All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

AT89C5115-RATUM / The AT89C5115-RATUM is an 8-bit microcontroller based on the enhanced 8051 core, integrating a full-speed USB 2.0 device controller for embedded communication applications. It features 16KB Flash program memory and 512 bytes of internal RAM, operating at a maximum clock frequency of 48 MHz with an internal PLL for USB functionality. The device operates with a supply voltage range of 3.0V to 5.5V and supports USB data transfer rates up to 12 Mbps. It includes multiple peripherals such as UART, SPI interface, timers/counters, programmable I/O ports, watchdog timer, and interrupt controller. The microcontroller supports in-system programming (ISP) and in-application programming (IAP), with low power consumption modes including idle and power-down. Typical operating current is around 25 mA. Operating temperature range is -40°C to +85°C, and the TQFP-64 package allows high pin-count integration, making it suitable for USB devices, embedded control systems, and industrial communication applications.
AT89C5115-RATUM

Description: The AT89C5115-RATUM is an 8-bit microcontroller based on the enhanced 8051 core, integrati ...
Package: TRAY | MOQ: 250 | MPQ: 250

AT89C2051-24PU / The AT89C2051-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 2KB of Flash program memory and 128 bytes of internal RAM. It operates at a maximum clock frequency of 24 MHz and supports a wide supply voltage range of 2.7V to 6.0V. The device includes 15 programmable I/O lines, two 16-bit timers/counters, a full-duplex UART serial interface, and an on-chip analog comparator. It provides low power operation with idle and power-down modes, and typical operating current around 20 mA at 5V and 12 MHz. The microcontroller supports ISP programming and offers high endurance Flash memory with up to 1000 write/erase cycles. Operating temperature range is -40°C to +85°C, and the DIP-20 package makes it suitable for prototyping, embedded control systems, industrial applications, and educational development projects.
AT89C2051-24PU

Description: The AT89C2051-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 2 ...
Package: TUBE | MOQ: 720 | MPQ: 18

IRF7240TRPBF / The IRF7240TRPBF is a P-channel HEXFET® power MOSFET designed for high-efficiency power management and load switching applications. It features a drain-source voltage (VDS) of -40V and continuous drain current up to -10.5A, with very low on-resistance of approximately 15 mΩ at VGS = -10V, enabling minimal conduction losses and high efficiency . The device supports gate-source voltage up to ±20V and has a threshold voltage of around -1V to -3V, allowing logic-level operation. It offers typical gate charge of approximately 73 nC and power dissipation up to 2.5W, with fast switching performance suitable for high-frequency applications . The MOSFET operates over a wide temperature range of -55°C to +150°C and utilizes an optimized SOIC-8 package for improved thermal performance and compact PCB layout . It is widely used in battery management systems, DC-DC converters, and general power switching applications.
IRF7240TRPBF

Description: The IRF7240TRPBF is a P-channel HEXFET® power MOSFET designed for high-efficiency power m ...
Package: T&R | MOQ: 4000 | MPQ: 4000

SI4401FDY-T1-GE3 / The SI4401FDY-T1-GE3 is a P-channel TrenchFET® Gen III power MOSFET designed for high-efficiency switching and load management applications. It features a drain-source voltage (VDS) of -40V and continuous drain current up to -9.9A (TA) and -14A (TC), with low on-resistance of approximately 11.8 mΩ typical and 14.2 mΩ max at VGS = -10V, ensuring minimal conduction losses. The device supports gate-source voltage up to ±20V and has a threshold voltage range of approximately -1V to -2.3V, allowing logic-level drive compatibility. It offers fast switching performance with total gate charge around 66–100 nC and input capacitance approximately 4000 pF. Maximum power dissipation is about 2.5W (TA) to 5W (TC), and it operates over a wide temperature range from -55°C to +150°C. Packaged in SOIC-8, it is suitable for battery management, DC-DC converters, load switching, and power control circuits.
SI4401FDY-T1-GE3

Description: The SI4401FDY-T1-GE3 is a P-channel TrenchFET® Gen III power MOSFET designed for high-eff ...
Package: T&R | MOQ: 2500 | MPQ: 2500

FDS4435BZ / The FDS4435BZ is a P-channel enhancement-mode PowerTrench MOSFET designed for high-efficiency power management and load switching applications. It features a drain-source voltage (VDS) of -30V and continuous drain current of up to -8.8A, with very low on-resistance of approximately 20 mΩ at VGS = -10V and 35 mΩ at VGS = -4.5V, ensuring low conduction losses. The device supports a wide gate-source voltage range of ±25V and has a threshold voltage around -1V to -3V. It offers fast switching performance with gate charge around 40 nC and optimized trench technology for reduced switching losses. Maximum power dissipation is approximately 2.5W, and it operates over a temperature range of -55°C to +150°C . Packaged in SOIC-8, it is ideal for battery-powered systems, DC-DC converters, notebook power management, and load switching applications.
FDS4435BZ

Description: The FDS4435BZ is a P-channel enhancement-mode PowerTrench MOSFET designed for high-efficie ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MDS3652URH / Single P-Channel Trench MOSFET, -30V, -11A, 17mOhm, MDS3652, Magnachip
MDS3652URH

Description: Single P-Channel Trench MOSFET, -30V, -11A, 17mOhm, MDS3652, Magnachip ...
Package: T&R | MOQ: 3000 | MPQ: 3000

AO4882 / The AO4882 is a dual N-channel enhancement-mode power MOSFET designed using advanced trench technology for high efficiency and low switching losses. It features a drain-source voltage (VDS) of 40V and continuous drain current up to 8A per channel, with low on-resistance of typically 19 mΩ at VGS = 10V and 27 mΩ at VGS = 4.5V, enabling efficient power handling. The device supports gate-source voltage up to ±20V and has a low threshold voltage range of approximately 1.4V to 2.4V, making it suitable for logic-level applications. It offers fast switching performance with low gate charge (~6.5 nC at 10V) and low input capacitance (~415 pF), ensuring high-speed operation. Power dissipation is approximately 2W, and it operates over a wide temperature range of -55°C to +150°C. Packaged in SOIC-8, it integrates two MOSFETs in a compact footprint, making it ideal for DC-DC converters, load switching, battery management, and power control applications.
AO4882

Description: The AO4882 is a dual N-channel enhancement-mode power MOSFET designed using advanced trenc ...
Package: T&R | MOQ: 3000 | MPQ: 3000

AO4459 / The AO4459 is a P-channel enhancement-mode power MOSFET designed for load switching and power management applications, utilizing advanced trench technology for low on-resistance and high efficiency. It features a drain-source voltage (VDS) of -30V and continuous drain current of up to -6.5A, with low RDS(on) typically below 46 mΩ at VGS = -10V, minimizing conduction losses. The device supports gate-source voltage up to ±20V and has a threshold voltage around -1V to -2.4V, enabling logic-level operation. It offers fast switching characteristics with low gate charge and rise time around 5–10 ns, making it suitable for high-frequency switching. Power dissipation is approximately 3.1W, and it operates over a wide temperature range from -55°C to +150°C. Packaged in SOIC-8, it is ideal for battery protection, load switching, DC-DC converters, and portable power applications.
AO4459

Description: The AO4459 is a P-channel enhancement-mode power MOSFET designed for load switching and po ...
Package: T&R | MOQ: 3000 | MPQ: 3000

DMN2029USD-13 / The DMN2029USD-13 is a dual N-channel enhancement-mode power MOSFET designed for high-efficiency switching and power management applications. It features a drain-source voltage (VDS) of 20V and continuous drain current of up to 5.8A per channel, with low on-resistance of approximately 25 mΩ at VGS = 4.5V, enabling reduced conduction losses. The device supports gate-source voltage up to ±8V and has a low threshold voltage around 1.5V, making it suitable for logic-level drive applications. It offers fast switching performance with typical gate charge around 10–18 nC and input capacitance approximately 1170 pF . The maximum power dissipation is about 1.2W, and it operates over a wide temperature range from -55°C to +150°C . Packaged in SOIC-8, it integrates two MOSFETs in a compact footprint, making it ideal for DC-DC converters, load switching, battery management, and power control circuits.
DMN2029USD-13

Description: The DMN2029USD-13 is a dual N-channel enhancement-mode power MOSFET designed for high-effi ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ATMEGA328P-AU / AVR AVR® ATmega Microcontroller IC 8-Bit 20MHz 32KB (16K x 16) FLASH 32-TQFP (7x7)
ATMEGA328P-AU

Description: AVR AVR® ATmega Microcontroller IC 8-Bit 20MHz 32KB (16K x 16) FLASH 32-TQFP (7x7) ...
Package: T&R | MOQ: 2000 | MPQ: 2000

AT24C512C-SSHD-B / The AT24C512C-SSHD-B is a 512Kbit non-volatile serial EEPROM organized as 65,536 x 8 bits, featuring a 2-wire I2C-compatible interface with clock frequency up to 1 MHz. It operates over a supply voltage range of 2.5V to 5.5V and provides fast access time of approximately 550 ns with a maximum write cycle time of 5 ms. The device supports 128-byte page write operations and allows up to eight devices on the same I2C bus using address pins. It offers high endurance of up to 1 million write cycles and data retention up to 100 years, with low standby current in the microampere range. The IC includes hardware write-protect functionality and operates over a temperature range of -40°C to +85°C. Packaged in SOIC-8, it is suitable for industrial control, embedded systems, configuration storage, and data logging applications.
AT24C512C-SSHD-B

Description: The AT24C512C-SSHD-B is a 512Kbit non-volatile serial EEPROM organized as 65,536 x 8 bits, ...
Package: TUBE | MOQ: 1000 | MPQ: 100

AT24C32D-SSHM-T / The AT24C32D-SSHM-T is a 32Kbit non-volatile EEPROM memory organized as 4096 x 8 bits, featuring a standard I2C-compatible 2-wire serial interface with clock frequency up to 1 MHz. It operates over a wide supply voltage range of 1.7V to 5.5V and provides a fast access time of approximately 550 ns with a typical write cycle time of 5 ms. The device supports page write operations, low standby current in the microampere range, and high endurance of up to 1 million write cycles with data retention exceeding 100 years. It includes hardware write protection and supports multiple device addressing on the same bus. Operating temperature range is -40°C to +85°C, and the SOIC-8 package enables compact surface-mount integration, making it suitable for data logging, configuration storage, industrial control, and embedded system applications.
AT24C32D-SSHM-T

Description: The AT24C32D-SSHM-T is a 32Kbit non-volatile EEPROM memory organized as 4096 x 8 bits, fea ...
Package: T&R | MOQ: 4000 | MPQ: 4000

AMC1200BDWVR / The AMC1200BDWVR is a precision isolation amplifier designed for current sensing and voltage measurement in high-voltage environments, featuring galvanic isolation up to 4250 Vpeak. It operates with a differential input voltage range of ±250 mV optimized for shunt resistor applications and provides a fixed gain of 8 with ±0.5% accuracy. The device supports a bandwidth of approximately 100 kHz and offers high common-mode rejection ratio of about 108 dB, ensuring accurate signal transmission in noisy environments. It operates with supply voltages of 2.7V to 5.5V and consumes typical supply current around 5.4 mA. The amplifier features low offset voltage (~200 µV), low nonlinearity (0.075% max), and high transient immunity of at least 10 kV/µs. Operating temperature range is -40°C to +105°C, and the wide-body SOIC-8 package ensures reinforced isolation spacing, making it suitable for motor control, power inverters, and industrial current sensing applications.
AMC1200BDWVR

Description: The AMC1200BDWVR is a precision isolation amplifier designed for current sensing and volta ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ALF1P05 / The ALF1P05 is a general-purpose power relay featuring a single-pole single-throw normally open (SPST-NO, 1 Form A) contact configuration, designed for high-current switching applications. It operates with a 5V DC coil voltage, drawing approximately 180 mA with a coil resistance of 27.8 Ω and coil power around 900 mW. The relay supports a contact rating of 20 A at 250 VAC with a maximum switching current up to 25 A and switching power up to 6250 VA . It offers low contact resistance (≤100 mΩ), high insulation resistance (≥1000 MΩ), and dielectric strength up to 5000 Vrms between coil and contacts. Typical operate and release times are 20 ms and 15 ms respectively. Designed for operation in -40°C to +60°C environments, it is ideal for compressors, inverters, and home appliance applications such as air conditioners and refrigerators .
ALF1P05

Description: The ALF1P05 is a general-purpose power relay featuring a single-pole single-throw normally ...
Package: TRAY | MOQ: 2000 | MPQ: 50

AIAP-01-390K-T / The AIAP-01-390K-T is a wirewound fixed inductor designed for general-purpose power applications, offering an inductance of 39µH with a tolerance of ±10%. It supports a maximum rated current of 880 mA and features a low DC resistance of approximately 260 mΩ, ensuring efficient current handling and reduced power loss. The inductor has a self-resonant frequency of around 7.1 MHz and operates over a wide temperature range of -40°C to +105°C. It is constructed as an unshielded axial through-hole component, providing stable inductance characteristics and mechanical robustness. The compact form factor (approximately 9.14 mm length, 3.3 mm diameter) makes it suitable for power filtering, energy storage, and DC-DC converter applications.
AIAP-01-390K-T

Description: The AIAP-01-390K-T is a wirewound fixed inductor designed for general-purpose power applic ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ADXL335BCPZ / The ADXL335BCPZ is a small, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs, designed to measure acceleration in the ±3 g range. It operates over a supply voltage range of 1.8V to 3.6V and features low current consumption of approximately 350 µA. The device provides ratiometric analog outputs for X, Y, and Z axes, with sensitivity typically around 300 mV/g and bandwidth configurable from 0.5 Hz up to 1600 Hz (X/Y) and 550 Hz (Z) using external capacitors. It offers low noise performance (~150 µg/√Hz), high shock survivability (up to 10,000 g), and fast response time. The sensor operates over a temperature range of -40°C to +85°C and is housed in a compact 4x4 mm LFCSP-16 package, making it ideal for motion detection, tilt sensing, vibration monitoring, and portable device applications.
ADXL335BCPZ

Description: The ADXL335BCPZ is a small, low power, complete 3-axis accelerometer with signal condition ...
Package: TRAY | MOQ: 302 | MPQ: 151

ADUM1201ARZ / The ADUM1201ARZ is a dual-channel digital isolator based on iCoupler® technology, providing galvanic isolation up to 2500 Vrms between input and output. It supports data rates up to 25 Mbps and operates over a supply voltage range of 2.7V to 5.5V on both sides, enabling flexible interfacing. The device features low propagation delay of approximately 45 ns, low pulse width distortion (<5 ns), and high common-mode transient immunity exceeding 25 kV/µs. Typical supply current is around 1.5 mA per channel at 1 Mbps. It includes two independent channels with configurable direction (1 forward, 1 reverse), and operates over a temperature range of -40°C to +105°C. The SOIC-8 package ensures compact integration, making it suitable for industrial communication, SPI/I2C isolation, and data interface protection applications.
ADUM1201ARZ

Description: The ADUM1201ARZ is a dual-channel digital isolator based on iCoupler® technology, providi ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADS8325IDGKT / The ADS8325IDGKT is a high-speed 16-bit successive approximation register (SAR) analog-to-digital converter designed for precision data acquisition systems. It operates over a supply voltage range of 2.7V to 5.5V and supports a maximum sampling rate of 100 kSPS with a single input channel. The device features differential or pseudo-differential input configuration and uses an external reference voltage up to VDD, enabling flexible signal scaling. It provides a SPI/SSI-compatible serial interface and achieves excellent linearity of ±1.5 LSB typical with very low noise (~3 LSB p-p). Power consumption is approximately 4.5 mW at full speed and less than 1 mW at 10 kSPS, making it suitable for low-power applications. Operating temperature range is -40°C to +85°C, and the compact VSSOP-8 package allows efficient PCB integration in portable instrumentation, remote sensing, and industrial data acquisition systems.
ADS8325IDGKT

Description: The ADS8325IDGKT is a high-speed 16-bit successive approximation register (SAR) analog-to- ...
Package: T&R | MOQ: 250 | MPQ: 250

ADS8321E/250 / The ADS8321E/250 is a 16-bit successive approximation register (SAR) analog-to-digital converter designed for high-speed and low-power data acquisition applications. It operates with a single supply voltage of 4.75V to 5.25V and supports a maximum sampling rate of 100 kSPS. The device features differential, pseudo-differential, and single-ended input configurations with an external reference voltage range from 0.5V to VCC/2. It provides a SPI/SSI-compatible serial interface for data output and achieves low power consumption of approximately 4.5 mW at full speed and less than 1 mW at 10 kSPS, with standby current as low as 3 µA. The ADC offers high precision with low noise and excellent linearity, operating over a temperature range of -40°C to +85°C, and is housed in a compact VSSOP-8 package suitable for portable instrumentation, industrial control, and remote data acquisition systems.
ADS8321E/250

Description: The ADS8321E/250 is a 16-bit successive approximation register (SAR) analog-to-digital con ...
Package: T&R | MOQ: 250 | MPQ: 250

ADS1281IPWR / The ADS1281IPWR is a high-performance 24-bit delta-sigma analog-to-digital converter optimized for high-resolution and low-noise measurement applications. It operates with a supply voltage range of 2.7V to 5.25V for analog supply and 1.65V to 3.6V for digital supply, supporting flexible system integration. The device features a programmable data rate up to 4 kSPS with exceptional noise performance (as low as 17 nV/√Hz input-referred noise) and dynamic range up to 130 dB. It supports differential input signals with programmable gain amplifier (PGA) up to 64, allowing precise amplification of low-level signals. The ADC includes a SPI-compatible serial interface, onboard digital filtering, and internal reference options. Typical power consumption is around 5 mW. Operating temperature range is -40°C to +85°C, and the TSSOP-28 package enables compact and reliable PCB implementation for seismic, industrial sensing, and precision data acquisition systems.
ADS1281IPWR

Description: The ADS1281IPWR is a high-performance 24-bit delta-sigma analog-to-digital converter opti ...
Package: t&r | MOQ: 2000 | MPQ: 2000

ADS1251U / The ADS1251U is a high-resolution 24-bit delta-sigma analog-to-digital converter designed for precision measurement applications. It operates with a supply voltage of 5V and supports a differential analog input range of ±2.5V, delivering low noise and high accuracy performance. The device provides a programmable output data rate up to 20 kSPS with excellent linearity and low total harmonic distortion. It features low input-referred noise (typically <1 µV RMS), high signal-to-noise ratio (>100 dB), and integral nonlinearity of ±0.0015% typical. The ADC uses a simple serial interface for data output and requires minimal external components. Operating temperature range is -40°C to +85°C, and the SOIC-8 package enables compact integration in industrial instrumentation, weigh scales, and sensor signal acquisition systems.
ADS1251U

Description: The ADS1251U is a high-resolution 24-bit delta-sigma analog-to-digital converter designed ...
Package: TUBE | MOQ: 450 | MPQ: 75

ADM3251EARWZ-REEL / The ADM3251EARWZ-REEL is a fully integrated isolated RS-232 transceiver featuring iCoupler® and isoPower® technology, providing both signal and power isolation up to 2500 Vrms. It supports data rates up to 460 kbps and operates from a single supply voltage range of 4.5V to 5.5V, eliminating the need for an external isolated DC-DC converter. The device integrates one driver and one receiver (1Tx/1Rx) with high common-mode transient immunity (>25 kV/µs) and propagation delay of approximately 135–190 ns. It offers robust ESD protection up to ±15 kV air discharge and ±8 kV contact discharge. Typical supply current is around 110 mA. Operating temperature range is -40°C to +85°C, and the wide-body SOIC-20 package ensures adequate creepage and clearance distances, making it ideal for industrial communication, medical equipment, and isolated RS-232 interface applications.
ADM3251EARWZ-REEL

Description: The ADM3251EARWZ-REEL is a fully integrated isolated RS-232 transceiver featuring iCoupler ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADM2687EBRIZ / The ADM2687EBRIZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver utilizing iCoupler® and isoPower® technology, providing galvanic isolation up to 5000 Vrms and eliminating the need for an external isolated power supply. It operates from a single 3.3V or 5V supply and supports data rates up to 500 kbps, with typical propagation delay around 200–700 ns. The device features high common-mode transient immunity of at least 25 kV/µs and robust ±15 kV ESD protection, ensuring reliable operation in harsh industrial environments. It integrates one differential driver and one receiver with half-duplex communication capability, and includes built-in protections such as current limiting and thermal shutdown. Typical supply current is around 55 mA, and the device operates over a temperature range of -40°C to +85°C. The wide-body SOIC-16 package provides reinforced insulation spacing, making it suitable for industrial automation, fieldbus networks, and isolated communication systems.
ADM2687EBRIZ

Description: The ADM2687EBRIZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver ...
Package: T&R | MOQ: 400 | MPQ: 400

ADM2483BRWZ-REEL / The ADM2483BRWZ-REEL is a half-duplex isolated RS-485/RS-422 transceiver integrating iCoupler® magnetic isolation technology, providing galvanic isolation up to 2500 Vrms. It supports data rates up to 500 kbps and operates with supply voltages from 2.7V to 5.5V on the logic side and 5V on the bus side. The device features high common-mode transient immunity greater than 25 kV/µs, low operating current of approximately 2.5 mA, and propagation delay around 600–620 ns. It includes one driver and one receiver with bidirectional communication capability and supports up to 256 nodes on the bus. The transceiver offers fail-safe receiver inputs, slew-rate limited outputs for reduced EMI, and thermal shutdown protection. Operating temperature range is -40°C to +85°C, and the wide-body SOIC-16 package ensures compliance with isolation spacing requirements, making it suitable for industrial automation, fieldbus systems, and isolated communication interfaces.
ADM2483BRWZ-REEL

Description: The ADM2483BRWZ-REEL is a half-duplex isolated RS-485/RS-422 transceiver integrating iCoup ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADM2481BRWZ-RL7 / The ADM2481BRWZ-RL7 is a half-duplex isolated RS-485/RS-422 transceiver utilizing iCoupler® magnetic isolation technology, providing galvanic isolation up to 2500 Vrms. It supports data rates up to 500 kbps and operates with supply voltages from 3.0V to 5.5V on the logic side and typically 5V on the bus side. The device integrates one driver and one receiver with differential I/O, featuring slew-rate limited outputs to reduce EMI and reflections. It offers high common-mode transient immunity of at least 25 kV/µs and input impedance around 96 kΩ, allowing up to 256 nodes on the bus. The transceiver includes fail-safe receiver operation, low propagation delay (~250 ns), and ESD protection (±2 kV HBM). Operating temperature range is -40°C to +85°C, and the wide-body SOIC-16 package ensures compliance with isolation spacing requirements, making it suitable for industrial communication, building automation, and isolated fieldbus systems.
ADM2481BRWZ-RL7

Description: The ADM2481BRWZ-RL7 is a half-duplex isolated RS-485/RS-422 transceiver utilizing iCoupler ...
Package: T&R | MOQ: 400 | MPQ: 400

ADM101EARMZ-REEL7 / Craft Port Tiny RS-232 Transceiver for Portable Applications 460 kbit/s Transmission Rate, Single 5 V Power Supply, Compatible with RS-232, Input/Output Levels, 0.1 μF Charge Pump Capacitors, One Driver and One Receiver, On-Board DC-DC Converter, ±4.2 V Output Swing with 5 V Supply, Low Power BiCMOS: 500 μA I CC, Ultralow Power (1 μA) Shutdown Mode
ADM101EARMZ-REEL7

Description: Craft Port Tiny RS-232 Transceiver for Portable Applications 460 kbit/s Transmission Rate, ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD8608ARZ-REEL7 / The AD8608ARZ-REEL7 is a quad precision CMOS operational amplifier featuring rail-to-rail input and output capability, optimized for low noise and high accuracy applications. It operates over a supply voltage range of 2.7V to 5.5V and provides a gain bandwidth product of 10 MHz with a slew rate of 5 V/µs. The device offers ultra-low input bias current of approximately 1 pA and low input offset voltage typically around 20–80 µV, ensuring high precision signal amplification. It delivers output current up to 80 mA per channel and features low noise density of about 8 nV/√Hz with high CMRR (~100 dB). The amplifier consumes approximately 1 mA per channel (≈4.8 mA total) and operates over a temperature range of -40°C to +125°C. Designed using DigiTrim® technology, it ensures excellent DC accuracy and stability, making it suitable for sensor interfaces, instrumentation, photodiode amplification, and low-noise signal conditioning applications.
AD8608ARZ-REEL7

Description: The AD8608ARZ-REEL7 is a quad precision CMOS operational amplifier featuring rail-to-rail ...
Package: T&R | MOQ: 1000 | MPQ: 1000

JN5169/001Z / The JN5169/001Z is a highly integrated ultra-low power 32-bit RISC wireless microcontroller with an embedded IEEE 802.15.4 compliant 2.4 GHz RF transceiver, designed for Zigbee and IoT applications. It operates over a supply voltage range of 2.0V to 3.6V and supports a maximum CPU clock frequency of 32 MHz. The device integrates 512 KB Flash, 32 KB RAM, and 4 KB EEPROM, enabling complex wireless applications with OTA update capability. It provides RF output power up to +10 dBm, receiver sensitivity of approximately -96.5 dBm, and data rates up to 400 kbps. Typical current consumption is 13–15 mA in receive mode and 14–23 mA in transmit mode. The MCU includes multiple peripherals such as I2C, SPI, UART, JTAG, 10-bit ADC, PWM, and up to 20 GPIOs. Operating temperature range is -40°C to +125°C, and the compact HVQFN-40 package makes it suitable for low-power wireless networks, smart home systems, industrial IoT, and Zigbee-based communication devices.
JN5169/001Z

Description: The JN5169/001Z is a highly integrated ultra-low power 32-bit RISC wireless microcontrolle ...
Package: T&R | MOQ: 1000 | MPQ: 1000

LNK364DN-TL / The LNK364DN-TL is a highly integrated off-line switcher IC from the LinkSwitch-XT family, designed for low-power AC-DC conversion applications. It integrates a 700V power MOSFET, oscillator, ON/OFF control circuitry, and protection features in a single device, enabling compact flyback power supply designs. The device operates over a universal input range of 85VAC to 265VAC and delivers output power up to approximately 6W (85–265VAC) or 9W (230VAC). It features a switching frequency of around 132 kHz, maximum duty cycle of 60%, and output current capability of approximately 330 mA. The IC includes built-in protections such as current limiting, thermal shutdown, short-circuit protection, and auto-restart functionality. With low standby power consumption (<300 mW) and high efficiency, it is ideal for chargers, adapters, and small appliance power supplies. The SO-8C package allows compact PCB layout and efficient thermal performance for cost-sensitive and energy-efficient designs.
LNK364DN-TL

Description: The LNK364DN-TL is a highly integrated off-line switcher IC from the LinkSwitch-XT family, ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LNK364PN / Energy Efficient, Low Power Off-Line Switcher IC Converter Offline Flyback Topology 132kHz 8-PDIP-B Isolated
LNK364PN

Description: Energy Efficient, Low Power Off-Line Switcher IC Converter Offline Flyback Topology 132kHz ...
Package: TUBE | MOQ: 500 | MPQ: 50

AD8223ARZ / The AD8223ARZ is a low-power, rail-to-rail instrumentation amplifier designed for precision signal conditioning in low-voltage systems. It operates over a wide supply voltage range from 2.2V to 36V (single supply) and consumes very low quiescent current of approximately 60 µA, making it suitable for battery-powered applications. The device offers gain programmable from 1 to 1000 using a single external resistor, with input offset voltage typically around 25 µV and offset drift of 0.3 µV/°C. It provides high common-mode rejection ratio (CMRR) up to 100 dB, low input bias current (~2 nA), and rail-to-rail output swing. The amplifier has a bandwidth of approximately 1 MHz at unity gain and a slew rate of 0.8 V/µs. Operating temperature range is -40°C to +125°C, and the SOIC-8 package makes it suitable for sensor interfaces, medical instrumentation, and portable measurement systems.
AD8223ARZ

Description: The AD8223ARZ is a low-power, rail-to-rail instrumentation amplifier designed for precisio ...
Package: TUBE | MOQ: 392 | MPQ: 98

AD8022ARZ / The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise.
AD8022ARZ

Description: The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplif ...
Package: TUBE | MOQ: 392 | MPQ: 98

AD7791BRMZ / The AD7791BRMZ is a low-power, high-resolution 24-bit sigma-delta analog-to-digital converter designed for precision measurement applications. It operates over a supply voltage range of 2.7V to 5.25V and integrates a programmable gain amplifier (PGA) with selectable gains up to 128, allowing accurate measurement of low-level signals. The device supports output data rates up to 120 Hz with effective resolution up to 23 bits and input-referred noise as low as 40 nV RMS. It features differential input channels, a SPI-compatible serial interface, and low power consumption of approximately 380 µA in active mode and less than 1 µA in standby mode. The ADC offers excellent linearity with ±0.0015% typical INL and includes internal clocking and digital filtering. Operating temperature range is -40°C to +105°C, and the compact MSOP-10 package makes it suitable for weigh scales, pressure measurement, industrial instrumentation, and sensor interface applications.
AD7791BRMZ

Description: The AD7791BRMZ is a low-power, high-resolution 24-bit sigma-delta analog-to-digital conver ...
Package: T&R | MOQ: 2500 | MPQ: 2500

AD736JRZ-R7 / The AD736JRZ-R7 is a low-power, precision true RMS-to-DC converter designed to accurately convert AC signals into proportional DC output. It operates over a wide supply voltage range from +2.8V, −3.2V up to ±16.5V and consumes low supply current typically around 160–200 µA . The device supports a full-scale input range of approximately 200 mV RMS (expandable with external attenuators) and offers high input impedance up to 10¹² Ω with very low input bias current (~25 pA) . It provides high accuracy with error as low as ±0.3 mV ±0.3% of reading and maintains performance across various waveform types including distorted or non-sinusoidal signals . The converter features bandwidth exceeding 10 kHz for 1% error and supports crest factors up to 5. With an internal output buffer, low power consumption (~1 mW), and operating temperature range up to industrial grades, it is ideal for precision measurement, instrumentation, multimeters, and signal processing applications.
AD736JRZ-R7

Description: The AD736JRZ-R7 is a low-power, precision true RMS-to-DC converter designed to accurately ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD621ARZ-R7 / The AD621ARZ-R7 is a low-cost, low-power instrumentation amplifier designed for high-accuracy signal conditioning with gain programmable via external resistor or pin-strapping (G = 10 or 100). It operates over a wide supply voltage range of ±2.3V to ±18V (4.6V to 36V single supply) and consumes low supply current of approximately 900 µA to 1.3 mA. The device features low input offset voltage around 35–75 µV, input bias current of about 500 pA, and high common-mode rejection ratio (CMRR) up to 110–130 dB, ensuring accurate amplification of small differential signals. It provides a bandwidth of approximately 800 kHz at gain of 10 and slew rate of 1.2 V/µs, with output current capability up to 18 mA per channel . The amplifier also offers low noise performance (~9 nV/√Hz) and high input impedance (~10 GΩ), making it suitable for precision applications such as strain gauges, medical instrumentation, and industrial data acquisition systems.
AD621ARZ-R7

Description: The AD621ARZ-R7 is a low-cost, low-power instrumentation amplifier designed for high-accur ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD620ARZ-REEL7 / The AD620ARZ-REEL7 is a low-cost, high-accuracy instrumentation amplifier designed for precision signal conditioning applications, offering gain programmable from 1 to 10,000 using a single external resistor. It operates over a wide supply voltage range of ±2.3V to ±18V (4.6V to 36V single supply) and features low supply current of approximately 900 µA to 1.3 mA, making it suitable for low-power systems. The device provides excellent performance with input offset voltage as low as 30–50 µV, offset drift around 0.6 µV/°C, and high common-mode rejection ratio (CMRR) up to 130–140 dB. It has a bandwidth of approximately 1 MHz at unity gain and a slew rate of 1.2 V/µs, with very low input bias current (~500 pA to 1 nA) . The amplifier offers low noise density (~9 nV/√Hz) and high input impedance (~10 GΩ), ensuring accurate amplification of small differential signals. Operating temperature range is -40°C to +85°C, and the SOIC-8 package enables compact PCB design, making it ideal for medical instrumentation, data acquisition systems, sensor interfaces, and industrial measurement applications.
AD620ARZ-REEL7

Description: The AD620ARZ-REEL7 is a low-cost, high-accuracy instrumentation amplifier designed for pre ...
Package: T&R | MOQ: 750 | MPQ: 750

AD5200BRM10 / The AD5200BRM10 is a 256-position digital potentiometer with a nominal resistance of 10 kΩ, controlled via a 3-wire SPI-compatible serial interface. It operates over a supply voltage range of 2.7V to 5.5V (or ±2.7V dual supply) and provides linear resistance adjustment with 8-bit resolution. The device features low supply current typically around 15–40 µA and very low power dissipation (~0.2 mW). It has a typical wiper resistance of 50–100 Ω and supports bandwidth up to approximately 600 kHz (for 10 kΩ configuration). The temperature coefficient is around 500 ppm/°C, and it offers monotonic behavior with ±1 LSB DNL and ±2 LSB INL. Operating temperature range is -40°C to +85°C. The compact MSOP-10 package enables space-efficient design, making it suitable for programmable gain control, offset adjustment, filter tuning, and general-purpose analog signal conditioning applications.
AD5200BRM10

Description: The AD5200BRM10 is a 256-position digital potentiometer with a nominal resistance of 10 kÎ ...
Package: TUBE | MOQ: 250 | MPQ: 50

ACPL-C87B-000E / The ACPL-C87B-000E is a precision optically isolated voltage sensor and isolation amplifier designed for accurate voltage measurement in high-noise environments. It operates over a supply voltage range of 3V to 5.5V and features a differential output with a bandwidth of approximately 100 kHz. The device supports an input voltage range of 0 to 2V with very high input impedance (~1 GΩ), enabling precise scaled voltage sensing. It offers high gain accuracy of ±0.5%, low non-linearity (0.1% max), and low input offset voltage (~300 µV typical), with input bias current around 1.5 nA . The isolation rating reaches up to 5000 Vrms with common-mode transient immunity of 15 kV/µs, ensuring robust performance in industrial environments . Typical supply current is about 10.5 mA, and the device operates over a temperature range of -40°C to +105°C . Packaged in a stretched SOIC-8 form factor, it is widely used in motor drives, renewable energy systems, and isolated data acquisition applications.
ACPL-C87B-000E

Description: The ACPL-C87B-000E is a precision optically isolated voltage sensor and isolation amplifie ...
Package: TUBE | MOQ: 320 | MPQ: 80

A3977SLPTR-T / The A3977SLPTR-T is a microstepping stepper motor driver IC integrating dual full-bridge DMOS outputs designed for bipolar stepper motor control. It operates over a supply voltage range of 3.0V to 5.5V for logic and up to 35V for motor supply, with output current capability up to ±2.5A per phase. The device supports multiple step modes including full-step, half-step, quarter-step, and sixteenth-step resolution, enabling smooth and precise motor control. It features fixed off-time PWM current regulation, adjustable current limit via external resistor, and built-in protection functions such as overcurrent protection, thermal shutdown, and undervoltage lockout. Typical switching frequency is around 30–50 kHz, and the device provides low RDS(on) outputs for efficient operation. Operating temperature range is -20°C to +85°C, and the exposed pad TSSOP-28 package ensures efficient heat dissipation, making it suitable for printers, CNC systems, robotics, and precision motion control applications.
A3977SLPTR-T

Description: The A3977SLPTR-T is a microstepping stepper motor driver IC integrating dual full-bridge D ...
Package: T&R | MOQ: 4000 | MPQ: 4000

AT070TN83 V.1 / The AT070TN83 V.1 is a 7.0-inch TFT LCD display module featuring a resolution of 800 x 480 (WVGA) with a 24-bit RGB interface, designed for embedded display applications. It operates with a supply voltage of 3.3V logic and typically 9–12V for the LED backlight, providing brightness around 200–250 cd/m² and contrast ratio of approximately 500:1. The display supports a viewing angle of 70° (typical) in all directions and has a pixel pitch of 0.1926 x 0.1790 mm. It features a response time of about 10–15 ms and uses LED backlighting for low power consumption and long lifespan. The module includes an RGB TTL interface with HSYNC, VSYNC, and DOTCLK signals, and operates over a temperature range of -20°C to +70°C. The compact integrated module design makes it suitable for industrial control panels, HMI systems, automotive displays, and embedded multimedia applications.
AT070TN83 V.1

Description: The AT070TN83 V.1 is a 7.0-inch TFT LCD display module featuring a resolution of 800 x 480 ...
Package: TRAY | MOQ: 500 | MPQ: 40

L78L33ABUTR / The L78L33ABUTR is a fixed-output linear voltage regulator providing a stable 3.3V output with output current capability up to 100 mA. It operates with an input voltage range from approximately 5.3V to 30V and features a typical dropout voltage of around 2V. The device offers output voltage tolerance of ±4%, typical quiescent current around 5.5–6 mA, and power supply rejection ratio (PSRR) of approximately 49 dB. It includes built-in protection features such as current limiting, thermal shutdown, and short-circuit protection, ensuring reliable operation in demanding conditions. The regulator operates over a wide temperature range of -40°C to +125°C and is housed in a compact SOT-89-3 package, making it suitable for embedded systems, local voltage regulation, and general-purpose power supply applications.
L78L33ABUTR

Description: The L78L33ABUTR is a fixed-output linear voltage regulator providing a stable 3.3V output ...
Package: T&R | MOQ: 2500 | MPQ: 2500

L78L12ACZ-TR / The L78L12ACZ-TR is a fixed-output linear voltage regulator providing a stable 12V output with output current capability up to 100 mA. It operates with an input voltage up to 35V and requires a typical input range of approximately 14.5V to 27V for proper regulation. The device features output voltage accuracy of ±4%, typical quiescent current around 6 mA, and power supply rejection ratio (PSRR) of about 42 dB. It includes built-in protection features such as current limiting, thermal shutdown, and short-circuit protection, ensuring reliable operation. The typical dropout voltage is approximately 1.7V, and it operates over a temperature range of 0°C to +125°C. Packaged in a TO-92-3 through-hole form factor, it is suitable for general-purpose power regulation, local voltage regulation, and embedded system power supply designs.
L78L12ACZ-TR

Description: The L78L12ACZ-TR is a fixed-output linear voltage regulator providing a stable 12V output ...
Package: T&R | MOQ: 2000 | MPQ: 2000

AS78L05RTR-G1 / The AS78L05RTR-G1 is a fixed-output linear voltage regulator designed to provide a stable 5V output with output current capability up to 100 mA. It operates over an input voltage range up to 30V and features a typical dropout voltage of approximately 1.8V at full load. The device offers output voltage tolerance of ±5% and typical quiescent current around 5.5 mA. It includes built-in protection features such as over-temperature shutdown, short-circuit protection, and safe operating area compensation, ensuring reliable operation in various conditions. The regulator provides power dissipation up to approximately 750 mW and operates across a temperature range of -40°C to +125°C. Packaged in a compact SOT-89-3 form factor, it is suitable for local voltage regulation, embedded systems, and general-purpose power management applications.
AS78L05RTR-G1

Description: The AS78L05RTR-G1 is a fixed-output linear voltage regulator designed to provide a stable ...
Package: T&R | MOQ: 1000 | MPQ: 1000

NCP7805TG / The NCP7805TG is a fixed-output linear voltage regulator providing a stable 5V output with output current capability up to 1A. It operates with an input voltage range up to 35V and features typical dropout voltage around 2V at full load. The device offers output voltage accuracy of ±2% and includes internal current limiting, thermal shutdown, and safe operating area protection for reliable operation. It has a typical quiescent current of approximately 5 mA and requires minimal external components for operation. Operating over a temperature range of -40°C to +125°C, the TO-220 package provides excellent thermal performance, making it suitable for power supplies, industrial electronics, and embedded systems requiring regulated 5V output.
NCP7805TG

Description: The NCP7805TG is a fixed-output linear voltage regulator providing a stable 5V output with ...
Package: TUBE | MOQ: 1000 | MPQ: 50

74LCX04MTCX / The 74LCX04MTCX is a high-performance low-voltage CMOS hex inverter designed for high-speed digital applications with low power consumption. It operates over a supply voltage range of 2.0V to 3.6V and is 5V tolerant at the inputs and outputs, allowing flexible interfacing with mixed-voltage systems. The device features fast propagation delay typically around 3.5 ns at 3.3V and supports high output drive capability up to ±24 mA. It offers low quiescent current (<10 µA), low input leakage (<1 µA), and high noise immunity. Operating temperature range is -40°C to +85°C, and the TSSOP-14 package provides a compact solution for high-density PCB designs in digital logic, buffering, and signal inversion applications.
74LCX04MTCX

Description: The 74LCX04MTCX is a high-performance low-voltage CMOS hex inverter designed for high-spee ...
Package: T&R | MOQ: 2500 | MPQ: 2500

74HCT595D,112 / The 74HCT595D,112 is a high-speed CMOS 8-bit serial-in, parallel-out shift register with TTL-compatible inputs and an integrated storage register with 3-state outputs, designed for data expansion and output control applications. It operates over a supply voltage range of 4.5V to 5.5V and features low power consumption with typical quiescent current in the microampere range. The device supports clock frequencies up to approximately 25 MHz at 5V and provides output drive capability up to ±6 mA. It includes shift register clock (SHCP), storage register clock (STCP), serial data input (DS), output enable (OE), and master reset (MR) inputs. Typical propagation delay is around 15–25 ns, with low input leakage current (<1 µA) and high noise immunity. Operating temperature range is -40°C to +125°C, and the SOIC-16 package is suitable for LED driving, data latching, and digital interface applications.
74HCT595D,112

Description: The 74HCT595D,112 is a high-speed CMOS 8-bit serial-in, parallel-out shift register with T ...
Package: T&R | MOQ: 2500 | MPQ: 2500

74HCT4094D,118 / The 74HCT4094D,118 is a high-speed CMOS 8-stage shift-and-store register with TTL-compatible inputs and 3-state outputs, designed for serial-to-parallel data conversion and output expansion. It operates over a supply voltage range of 4.5V to 5.5V and features low power consumption with typical quiescent current in the microampere range. The device supports clock frequencies up to approximately 25 MHz at 5V and provides output drive capability up to ±6 mA. It includes a serial data input, shift register clock, storage register clock (strobe), output enable (OE), and serial output for cascading multiple devices. Typical propagation delay is around 15–25 ns, with low input leakage current (<1 µA) and high noise immunity. Operating temperature range is -40°C to +125°C, and the SOIC-16 package is suitable for LED driving, data latching, and digital interface applications.
74HCT4094D,118

Description: The 74HCT4094D,118 is a high-speed CMOS 8-stage shift-and-store register with TTL-compatib ...
Package: T&R | MOQ: 2500 | MPQ: 2500

74HCT32D,653 / The 74HCT32D,653 is a high-speed CMOS logic device implementing four independent 2-input OR gates with TTL-compatible input levels. It operates over a supply voltage range of 4.5V to 5.5V and features low power consumption with typical static current in the microampere range. The device provides fast propagation delay typically around 8 ns and balanced rise/fall times for reliable high-speed digital operation. Input high voltage is compatible with TTL levels (~2.0V), while output drive capability supports standard CMOS loads. It operates over a temperature range of -40°C to +125°C and includes ESD protection exceeding 2 kV. Packaged in SOIC-14, it is suitable for digital logic circuits, signal processing, and embedded system designs.
74HCT32D,653

Description: The 74HCT32D,653 is a high-speed CMOS logic device implementing four independent 2-input O ...
Package: T&R | MOQ: 2500 | MPQ: 2500

74HCT240D,653 / The 74HCT240D,653 is a high-speed CMOS octal inverting buffer/line driver featuring two groups of four buffers with separate output enable controls, providing 3-state outputs for bus-oriented applications. It operates over a supply voltage range of 4.5V to 5.5V and is TTL-compatible at the inputs, allowing direct interfacing with TTL logic levels. The device offers low power consumption with typical quiescent current in the microampere range and fast propagation delays typically around 8–12 ns. It provides strong output drive capability with output currents up to ±6 mA, making it suitable for driving bus lines and capacitive loads. Operating over a temperature range of -40°C to +125°C and housed in a SOIC-20 package, it is ideal for data buffering, memory addressing, and digital system interfacing applications.
74HCT240D,653

Description: The 74HCT240D,653 is a high-speed CMOS octal inverting buffer/line driver featuring two gr ...
Package: T&R | MOQ: 2000 | MPQ: 2000

74HCT151D,653 / The 74HCT151D,653 is a high-speed CMOS 8-to-1 data selector/multiplexer with TTL-compatible inputs, designed to route one of eight data inputs to a single output based on a 3-bit select input. It operates over a supply voltage range of 4.5V to 5.5V and features low power consumption with typical static current in the microampere range. The device provides both true and complementary outputs, with typical propagation delay around 8–12 ns, enabling fast switching performance in digital systems. It includes an active-low enable input for easy cascading and control. With an operating temperature range of -40°C to +125°C and packaged in SOIC-16, it is suitable for data routing, signal selection, and logic control applications in embedded and digital designs.
74HCT151D,653

Description: The 74HCT151D,653 is a high-speed CMOS 8-to-1 data selector/multiplexer with TTL-compatibl ...
Package: T&R | MOQ: 2500 | MPQ: 2500

SN74HCT14DR / The SN74HCT14DR is a high-speed CMOS logic device containing six independent inverters with Schmitt-trigger inputs, designed to provide improved noise immunity and signal conditioning for slow or noisy input signals. It operates over a supply voltage range of 4.5V to 5.5V and features TTL-compatible input thresholds. The device offers typical propagation delay of 8–12 ns and low power consumption with quiescent current in the microampere range. The Schmitt-trigger action provides well-defined switching thresholds with hysteresis typically around 0.8V, ensuring clean digital transitions. It supports output drive currents up to ±4 mA and operates over a temperature range of -40°C to +125°C. Packaged in SOIC-14, it is suitable for waveform shaping, signal conditioning, and digital logic interfacing applications.
SN74HCT14DR

Description: The SN74HCT14DR is a high-speed CMOS logic device containing six independent inverters wit ...
Package: T&R | MOQ: 2500 | MPQ: 2500













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |