at a test current of around 5mA, ensuring efficient low-power operation. <br><br>Housed in a miniature <strong>0603 (1608 metric) surface-mount package</strong>, the EAST1608RWA0 measures approximately <strong>1.6mm × 0.8mm</strong>, making it ideal for compact electronic devices and space-constrained designs. <br><br>The LED features a <strong>wide viewing angle of about 120°</strong> and a diffused lens, providing uniform brightness and good visibility across multiple viewing directions. <br><br>Designed for automated production, the component is compatible with <strong>standard SMT reflow soldering processes</strong> and is supplied in tape-and-reel packaging, supporting efficient high-volume manufacturing. <br><br>The <strong>EAST1608RWA0</strong> is widely used in applications such as <strong>status indicators, display backlighting, consumer electronics, communication devices, and compact embedded systems</strong>, where small size and dual-color functionality are required.
EAST1608RWA0

Description: The EAST1608RWA0 is a compact bi-color SMD LED (red and white) manufactur ...
Package: T&R | MOQ: 3000 | MPQ: 3000

19-337C/RSBHGHC-A01/2T / The 19-337C/RSBHGHC-A01/2T is a compact <strong>RGB SMD LED (Red, Green, Blue)</strong> manufactured by <strong>Everlight Electronics</strong>, designed for high-density PCB layouts and multi-color indication applications. It integrates three independent LED chips emitting <strong>624nm red, 530nm green, and 465nm blue light</strong>, enabling full-color mixing and flexible display functionality. <br><br>Housed in a miniature <strong>0606 (1.6 × 1.6 mm) 6-pin surface-mount package</strong>, the device is ideal for compact electronic designs where space optimization and high component density are critical. <br><br>The LED operates with typical forward voltages of approximately <strong>2.05V (red) and 3.2V (green/blue)</strong> at a standard test current of <strong>20mA per channel</strong>, providing efficient brightness with balanced color output. <br><br>Featuring a <strong>wide viewing angle of about 120°</strong> and a clear lens structure, the component ensures uniform light distribution and excellent visibility across different viewing directions. <br><br>The device is built using <strong>InGaN and AlGaInP semiconductor technologies</strong>, ensuring reliable optical performance and long operational lifetime. It supports <strong>standard SMT reflow soldering processes</strong> and is supplied in tape-and-reel packaging for automated assembly. <br><br>The <strong>19-337C/RSBHGHC-A01/2T</strong> is widely used in applications such as <strong>status indicators, display backlighting, consumer electronics, communication devices, and compact embedded systems</strong>, where small size and multi-color illumination are required.
19-337C/RSBHGHC-A01/2T

Description: The 19-337C/RSBHGHC-A01/2T is a compact RGB SMD LED (Red, Green, Blue) ma ...
Package: T&R | MOQ: 2000 | MPQ: 2000

EAST1616RGBA4 / The EAST1616RGBA4 is a compact <strong>RGB SMD LED (Red, Green, Blue)</strong> manufactured by <strong>Everlight Electronics</strong>, designed for high-density PCB layouts and multi-color indication applications. It integrates three independent LED chips emitting <strong>approximately 624nm red, 525nm green, and 470nm blue light</strong>, enabling full-color mixing and versatile display functionality. <br><br>The device is housed in an ultra-miniature <strong>0606 (1.6 × 1.6 mm) surface-mount package</strong>, allowing compact designs, reduced board size, and higher component density in modern electronics. <br><br>It operates with typical forward voltages of around <strong>2.05V (red) and 3.25V (green/blue)</strong> at a standard drive current of <strong>20mA per channel</strong>, providing efficient light output with low power consumption. <br><br>The LED features a <strong>wide viewing angle of approximately 120°</strong>, ensuring uniform brightness and visibility across multiple directions, making it suitable for display and indicator applications. <br><br>Built using <strong>AlGaInP and InGaN semiconductor technologies</strong>, the EAST1616RGBA4 delivers stable optical performance and long operational lifetime. It supports <strong>standard SMT reflow soldering processes</strong> and is supplied in tape-and-reel packaging for automated assembly. <br><br>The <strong>EAST1616RGBA4</strong> is widely used in applications such as <strong>LCD backlighting, status indicators, consumer electronics, telecommunications equipment, and compact embedded systems</strong>, where small size and multi-color illumination are required.
EAST1616RGBA4

Description: The EAST1616RGBA4 is a compact RGB SMD LED (Red, Green, Blue) manufacture ...
Package: T&R | MOQ: 2000 | MPQ: 2000

EAST1616RGBA3 / The EAST1616RGBA3 is a compact <strong>RGB SMD LED (Red, Green, Blue)</strong> manufactured by <strong>Everlight Electronics</strong>, designed for high-density PCB layouts and multi-color indication applications. It integrates three LEDs in a single package, emitting light at approximately <strong>632nm (red), 518nm (green), and 468nm (blue)</strong>, enabling full-color mixing and versatile display functionality. <br><br>The device is housed in an ultra-miniature <strong>0606 (1.6 × 1.6 mm) surface-mount package</strong> with a height of around <strong>0.35 mm</strong>, making it ideal for compact electronic designs and space-constrained applications. <br><br>It operates with typical forward voltages of approximately <strong>1.95V (red) and 2.8V (green/blue)</strong> at a test current of <strong>5mA per channel</strong>, ensuring low power consumption and efficient light output. <br><br>Featuring a <strong>wide viewing angle of about 120°</strong> and a clear lens structure, the EAST1616RGBA3 provides uniform brightness and excellent visibility across multiple viewing directions. <br><br>The LED uses <strong>InGaN and AlGaInP semiconductor technologies</strong> for reliable optical performance and long operational life. It supports <strong>standard SMT reflow soldering processes</strong> and is supplied in tape-and-reel packaging for automated assembly. <br><br>The <strong>EAST1616RGBA3</strong> is widely used in applications such as <strong>status indicators, LCD backlighting, mobile devices, wearable electronics, communication equipment, and compact consumer electronics</strong>, where small size and multi-color illumination are required.
EAST1616RGBA3

Description: The EAST1616RGBA3 is a compact RGB SMD LED (Red, Green, Blue) manufacture ...
Package: T&R | MOQ: 2000 | MPQ: 2000

HLMP1700/QT264-3ID/T222 / The HLMP1700/QT264-3ID/T222 is a reliable <strong>red through-hole LED</strong> manufactured by <strong>Everlight Electronics</strong>, designed for general indication and low-power lighting applications. It features a classic <strong>3mm (T-1) radial package</strong> with a diffused lens, providing uniform light output and easy integration into PCB designs. <br><br>The device emits <strong>red الضوء with a peak wavelength around 635nm</strong>, ensuring clear visibility for status indicators and display elements. It utilizes <strong>AlGaInP semiconductor technology</strong> to deliver stable optical performance and long operational life. <br><br>Operating at a typical forward voltage of <strong>approximately 1.8V</strong> and a low test current of <strong>2mA</strong>, the HLMP1700 is optimized for <strong>low-power consumption applications</strong>, making it ideal for battery-powered devices and energy-efficient designs. <br><br>The LED provides a <strong>wide viewing angle of about 50°</strong> with a domed, diffused lens structure, ensuring consistent brightness and visibility from multiple angles. <br><br>Designed for <strong>through-hole mounting</strong>, the component offers strong mechanical stability and ease of manual or wave soldering, making it suitable for prototyping and traditional PCB assembly processes. <br><br>The <strong>HLMP1700/QT264-3ID/T222</strong> is widely used in applications such as <strong>status indicators, control panels, consumer electronics, industrial equipment, and communication devices</strong>, where reliable, low-power red illumination is required.
HLMP1700/QT264-3ID/T222

Description: The HLMP1700/QT264-3ID/T222 is a reliable red through-hole LED manufactur ...
Package: BULK | MOQ: 1000 | MPQ: 250

61-238/LK2C-B56706F4GB2/ET / The 61-238/LK2C-B56706F4GB2/ET is a high-brightness <strong>cool white SMD LED</strong> manufactured by <strong>Everlight Electronics</strong>, designed for lighting, indication, and illumination applications requiring reliable and efficient performance. It emits light in the <strong>5650K to 7000K color temperature range</strong>, providing a crisp cool white output suitable for modern electronic designs. <br><br>The device is built in a <strong>5050 (6-PLCC) surface-mount package</strong> with a compact footprint of approximately <strong>5.0 × 5.0 mm</strong>, making it ideal for high-density PCB layouts and automated assembly processes. <br><br>It operates with a typical forward voltage of around <strong>3.25V</strong> and a drive current of <strong>3 × 20mA</strong>, delivering strong luminous performance with a typical intensity of up to <strong>~7100 mcd</strong>. <br><br>Featuring a <strong>wide viewing angle of approximately 120°</strong> and a diffused lens design, the LED ensures uniform light distribution and consistent brightness across various viewing positions. <br><br>The component utilizes <strong>InGaN technology with phosphor conversion</strong> to generate white light, offering low power consumption and stable optical characteristics. It supports <strong>standard IR reflow soldering</strong> and is compliant with <strong>RoHS environmental standards</strong>. <br><br>The <strong>61-238/LK2C-B56706F4GB2/ET</strong> is widely used in applications such as <strong>general lighting, decorative lighting, indicators, backlighting, consumer electronics, and industrial control panels</strong>, where high brightness, efficiency, and compact size are required.
61-238/LK2C-B56706F4GB2/ET

Description: The 61-238/LK2C-B56706F4GB2/ET is a high-brightness cool white SMD LED ma ...
Package: T&R | MOQ: 800 | MPQ: 800

QTLP650C4TR/FC15-21SYGC/S530-E2/TR8 / The QTLP650C4TR/FC15-21SYGC/S530-E2/TR8 is a compact <strong>green SMD LED</strong> manufactured by <strong>Everlight Electronics</strong>, designed for indicator and backlighting applications in modern electronic systems. It emits light at a dominant wavelength of approximately <strong>570nm</strong>, providing clear and visible green illumination. <br><br>Housed in a standard <strong>1206 (3216 metric) surface-mount package</strong>, this LED is suitable for automated assembly and high-density PCB layouts. Its compact dimensions allow integration into space-constrained designs while maintaining reliable optical performance. <br><br>The device operates with a typical forward voltage of around <strong>2.1V</strong> at a test current of <strong>20mA</strong>, offering efficient light output with low power consumption. It delivers a typical luminous intensity of approximately <strong>10 mcd</strong>, making it suitable for status indication and low-light applications. <br><br>Featuring a <strong>wide viewing angle of about 140°</strong>, the QTLP650C4TR ensures uniform light distribution and good visibility from multiple directions. The clear lens design enhances brightness and directional clarity in various lighting conditions. <br><br>The component is supplied in <strong>tape-and-reel packaging</strong> and is fully compatible with standard SMT reflow soldering processes, supporting efficient mass production. It is also compliant with modern environmental standards such as RoHS. <br><br>The <strong>QTLP650C4TR/FC15-21SYGC/S530-E2/TR8</strong> is widely used in applications such as <strong>status indicators, consumer electronics, telecommunications devices, control panels, and industrial equipment</strong>, where compact size, reliability, and consistent green illumination are required.
QTLP650C4TR/FC15-21SYGC/S530-E2/TR8

Description: The QTLP650C4TR/FC15-21SYGC/S530-E2/TR8 is a compact green SMD LED manufa ...
Package: T&R | MOQ: 2000 | MPQ: 2000

19-337C/RSBHGHC-A88/4T / The 19-337C/RSBHGHC-A88/4T is a compact <strong>RGB SMD LED (Red, Green, Blue)</strong> manufactured by <strong>Everlight Electronics</strong>, designed for high-density PCB applications and multi-color illumination systems. It integrates three LEDs in a single package, emitting <strong>625nm red, 530nm green, and 470nm blue light</strong>, enabling full-color mixing and versatile display capabilities. <br><br>This device is housed in a miniature <strong>1616 (0606 metric) 6-pin surface-mount package</strong> with dimensions of approximately <strong>1.6 × 1.6 × 0.5 mm</strong>, making it ideal for compact electronic designs and space-constrained applications. <br><br>The LED operates with typical forward voltages of <strong>~2.0V (red) and ~2.9V (green/blue)</strong> at a test current of <strong>20mA per channel</strong>, delivering balanced brightness levels suitable for indicator and display use. <br><br>Featuring a <strong>wide viewing angle of approximately 120°</strong> and a clear lens design, the component provides uniform light distribution and high visibility across different viewing positions. <br><br>The device is compatible with <strong>standard reflow soldering processes</strong> and supplied in tape-and-reel packaging, supporting automated SMT assembly. It is also compliant with <strong>RoHS and halogen-free standards</strong>, ensuring environmental reliability. <br><br>The <strong>19-337C/RSBHGHC-A88/4T</strong> is widely used in applications such as <strong>status indicators, backlighting for LCDs and switches, consumer electronics, wearable devices, and communication equipment</strong>, where compact size and multi-color functionality are required.
19-337C/RSBHGHC-A88/4T

Description: The 19-337C/RSBHGHC-A88/4T is a compact RGB SMD LED (Red, Green, Blue) ma ...
Package: T&R | MOQ: 4000 | MPQ: 4000

EAST16084WB0 / The EAST16084WB0 is a compact white SMD LED from Everlight Electronics in a 0603 (1.6 × 0.8 mm) package, designed for indicator and backlighting applications. It operates at a typical forward voltage of ~2.8 V (2.6–3.0 V range) with a test current of 5 mA, and supports up to 10 mA forward current. The device provides luminous intensity in the range of approximately 90 to 180 mcd and features a wide viewing angle of about 130°, ensuring uniform light output. <br><br> Mechanically, the LED has a low-profile SMD structure (~0.5 mm height) with a rectangular diffused lens (approx. 1.6 × 0.8 mm footprint), optimized for high-density PCB layouts and automated assembly. It supports reflow soldering (up to 260°C), operates in a temperature range of -40°C to +85°C, and comes in tape-and-reel packaging for efficient mass production.
EAST16084WB0

Description: The EAST16084WB0 is a compact white SMD LED from Everlight Electronics in a 0603 (1.6 × 0 ...
Package: T&R | MOQ: 3000 | MPQ: 3000

EAST1616RGBA8 / The EAST1616RGBA8 is a compact RGB SMD LED from Everlight Electronics in a 1.6 × 1.6 mm (1616) package, designed for high-density indicator and backlighting applications. It emits red (≈624 nm), green (≈525 nm), and blue (≈468 nm) light with typical forward voltages of 2.05 V (red) and 3.2 V (green/blue) at 20 mA. Typical luminous intensity values are around 106 mcd (red), 212 mcd (green), and 67 mcd (blue), with a wide viewing angle of 120° for uniform light output. <br><br> Mechanically, the device features a low-profile SMD package (approx. 1.6 × 1.6 mm footprint, ~0.35–0.45 mm height) with a diffused lens and 6-pad configuration, enabling precise color control and reliable PCB mounting. It supports reflow soldering and operates within a temperature range of -40°C to +85°C, making it suitable for compact consumer electronics, indicators, and display backlighting applications.
EAST1616RGBA8

Description: The EAST1616RGBA8 is a compact RGB SMD LED from Everlight Electronics in a 1.6 × 1.6 mm ( ...
Package: T&R | MOQ: 2000 | MPQ: 2000

EASR3212RGBA0 / The EASR3212RGBA0 is a compact RGB SMD LED from Everlight Electronics in a 3212 (3.2 × 1.25 mm) package, designed for indicator and backlighting applications. It emits red (624 nm), green (525 nm), and blue (470 nm) light with typical forward voltages of 2.0 V (red) and 3.3 V (green/blue), operating at 20 mA per channel. Typical luminous intensity is approximately 100 mcd (red), 200 mcd (green), and 65 mcd (blue), with a wide viewing angle of 130° for uniform light distribution. Mechanically, the device features a 4-pad SMD (no-lead) structure with a maximum height of ~1.2 mm and a clear lens, enabling compact and low-profile PCB designs. The package is optimized for automated assembly and reflow soldering, supporting high-density layouts and reliable mounting in applications such as LCD backlighting, indicators, and compact electronic devices.
EASR3212RGBA0

Description: The EASR3212RGBA0 is a compact RGB SMD LED from Everlight Electronics in a 3212 (3.2 × 1. ...
Package: T&R | MOQ: 2000 | MPQ: 2000













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |