All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

AT90CAN128-16AU / The AT90CAN128-16AU is a high-performance 8-bit AVR microcontroller featuring 128KB of in-system programmable Flash memory, 4KB SRAM, and 4KB EEPROM, designed for embedded applications requiring CAN communication. It operates at a maximum clock frequency of 16 MHz and supports a supply voltage range of 2.7V to 5.5V. The device includes 53 programmable I/O pins and integrates a full CAN 2.0A/B controller with 15 message objects, enabling efficient automotive and industrial network communication. It also provides multiple communication interfaces such as USART, SPI, and I2C (TWI), along with a 10-bit ADC (8 channels), timers/counters (2×8-bit, 2×16-bit), PWM outputs, watchdog timer, and analog comparator. The MCU supports advanced interrupt handling, power-saving modes, and low power consumption with typical active current around a few milliamperes. Operating temperature range is -40°C to +85°C, and the TQFP-64 package enables compact surface-mount integration. It is ideal for automotive systems, industrial control, CAN-based networks, and embedded communication applications.
AT90CAN128-16AU

Description: The AT90CAN128-16AU is a high-performance 8-bit AVR microcontroller featuring 128KB of in- ...
Package: TRAY | MOQ: 720 | MPQ: 90

ATMEGA88PV-10PU / The ATMEGA88PV-10PU is a low-power 8-bit microcontroller based on the AVR enhanced RISC architecture, operating at up to 10 MHz and delivering throughput close to 1 MIPS per MHz. It features 8KB Flash program memory, 1KB SRAM, and 512B EEPROM, providing sufficient memory for embedded applications . The device operates over a wide supply voltage range of 1.8V to 5.5V and includes 23 programmable I/O lines, enabling flexible interfacing . It integrates peripherals such as a 10-bit ADC (6 channels in PDIP package), USART, SPI, I2C (TWI), three timers (2×8-bit, 1×16-bit), PWM channels, watchdog timer, and analog comparator . The MCU supports multiple low-power modes with typical consumption around 0.3 mA at 1 MHz and down to microamp levels in sleep modes . It operates over an industrial temperature range of -40°C to +85°C and comes in a PDIP-28 package suitable for prototyping and through-hole designs. It is widely used in embedded control systems, Arduino-compatible designs, industrial control, and low-power applications.
ATMEGA88PV-10PU

Description: The ATMEGA88PV-10PU is a low-power 8-bit microcontroller based on the AVR enhanced RISC ar ...
Package: TUBE | MOQ: 640 | MPQ: 80

WYO222MCMBRAKR / The WYO222MCMBRAKR is a ceramic disc safety capacitor from Vishay designed for EMI/RFI suppression in AC line applications, compliant with IEC 60384-14 standards. It provides a capacitance of 2.2 nF (2200 pF) with ±20% tolerance and is rated for 440VAC (X1 class) and 250VAC (Y2 class), enabling safe use across line-to-line and line-to-ground filtering circuits . The device uses a Class 2 Y5U dielectric, offering compact size and high capacitance density, with dissipation factor up to approximately 2.5% at 1 kHz and insulation resistance ≥6000 MΩ . It operates over a wide temperature range of -40°C to +125°C and features a radial through-hole package with 5 mm lead spacing and ~9 mm diameter, suitable for robust PCB mounting . The capacitor is designed with flame-retardant epoxy coating (UL94 V-0) and high test voltage capability (up to 2500 VAC), ensuring reliability in harsh environments . It is widely used in power supplies, SMPS, industrial equipment, and mains filtering circuits where safety-certified suppression components are required.
WYO222MCMBRAKR

Description: The WYO222MCMBRAKR is a ceramic disc safety capacitor from Vishay designed for EMI/RFI sup ...
Package: T&R | MOQ: 2000 | MPQ: 2000

VUO125-16NO7 / The VUO125-16NO7 is a high-power three-phase bridge rectifier module designed for industrial AC-DC conversion applications. It features a peak reverse voltage (VRRM) of 1600V and an average rectified current of approximately 150A (up to 166A depending on conditions), enabling high-power operation in demanding systems . The device offers low forward voltage drop typically around 1.07–1.3V, reducing conduction losses and improving efficiency . It supports high surge current capability up to approximately 1.8kA, ensuring robustness under transient conditions . The module includes isolated baseplate construction with isolation voltage around 3000V, enhancing electrical safety . It operates over a wide junction temperature range of -40°C to +150°C and features low reverse leakage current around 200–300 µA . The PWS-C package with screw terminals allows secure mounting and efficient thermal management. This rectifier is widely used in motor drives, industrial power supplies, PWM inverter front-end rectification, and high-power DC supply systems.
VUO125-16NO7

Description: The VUO125-16NO7 is a high-power three-phase bridge rectifier module designed for industri ...
Package: BULK | MOQ: 100 | MPQ: 100

TS4GSDHC4 / The TS4GSDHC4 is a 4GB SDHC (Secure Digital High Capacity) memory card designed for reliable data storage in consumer and embedded devices. It complies with SD 2.0 specifications and operates with a supply voltage range of 2.7V to 3.6V. The card is rated as Class 4, guaranteeing a minimum sustained write speed of 4 MB/s, suitable for standard-definition video recording and general data storage applications . It integrates built-in ECC (Error Correction Code), wear-leveling, and write protection mechanisms to ensure data integrity and long-term reliability . The device supports plug-and-play operation and includes CPRM (Content Protection for Recorded Media) and SDMI compliance features . With standard SD form factor dimensions (32 × 24 × 2.1 mm), it is compatible with cameras, embedded systems, data loggers, and industrial equipment requiring removable storage. It is suitable for applications such as firmware storage, multimedia data handling, and general-purpose memory expansion.
TS4GSDHC4

Description: The TS4GSDHC4 is a 4GB SDHC (Secure Digital High Capacity) memory card designed for reliab ...
Package: TRAY | MOQ: 100 | MPQ: 10

TS4GSDC410M / The TS4GSDC410M is an industrial-grade 4GB SDHC memory card based on high-reliability MLC NAND flash technology, designed for embedded and harsh environment applications. It operates with a supply voltage range of 2.7V to 3.6V and complies with UHS-I interface and SD specification 5.1, supporting high-speed data transfer rates up to approximately 95 MB/s read and 30 MB/s write . The card is rated as Class 10 and Application Performance Class A1, ensuring stable performance for continuous data logging and system boot applications . It features endurance of approximately 3K program/erase cycles, integrated ECC (Error Correction Code), wear-leveling, and bad block management for long-term reliability . The device operates over an extended temperature range of -25°C to +85°C and has low power consumption around 0.4W maximum . With standard SD form factor (24 × 32 × 2.1 mm), it is suitable for industrial automation, transportation systems, IoT devices, embedded Linux systems, and data logging applications requiring durable and stable removable storage.
TS4GSDC410M

Description: The TS4GSDC410M is an industrial-grade 4GB SDHC memory card based on high-reliability MLC ...
Package: TRAY | MOQ: 100 | MPQ: 10

TRS202ECDR / The TRS202ECDR is a dual RS-232 line driver and receiver IC designed to provide a reliable interface between TTL/CMOS logic levels and RS-232 communication ports. It operates from a single 5V supply (4.5V to 5.5V) and integrates two drivers and two receivers with an internal charge pump that generates the required ±9V output levels using external capacitors . The device supports data rates up to 120 kbps and meets TIA/EIA-232-F standards, ensuring compatibility with standard serial communication systems . It provides robust ESD protection up to ±15 kV (HBM) and ±8 kV contact discharge, enhancing reliability in harsh environments . The receiver inputs can tolerate voltages up to ±30V and detect signals as low as ±3V, while typical supply current is around 10–15 mA . Operating temperature range is typically 0°C to +70°C, and the SOIC-16 package supports compact surface-mount designs . It is widely used in industrial communication, embedded systems, laptops, handheld devices, and serial interface applications.
TRS202ECDR

Description: The TRS202ECDR is a dual RS-232 line driver and receiver IC designed to provide a reliable ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TMS320F28069PZT / The TMS320F28069PZT is a high-performance 32-bit microcontroller from the C2000™ real-time control family, based on the C28x DSP core operating at up to 90 MHz and delivering up to 90 MIPS processing performance. It features 256KB Flash memory and 100KB RAM, enabling advanced control algorithms and real-time processing. The device operates with a supply voltage of 3.3V and provides up to 68 GPIO pins for flexible interfacing. It integrates advanced peripherals including multiple high-resolution PWM modules (up to 16 channels), 12-bit ADC with up to 16 channels and sampling rates up to 3.46 MSPS, SPI, I2C, SCI (UART), CAN interface, and DMA controller. The MCU also includes a Control Law Accelerator (CLA) for parallel processing and improved control loop performance. It features low power modes, watchdog timer, and advanced interrupt system. Operating temperature range is -40°C to +105°C, and the LQFP-100 package enables high-density PCB integration. It is ideal for motor control, digital power conversion, renewable energy systems, and industrial automation requiring precise real-time control.
TMS320F28069PZT

Description: The TMS320F28069PZT is a high-performance 32-bit microcontroller from the C2000™ real-ti ...
Package: TRAY | MOQ: 360 | MPQ: 90

TLP2704(D4-TP,E(T / The T2535T-8G-TR is a high-current logic-level TRIAC designed for AC power control applications such as motor control, lighting dimming, and industrial switching. It features a repetitive peak off-state voltage (VDRM/VRRM) of 800V and a high RMS on-state current of 25A, enabling reliable operation in high-power environments. The device provides low gate trigger current typically around 35 mA, allowing direct interfacing with low-power control circuits and microcontrollers. It offers low on-state voltage drop of approximately 1.55V at rated current, ensuring reduced conduction losses. The TRIAC supports high surge current capability up to approximately 250A for short durations and features high commutation performance for inductive loads. Operating junction temperature range is -40°C to +150°C, and the D2PAK (TO-263) surface-mount package provides good thermal performance for compact PCB designs. It is widely used in solid-state relays, heating control systems, motor drives, and AC switching applications requiring robust and efficient power handling.
TLP2704(D4-TP,E(T

Description: The T2535T-8G-TR is a high-current logic-level TRIAC designed for AC power control applica ...
Package: T&R | MOQ: 1500 | MPQ: 1500

T2535T-8G-TR / The T2535T-8G-TR is a high-current logic-level TRIAC designed for AC power control applications such as motor control, lighting dimming, and industrial switching. It features a repetitive peak off-state voltage (VDRM/VRRM) of 800V and a high RMS on-state current of 25A, enabling reliable operation in high-power environments. The device provides low gate trigger current typically around 35 mA, allowing direct interfacing with low-power control circuits and microcontrollers. It offers low on-state voltage drop of approximately 1.55V at rated current, ensuring reduced conduction losses. The TRIAC supports high surge current capability up to approximately 250A for short durations and features high commutation performance for inductive loads. Operating junction temperature range is -40°C to +150°C, and the D2PAK (TO-263) surface-mount package provides good thermal performance for compact PCB designs. It is widely used in solid-state relays, heating control systems, motor drives, and AC switching applications requiring robust and efficient power handling.
T2535T-8G-TR

Description: The T2535T-8G-TR is a high-current logic-level TRIAC designed for AC power control applica ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STTH8L06FP / The STTH8L06FP is an ultrafast recovery high-voltage rectifier diode based on ST Turbo2 technology, designed for high-efficiency switching applications such as SMPS and power factor correction circuits. It features a repetitive peak reverse voltage (VRRM) of 600V and an average forward current (IF(AV)) of 8A, with a forward voltage drop typically around 0.85V (1.3V max at 8A), ensuring low conduction losses . The device offers fast reverse recovery time of approximately 75 ns (max 105 ns), reducing switching losses and improving efficiency in high-frequency operation . It supports high surge current capability up to 120A and low reverse leakage current typically around 8 µA at rated voltage . The diode operates over a wide junction temperature range of -40°C to +175°C and features low thermal resistance with fully insulated TO-220FP package for enhanced safety and thermal performance . It is widely used in boost converters, freewheeling applications, inverters, and industrial power supplies requiring fast switching and high reliability.
STTH8L06FP

Description: The STTH8L06FP is an ultrafast recovery high-voltage rectifier diode based on ST Turbo2 te ...
Package: TUBE | MOQ: 1000 | MPQ: 50

STM32F439VGT6 / The STM32F439VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 180 MHz and delivering up to 225 DMIPS performance. It features 1MB Flash memory and 256KB SRAM, supporting complex real-time and graphics-intensive embedded applications. The device operates over a supply voltage range of 1.7V to 3.6V and provides up to 82 I/O pins for flexible connectivity. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. A key feature is the integrated TFT-LCD controller with Chrom-ART accelerator and support for external SDRAM via FMC, enabling advanced graphical user interfaces. The MCU also includes hardware cryptographic acceleration (AES, HASH, RNG), CRC unit, DMA controller, and memory protection features. It supports multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is ideal for HMI systems, industrial automation, IoT gateways, and high-performance embedded applications requiring advanced graphics and secure connectivity.
STM32F439VGT6

Description: The STM32F439VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 ...
Package: TRAY | MOQ: 720 | MPQ: 90

STM32F437VGT6TR / The STM32F437VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 180 MHz and delivering up to 225 DMIPS processing performance. It features 1MB Flash memory and 256KB SRAM, enabling advanced embedded applications with high data throughput. The device operates over a supply voltage range of 1.7V to 3.6V and provides up to 82 I/O pins for extensive peripheral integration. It includes advanced peripherals such as multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. The MCU integrates hardware cryptographic acceleration (AES, HASH, RNG), CRC unit, DMA controller, and external memory interface (FMC) for extended system capabilities. It supports multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is suitable for industrial automation, communication systems, IoT gateways, and high-performance embedded applications requiring advanced connectivity and security features.
STM32F437VGT6TR

Description: The STM32F437VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F429VGT6TR / The STM32F429VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 180 MHz and delivering up to 225 DMIPS performance. It features 1MB Flash memory and 256KB SRAM, supporting complex real-time and graphics-intensive applications. The device operates over a supply voltage range of 1.7V to 3.6V and provides up to 82 I/O pins for extensive peripheral connectivity. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. A key feature is the integrated TFT-LCD controller with Chrom-ART accelerator, enabling efficient graphical user interfaces and display control. The MCU also includes hardware cryptographic acceleration (AES, HASH, RNG), CRC unit, DMA controller, and flexible external memory interface (FMC). It supports multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is ideal for HMI systems, industrial automation, IoT devices, multimedia applications, and high-performance embedded systems requiring advanced graphics and connectivity capabilities.
STM32F429VGT6TR

Description: The STM32F429VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F427VGT6TR / The STM32F427VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 180 MHz and delivering up to 225 DMIPS performance. It features 1MB Flash memory and 256KB SRAM, providing enhanced memory capacity for complex embedded applications. The device operates over a supply voltage range of 1.7V to 3.6V and offers up to 82 I/O pins for flexible connectivity. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, LCD-TFT controller, Chrom-ART accelerator, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. The MCU includes hardware cryptographic acceleration (AES, HASH, RNG), CRC unit, DMA controller, and advanced memory interfaces such as FMC for external memory expansion. It supports multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is ideal for industrial control, human-machine interfaces (HMI), IoT gateways, multimedia applications, and high-performance embedded systems requiring advanced graphics and connectivity features.
STM32F427VGT6TR

Description: The STM32F427VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F417VGT6TR / The STM32F417VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 168 MHz and delivering up to 210 DMIPS performance. It features 1MB Flash memory and 192KB SRAM, enabling complex and high-speed embedded applications. The device operates over a supply voltage range of 1.8V to 3.6V and provides up to 82 I/O pins for extensive peripheral connectivity. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. The MCU also includes advanced security features such as hardware cryptographic acceleration (AES, HASH, RNG), CRC unit, and DMA controller for efficient data processing. It offers multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is suitable for industrial control, IoT gateways, secure communication systems, and high-performance embedded applications.
STM32F417VGT6TR

Description: The STM32F417VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F415VGT6 / The STM32F415VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 168 MHz and delivering up to 210 DMIPS performance. It features 1MB Flash memory and 192KB SRAM, supporting complex real-time applications. The device operates over a supply voltage range of 1.8V to 3.6V and provides up to 82 I/O pins for flexible system integration. It integrates rich peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. The MCU includes advanced security features such as hardware cryptographic acceleration (AES, HASH, RNG) and CRC unit, making it suitable for secure applications. It also features DMA controller, low-power modes, and flexible clock system. Operating temperature range is -40°C to +85°C, and the LQFP-100 package enables compact and high-density PCB design. It is ideal for industrial automation, secure communication systems, motor control, and high-performance embedded applications.
STM32F415VGT6

Description: The STM32F415VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 ...
Package: TRAY | MOQ: 720 | MPQ: 90

STM32F407VGT6TR / The STM32F407VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) and DSP instructions, operating at up to 168 MHz and delivering up to 210 DMIPS processing performance. It features 1MB Flash memory and 192KB SRAM, enabling complex and high-speed embedded applications. The device operates over a supply voltage range of 1.8V to 3.6V and provides up to 82 I/O pins for extensive peripheral connectivity. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN, SDIO, USB OTG FS/HS, Ethernet MAC, timers, PWM modules, and a 12-bit ADC with up to 24 channels along with dual 12-bit DACs. The MCU includes a hardware random number generator, CRC unit, and DMA controller for efficient data handling. It offers multiple low-power modes and operates over a temperature range of -40°C to +85°C. Packaged in LQFP-100, it is suitable for industrial control, motor drives, IoT gateways, communication systems, and high-performance embedded applications requiring advanced connectivity and processing capability.
STM32F407VGT6TR

Description: The STM32F407VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F405VGT6TR / The STM32F405VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with a floating-point unit (FPU), operating at up to 168 MHz. It belongs to the STM32F4 series, offering an excellent balance of performance, power efficiency, and peripheral integration for advanced embedded applications. <br><br> This device features 1 MB of Flash memory and 192 KB of SRAM, enabling complex firmware development and real-time processing. It integrates a rich set of peripherals including multiple ADCs, DAC, timers, SPI, I2C, USART, CAN, USB OTG, and SDIO interfaces, making it highly versatile for industrial and consumer applications. <br><br> The STM32F405VGT6TR supports advanced control applications with DSP instructions, making it ideal for motor control, digital power conversion, and signal processing tasks. Its robust clock system and low-power modes ensure flexible power management across various operating conditions. <br><br> Packaged in a 100-pin LQFP surface-mount form factor, this microcontroller is widely used in embedded systems such as industrial automation, robotics, IoT devices, medical equipment, and consumer electronics. The “TR” suffix indicates tape-and-reel packaging suitable for automated assembly.
STM32F405VGT6TR

Description: The STM32F405VGT6TR is a high-performance 32-bit microcontroller based on the ARM Cortex-M ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32F302RBT6 / The STM32F302RBT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU), operating at up to 72 MHz and delivering enhanced DSP and control capabilities. It features 128KB Flash memory and 40KB SRAM, providing sufficient resources for complex embedded applications. The device operates over a supply voltage range of 2.0V to 3.6V and offers up to 51 I/O pins for flexible interfacing. It integrates advanced peripherals including multiple USART, SPI, I2C, CAN interface, USB 2.0 full-speed device, timers, high-resolution PWM, and a 12-bit ADC with up to 16 channels, along with a 12-bit DAC. It also includes fast analog comparators and operational amplifiers, enabling precision analog signal processing. The MCU features low power consumption with multiple low-power modes and integrated clock system. Operating temperature range is -40°C to +85°C, and the LQFP-64 package enables compact and efficient PCB design. It is suitable for motor control, industrial automation, power conversion, sensor interfacing, and advanced embedded control applications.
STM32F302RBT6

Description: The STM32F302RBT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 ...
Package: TRAY | MOQ: 640 | MPQ: 160

STM32F030F4P6TR / The STM32F030F4P6TR is a 32-bit microcontroller based on the ARM Cortex-M0 core, operating at up to 48 MHz and delivering efficient performance for cost-sensitive embedded applications. It features 16KB Flash memory and 4KB SRAM, supporting compact firmware implementations. The device operates over a supply voltage range of 2.4V to 3.6V and includes up to 18 I/O pins for flexible interfacing. It integrates peripherals such as USART, SPI, I2C, timers, PWM channels, watchdog timer, and a 12-bit ADC with up to 10 channels for analog signal acquisition. The MCU provides low power consumption with multiple low-power modes and typical active current around a few milliamperes depending on clock configuration. It includes internal RC oscillators and clock management system for simplified design. Operating temperature range is -40°C to +85°C, and the TSSOP-20 package enables compact surface-mount design. It is suitable for industrial control, consumer electronics, IoT devices, and general-purpose embedded applications requiring low cost and reliable performance.
STM32F030F4P6TR

Description: The STM32F030F4P6TR is a 32-bit microcontroller based on the ARM Cortex-M0 core, operating ...
Package: T&R | MOQ: 2500 | MPQ: 2500

SN75176BDR / The SN75176BDR is a robust <strong>differential bus transceiver</strong> developed by <strong>Texas Instruments</strong>, designed for bidirectional data communication over <strong>RS-485 and RS-422 communication standards</strong>. It integrates both a line driver and a receiver in a single device, enabling efficient half-duplex communication on multipoint bus systems. <br><br>The device operates from a single <strong>5V power supply (4.75V to 5.25V)</strong> and supports reliable data transmission in electrically noisy environments, making it ideal for industrial and long-distance communication networks. <br><br>It features a <strong>3-state differential driver and receiver</strong>, allowing multiple devices to share the same communication bus. Separate enable pins for the driver and receiver provide flexible direction control for half-duplex operation. <br><br>The SN75176BDR is designed for <strong>multipoint transmission over long bus lines</strong> and complies with <strong>TIA/EIA-422-B and TIA/EIA-485-A standards</strong>, ensuring compatibility with widely used industrial communication protocols. <br><br>With built-in <strong>thermal shutdown protection and current limiting</strong>, the device offers enhanced reliability under fault conditions. It also features a receiver input sensitivity of approximately <strong>±200mV with hysteresis (~50mV)</strong>, improving noise immunity. <br><br>Packaged in a compact <strong>8-pin SOIC surface-mount form factor</strong>, the SN75176BDR is suitable for high-density PCB designs and automated assembly processes. <br><br>The <strong>SN75176BDR</strong> is widely used in applications such as <strong>industrial automation, RS-485 communication networks, building control systems, motor control, data acquisition systems, and embedded communication interfaces</strong>, where reliable differential signal transmission is required.
SN75176BDR

Description: The SN75176BDR is a robust differential bus transceiver developed by ...
Package: T&R | MOQ: 2500 | MPQ: 2500

SN74LVC2T45DCTR / The SN74LVC2T45DCTR is a compact <strong>dual-bit dual-supply bus transceiver with configurable voltage-level translation</strong> developed by <strong>Texas Instruments</strong>, designed for bidirectional logic-level shifting between mixed-voltage systems. It supports flexible interfacing in embedded applications where different logic domains must communicate reliably. <br><br>The device features a <strong>fully configurable dual-rail architecture</strong>, allowing both VCCA and VCCB to operate anywhere from <strong>1.65V to 5.5V</strong>. This makes it suitable for voltage translation between common logic rails such as <strong>1.8V, 2.5V, 3.3V, and 5V</strong>. <br><br>The SN74LVC2T45DCTR includes <strong>direction control and 3-state outputs</strong>, enabling controlled bidirectional data flow in bus-oriented designs. It also provides <strong>VCC isolation</strong>, so if either supply rail is at ground, both ports enter a high-impedance state for safer system behavior. <br><br>With <strong>low power consumption</strong> and support for <strong>high-speed data translation</strong>, the device is well suited for communication interfaces, control buses, and general-purpose digital signal translation. It also supports <strong>Ioff partial-power-down operation</strong>, helping prevent back-drive current when one side of the system is powered down. <br><br>Housed in a compact <strong>8-pin SSOP surface-mount package</strong>, the SN74LVC2T45DCTR is optimized for space-constrained PCB layouts and automated assembly. <br><br>The <strong>SN74LVC2T45DCTR</strong> is widely used in applications such as <strong>microcontroller interfaces, FPGA and ASIC systems, SPI and GPIO level shifting, industrial control electronics, and mixed-voltage digital designs</strong>.
SN74LVC2T45DCTR

Description: The SN74LVC2T45DCTR is a compact dual-bit dual-supply bus transceiver with configu ...
Package: T&R | MOQ: 3000 | MPQ: 3000

SN65HVD1050D / The SN65HVD1050D is a high-speed Controller Area Network (CAN) transceiver designed for robust communication in automotive and industrial applications. It operates from a 4.75V to 5.25V supply and supports data rates up to 1 Mbps, compliant with ISO 11898 standards. The device provides differential transmit and receive capability with low electromagnetic emissions and high immunity to noise, ensuring reliable operation in harsh environments. It features a wide common-mode voltage range from -2V to +7V and includes dominant time-out, thermal shutdown, and short-circuit protection to enhance system safety. The transceiver offers low standby current typically below 1 µA and fast loop delay for improved communication timing. Operating temperature range is -40°C to +125°C, and the SOIC-8 package enables compact PCB design. It is suitable for automotive networks, industrial fieldbus systems, motor control, and distributed control systems requiring high-speed and reliable CAN communication.
SN65HVD1050D

Description: The SN65HVD1050D is a high-speed Controller Area Network (CAN) transceiver designed for ro ...
Package: T&R | MOQ: 2500 | MPQ: 2500

SN65176BDR / The SN65176BDR is a differential bus transceiver designed for bidirectional data communication on multipoint RS-485 and RS-422 networks. It operates from a single 5V supply and supports data rates up to 10 Mbps, enabling reliable high-speed communication over long distances. The device features a half-duplex configuration with separate driver and receiver enable controls, allowing flexible bus management. It provides a wide common-mode input voltage range of -7V to +12V and supports up to 32 nodes on the same bus. The transceiver offers low supply current typically around 70 mA during operation and includes thermal shutdown and short-circuit protection for enhanced reliability. It has a receiver input sensitivity of ±200 mV and provides high noise immunity for robust performance in industrial environments. Operating temperature range is 0°C to +70°C, and the SOIC-8 package enables compact surface-mount design. It is widely used in industrial automation, motor control, building control systems, and long-distance communication interfaces.
SN65176BDR

Description: The SN65176BDR is a differential bus transceiver designed for bidirectional data communica ...
Package: T&R | MOQ: 2500 | MPQ: 2500

SDSQUNC-016G-AN6MA / The SDSQUNC-016G-AN6MA is a 16GB microSDHC UHS-I memory card from SanDisk designed for reliable storage expansion in mobile and embedded systems. It supports UHS-I interface with read speeds up to approximately 80–150 MB/s depending on host device and conditions, and is rated as Class 10 for Full HD (1080p) video recording . The card provides stable performance for data logging, multimedia storage, and embedded applications requiring removable flash memory. It features A1-rated performance for faster app loading and improved random read/write operations in compatible systems . Operating with standard microSDHC voltage of 2.7V to 3.6V, it ensures compatibility with a wide range of devices including microcontrollers with SD interfaces, smartphones, and industrial systems. The card includes an SD adapter for extended compatibility and operates reliably across typical temperature ranges used in consumer and embedded environments. It is suitable for applications such as data storage, firmware updates, logging systems, cameras, and portable electronics.
SDSQUNC-016G-AN6MA

Description: The SDSQUNC-016G-AN6MA is a 16GB microSDHC UHS-I memory card from SanDisk designed for rel ...
Package: TRAY | MOQ: 500 | MPQ: 100

R5F113PLCLFB#15 / The R5F113PLCLFB#15 is a 16-bit microcontroller from the Renesas RL78/F15 automotive series, designed for high performance and ultra-low power consumption in embedded control systems. It operates at a maximum clock frequency of 32 MHz and features 512KB Flash memory, 32KB SRAM, and 16KB data EEPROM, providing ample memory for complex applications . The device supports a supply voltage range of 2.7V to 5.5V and offers up to 86 I/O pins for flexible interfacing . It integrates rich peripherals including CAN, LIN, SPI, I2C, and UART communication interfaces, along with PWM timers, watchdog timer, low-voltage detection, and temperature sensor . The MCU includes a 10-bit ADC with up to 33 channels and an 8-bit DAC, enabling precise analog signal acquisition . It features advanced motor control timers and hardware safety functions such as ECC on RAM and voltage monitoring, making it suitable for automotive applications . Typical operating current is in the milliampere range at full speed and drops to microampere levels in low-power modes . Operating temperature range is -40°C to +105°C, and the LQFP-100 package supports high-density PCB layouts, making it ideal for automotive control, motor drives, HVAC systems, and industrial embedded applications.
R5F113PLCLFB#15

Description: The R5F113PLCLFB#15 is a 16-bit microcontroller from the Renesas RL78/F15 automotive serie ...
Package: TRAY | MOQ: 720 | MPQ: 720

R7FA6M2AD3CFB#AA0 / The R7FA6M2AD3CFB#AA0 is a high-performance 32-bit microcontroller from the Renesas RA6M2 series, based on the Arm Cortex-M4F core with floating-point unit, operating at up to 120 MHz and delivering high processing performance for industrial and IoT applications. It features 512KB Flash memory, 384KB SRAM, and 32KB data Flash, supporting complex embedded systems and real-time processing . The device operates with a supply voltage range of 2.7V to 3.6V and provides up to 109–110 I/O pins, enabling extensive peripheral connectivity . It integrates advanced peripherals including Ethernet MAC with DMA, USB 2.0 Full-Speed, CAN, SPI, I2C, UART, SD/MMC interface, PWM timers, and DMA controller, making it suitable for communication-intensive and control applications . The MCU includes a 12-bit ADC with up to 22 channels and dual 12-bit DAC outputs, along with security features such as TRNG and memory protection unit, ensuring reliable and secure operation . It operates over an industrial temperature range of -40°C to +105°C and is packaged in LQFP-144 for high pin density and robust PCB integration. This microcontroller is ideal for industrial automation, motor control, smart metering, IoT gateways, and advanced embedded control systems requiring high performance and connectivity.
R7FA6M2AD3CFB#AA0

Description: The R7FA6M2AD3CFB#AA0 is a high-performance 32-bit microcontroller from the Renesas RA6M2 ...
Package: TRAY | MOQ: 360 | MPQ: 60

R5F524TEADFP#31 / The R5F524TEADFP#31 is a high-performance 32-bit microcontroller based on the RXv2 core from the RX24T series, operating at up to 80 MHz and delivering approximately 153 DMIPS processing performance with integrated single-precision floating-point unit (FPU) . It features 512KB Flash memory, 32KB SRAM, and 8KB data Flash, supporting robust embedded applications . The device operates over a supply voltage range of 2.7V to 5.5V and includes up to 80 I/O pins for flexible interfacing . It integrates rich peripherals such as CAN, I2C, SPI, and SCI/UART communication interfaces, DMA controller, watchdog timer, PWM modules, and multiple timers for control applications . The MCU includes a high-resolution 12-bit ADC with up to 22 channels and 8-bit DAC outputs, enabling precise analog signal processing . It also supports advanced motor control features and DSP instructions, making it suitable for inverter and motor drive systems . Operating temperature range is -40°C to +85°C, and the LQFP-100 package allows high-density PCB integration. This microcontroller is ideal for industrial automation, motor control, power conversion, and embedded control applications requiring high performance and reliability.
R5F524TEADFP#31

Description: The R5F524TEADFP#31 is a high-performance 32-bit microcontroller based on the RXv2 core fr ...
Package: TRAY | MOQ: 720 | MPQ: 90

PIC32MK1024MCF100T-I/PT / The PIC32MK1024MCF100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS32® microAptiv™ core with integrated floating point unit, operating at up to 120 MHz and delivering up to ~198 DMIPS processing performance. It features 1MB Flash memory, 256KB SRAM, and 4KB EEPROM, providing extensive memory resources for complex embedded and real-time control applications . The device operates over a supply voltage range of 2.2V to 3.6V and offers up to 78 programmable I/O pins, supporting high peripheral integration . It includes advanced peripherals such as multiple UART, SPI/I2S, CAN interfaces, USB OTG, DMA controller, motor control PWM modules, and a high-speed 12-bit ADC system with up to 42 channels, enabling precision measurement and control . The MCU supports DSP instructions, hardware multiply-accumulate units, and advanced motor control features like quadrature encoder interfaces and high-resolution PWM. It offers multiple low-power modes (Idle, Sleep, Deep Sleep) and integrated safety features such as watchdog timer, brown-out reset, and fail-safe clock monitor. Operating temperature range is -40°C to +85°C, and the TQFP-100 package enables high pin density and compact design. It is ideal for motor control, industrial automation, power conversion systems, and high-performance embedded applications.
PIC32MK1024MCF100T-I/PT

Description: The PIC32MK1024MCF100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS ...
Package: T&R | MOQ: 1200 | MPQ: 1200

PIC32MK0512MCF100T-I/PT / The PIC32MK0512MCF100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS32® microAptiv™ core, operating at up to 120 MHz and delivering high computational performance for advanced embedded and motor control applications. It integrates 512KB Flash memory, 128KB SRAM, and 4KB EEPROM, providing sufficient memory resources for complex firmware and real-time processing tasks . The device operates over a supply voltage range of 2.2V to 3.6V and offers up to 78 I/O pins, enabling extensive peripheral connectivity . It includes rich peripherals such as multiple ADC channels (up to 42 channels, 12-bit), motor control PWM modules, DMA controller, CAN, I2S, SPI, UART, and watchdog timer, making it highly suitable for industrial and control systems . The MCU supports advanced features like hardware motor control acceleration, high-speed data transfer, and integrated clock sources. It operates within an industrial temperature range of -40°C to +85°C and is packaged in a TQFP-100 form factor, enabling high pin density and compact PCB design. Typical applications include motor control, industrial automation, power conversion systems, and embedded communication systems.
PIC32MK0512MCF100T-I/PT

Description: The PIC32MK0512MCF100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS ...
Package: T&R | MOQ: 1200 | MPQ: 1200

NCP2890DMR2G / The NCP2890DMR2G is a low-power Class-AB mono audio power amplifier designed for portable and battery-powered applications, capable of delivering up to 1.08W output power into an 8Ω load at a 5V supply. It operates over a wide supply voltage range of 2.2V to 5.5V, making it suitable for mobile and low-voltage systems. The device features low total harmonic distortion (THD) around 0.04% and high PSRR, allowing direct battery connection without additional regulation. It supports both differential and single-ended inputs and provides an output current capability up to approximately 500 mA. The amplifier includes integrated “pop-and-click” noise reduction circuitry, thermal shutdown, short-circuit protection, and ultra-low shutdown current mode (nanoamp range), ensuring reliable and efficient operation. Typical quiescent current is around 1.5–1.7 mA. Operating temperature range is -40°C to +85°C, and the compact MSOP-8 package enables space-saving PCB design, making it ideal for portable audio devices, wireless communication equipment, and embedded sound applications.
NCP2890DMR2G

Description: The NCP2890DMR2G is a low-power Class-AB mono audio power amplifier designed for portable ...
Package: T&R | MOQ: 4000 | MPQ: 4000

MURF860G / The MURF860G is an ultrafast recovery rectifier diode designed for high-efficiency switching power applications. It features a repetitive peak reverse voltage of 600V and an average forward current of 8A, making it suitable for medium-power rectification tasks. The device offers low forward voltage drop typically around 2.2V at 8A and fast reverse recovery time of approximately 50 ns, enabling reduced switching losses and improved efficiency in high-frequency circuits . It provides low reverse leakage current around 5 µA at rated voltage and high surge current capability, supporting robust operation in demanding environments . The diode operates over a wide junction temperature range of -55°C to +150°C and features glass-passivated construction for enhanced reliability. Packaged in a TO-220 full-pack isolated form, it offers good thermal performance and electrical isolation, making it ideal for SMPS, freewheeling, snubber circuits, inverters, and industrial power conversion applications.
MURF860G

Description: The MURF860G is an ultrafast recovery rectifier diode designed for high-efficiency switchi ...
Package: TUBE | MOQ: 1000 | MPQ: 50

MJD127T4 / The MJD127T4 is a PNP Darlington power transistor designed for high-gain switching and amplification applications. It features a collector-emitter voltage (VCEO) of -100V and a continuous collector current up to -8A, with high DC current gain (hFE) typically around 1000, enabling efficient low-base-drive operation. The device provides collector-emitter saturation voltage around -2V at high current levels and supports power dissipation up to approximately 20–30W depending on thermal conditions. It has a transition frequency of about 4 MHz and includes an integrated Darlington configuration for improved gain performance. The transistor operates over a temperature range of -55°C to +150°C and offers robust performance with good thermal characteristics. Packaged in a DPAK (TO-252) surface-mount form, it is suitable for power switching, motor control, relay drivers, and industrial applications requiring high current and high gain.
MJD127T4

Description: The MJD127T4 is a PNP Darlington power transistor designed for high-gain switching and amp ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM78L05ACZ/NOPB / The LM78L05ACZ/NOPB is a fixed positive linear voltage regulator designed to provide a stable 5V output with output current up to 100 mA. It operates over an input voltage range of approximately 7V to 30V and features low quiescent current typically around 3–6 mA. The device offers output voltage accuracy of ±5% and provides good line and load regulation, ensuring stable performance in various conditions. It includes built-in protection features such as current limiting, thermal shutdown, and safe operating area protection, enhancing reliability. The regulator has a dropout voltage of approximately 2V and supports operation over a temperature range of -40°C to +125°C. Packaged in a TO-92 through-hole form factor, it is suitable for simple power supply designs, embedded systems, and low-current applications requiring reliable 5V regulation.
LM78L05ACZ/NOPB

Description: The LM78L05ACZ/NOPB is a fixed positive linear voltage regulator designed to provide a sta ...
Package: BULK | MOQ: 1800 | MPQ: 1800

LM46002PWPR / The LM46002PWPR is a high-efficiency synchronous step-down (buck) regulator designed for wide input voltage applications, operating from 3.5V to 60V and delivering up to 2A continuous output current. It features an adjustable output voltage down to 0.8V with high accuracy (±1%), making it suitable for a wide range of industrial and embedded systems. The device operates with a switching frequency adjustable from 200 kHz to 2.2 MHz and supports external synchronization for noise-sensitive applications. It integrates high-side and low-side MOSFETs, providing efficiency up to 95% and reducing external component count. The regulator includes advanced features such as programmable soft-start, power-good indicator, frequency synchronization, spread spectrum operation for EMI reduction, and internal compensation. Protection features include thermal shutdown, cycle-by-cycle current limiting, and undervoltage lockout. Typical quiescent current is around 40 µA in light-load mode. Operating temperature range is -40°C to +125°C, and the HTSSOP-16 package with exposed pad ensures good thermal performance, making it ideal for industrial power supplies, automotive systems, and distributed power architectures.
LM46002PWPR

Description: The LM46002PWPR is a high-efficiency synchronous step-down (buck) regulator designed for w ...
Package: T&R | MOQ: 2000 | MPQ: 2000

LM339DT / The LM339DT is a quad differential comparator IC designed for low-power analog signal comparison in a wide range of applications. It operates over a broad supply voltage range from 2V to 36V (single supply) or ±1V to ±18V (dual supply), with low supply current typically around 0.8 mA for all four comparators. The device features open-collector outputs capable of sinking up to 16 mA, allowing flexible interfacing with various logic levels. It offers input offset voltage typically around 2 mV, input bias current of approximately 25 nA, and propagation delay around 1.3 µs, enabling reliable and reasonably fast switching performance. The comparator supports input common-mode voltage range including ground, making it suitable for single-supply operation. Operating temperature range is -40°C to +125°C, and the SOIC-14 package enables compact PCB design. It is widely used in level detection, zero-crossing detection, voltage monitoring, oscillators, and general-purpose analog comparison applications.
LM339DT

Description: The LM339DT is a quad differential comparator IC designed for low-power analog signal comp ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM2574MX-5.0/NOPB / The LM2574MX-5.0/NOPB is a monolithic step-down (buck) switching regulator designed to deliver a fixed 5V output with high efficiency and minimal external components. It operates over a wide input voltage range of 4V to 40V and provides output current up to 0.5A, making it suitable for a variety of power supply applications. The device features a fixed switching frequency of 52 kHz, simplifying filter design and reducing EMI concerns. It includes internal frequency compensation, a high-efficiency internal switch, and thermal shutdown protection, along with current limiting and safe operating area protection. The regulator offers output voltage accuracy of ±4% and typical efficiency up to 80–90% depending on operating conditions. It operates over a temperature range of -40°C to +125°C, and the SOIC-8 package enables compact surface-mount implementation. It is ideal for industrial power supplies, battery-powered systems, embedded applications, and general-purpose DC-DC conversion.
LM2574MX-5.0/NOPB

Description: The LM2574MX-5.0/NOPB is a monolithic step-down (buck) switching regulator designed to del ...
Package: T&R | MOQ: 1000 | MPQ: 1000

L78L05ACZTR / The L78L05ACZTR is a reliable <strong>fixed 5V linear voltage regulator</strong> developed by <strong>STMicroelectronics</strong>, designed to provide stable and regulated output voltage for a wide range of electronic circuits. It is part of the popular 78Lxx series, known for simplicity and robustness in power supply design. <br><br>The device delivers a fixed <strong>5V output voltage with a maximum output current of up to 100mA</strong>, making it suitable for low-power applications such as microcontrollers, sensors, and analog circuits. <br><br>It operates with an input voltage range typically up to <strong>30V</strong>, providing flexibility in various power supply configurations. The regulator includes built-in <strong>thermal overload protection, short-circuit protection, and safe operating area (SOA) control</strong>, ensuring high reliability and protection against fault conditions. <br><br>The L78L05ACZTR features a <strong>low quiescent current</strong> and stable output performance with minimal external components, simplifying circuit design and reducing overall system cost. <br><br>Packaged in a <strong>SOT-223 surface-mount form factor</strong>, it is optimized for automated assembly and efficient heat dissipation in compact PCB layouts. <br><br>The <strong>L78L05ACZTR</strong> is widely used in applications such as <strong>embedded systems, consumer electronics, industrial control circuits, power management modules, and communication devices</strong>, where a stable 5V supply is required.
L78L05ACZTR

Description: The L78L05ACZTR is a reliable fixed 5V linear voltage regulator developed ...
Package: T&R | MOQ: 2000 | MPQ: 2000

ISO7221ADR / The ISO7221ADR is a dual-channel digital isolator based on capacitive isolation technology, designed to provide high-speed signal isolation with one forward and one reverse channel configuration. It supports data rates up to 25 Mbps and operates over a supply voltage range of 2.8V to 5.5V on both sides of the isolation barrier. The device provides isolation voltage up to 2500 Vrms and offers high common-mode transient immunity exceeding 25 kV/µs, ensuring reliable operation in noisy industrial environments. It features low propagation delay of approximately 10 ns and low pulse width distortion, enabling accurate high-speed data transmission. The IC consumes low power with typical supply current around 1.5–2 mA per channel and includes fail-safe default output functionality. Operating temperature range is -40°C to +125°C, and the SOIC-8 package enables compact PCB integration, making it suitable for SPI, UART, CAN interface isolation, industrial automation, and data acquisition systems.
ISO7221ADR

Description: The ISO7221ADR is a dual-channel digital isolator based on capacitive isolation technology ...
Package: T&R | MOQ: 2500 | MPQ: 2500

IRFR220NTRPBF / IRFR220NTRPBF, N-Channel 200V 5A(Tc) 43W(Tc) Surface Mount TO-252AA (DPAK) IRFR220NTRPBF, IRFR220NTRPBF-ND, IRFR220NPBFCT, IRFR220NTRPBFTR, IRFR220NPBFTR, SP001577980, IRFR220NPBFDKR-ND, IRFR220NTRPBFDKR, IRFR220NPBFCT-ND, IRFR220NTRPBFCT, IRFR220NPBFTR-ND, IRFR220NPBFDKR
IRFR220NTRPBF

Description: IRFR220NTRPBF, N-Channel 200V 5A(Tc) 43W(Tc) Surface Mount TO-252AA (DPAK) IRFR220NTRPBF, ...
Package: T&R | MOQ: 2000 | MPQ: 2000

IRFB4127PBF / The IRFB4127PBF is a high-performance N-channel HEXFET® power MOSFET designed for high current and low conduction loss applications. It features a drain-source voltage (VDS) of 200V and a continuous drain current of up to 76A, with low on-resistance of approximately 20 mΩ at VGS = 10V, ensuring high efficiency in power switching applications . The device supports gate-source voltage up to ±20V and has a threshold voltage range of approximately 3V to 5V . It offers high power dissipation capability up to 375W and fast switching performance with rise time around 18 ns and fall time around 22 ns, along with total gate charge of about 100–150 nC . The MOSFET operates over a wide temperature range of -55°C to +175°C and provides strong avalanche and dv/dt ruggedness for reliability in demanding environments . Packaged in TO-220, it is ideal for DC-DC converters, motor drives, battery management systems, inverters, and high-current switching applications.
IRFB4127PBF

Description: The IRFB4127PBF is a high-performance N-channel HEXFET® power MOSFET designed for high cu ...
Package: TUBE | MOQ: 500 | MPQ: 50

IR2109PBF / The IR2109PBF is a high-voltage, high-speed half-bridge gate driver IC designed for driving N-channel MOSFETs and IGBTs in power conversion applications. It supports a high-side floating channel up to 600V and operates with a gate drive supply voltage range of 10V to 20V . The device provides dual output drivers with peak source/sink currents up to approximately 200 mA / 350 mA, enabling efficient switching performance . It features built-in undervoltage lockout (UVLO) for both high-side and low-side channels, internal dead-time of about 540 ns, and cross-conduction prevention logic for safe operation . The IC offers fast switching characteristics with propagation delays around 750 ns turn-on and 200 ns turn-off, along with rise/fall times of approximately 220 ns / 80 ns . It is compatible with CMOS and TTL logic inputs (down to 3.3V) and includes high dV/dt immunity for robust operation in noisy environments . Operating temperature range is -40°C to +125°C, and the DIP-8 package enables easy integration in power supplies, motor drives, inverters, and industrial switching applications.
IR2109PBF

Description: The IR2109PBF is a high-voltage, high-speed half-bridge gate driver IC designed for drivin ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IPA80R900P7XKSA1 / The IPA80R900P7XKSA1 is an N-channel super junction power MOSFET from Infineon’s CoolMOS™ P7 series, designed for high-efficiency switching in offline power supply applications. It features a drain-source voltage (VDS) of 800V and continuous drain current up to 6A, with low on-resistance of approximately 0.75–0.9Ω at VGS = 10V, enabling reduced conduction losses . The device offers low gate charge (~15–17 nC) and low capacitances, resulting in reduced switching losses and improved efficiency in high-frequency operation . It supports gate-source voltage up to ±20V and has a threshold voltage around 3V, ensuring easy drive compatibility . The MOSFET provides power dissipation up to 26–27W and operates over a wide temperature range of -55°C to +150°C . It integrates ESD protection and is optimized for flyback, SMPS, LED drivers, adapters, and industrial power applications, offering improved efficiency and thermal performance compared to previous generations .
IPA80R900P7XKSA1

Description: The IPA80R900P7XKSA1 is an N-channel super junction power MOSFET from Infineon’s CoolMOS ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IKA15N60TXKSA1 / The IKA15N60TXKSA1 is a high-efficiency N-channel IGBT based on Infineon’s TRENCHSTOP™ field-stop technology, designed for fast switching and low conduction losses in power electronics applications. It features a collector-emitter voltage (VCE) of 600V and continuous collector current up to 14.7A (up to ~18A under certain conditions), with pulsed current capability of 45A . The device offers low saturation voltage typically around 1.5–2.05V, reducing conduction losses and improving overall efficiency . It supports gate-emitter voltage up to ±20V and has a gate charge of approximately 87 nC, enabling efficient gate driving . Switching performance is optimized with fast turn-on (~17–28 ns) and turn-off (~188–238 ns) times, along with low switching energy (~570 µJ) . The device integrates a fast recovery anti-parallel diode, enhancing performance in inverter and motor drive applications . It operates over a wide junction temperature range of -40°C to +175°C and has a maximum power dissipation of approximately 35.7W . Packaged in a TO-220 full-pack form, it provides electrical isolation and robust thermal performance, making it suitable for SMPS, motor control, inverters, and industrial power conversion systems.
IKA15N60TXKSA1

Description: The IKA15N60TXKSA1 is a high-efficiency N-channel IGBT based on Infineon’s TRENCHSTOP™ ...
Package: TUBE | MOQ: 50 | MPQ: 50

INA280A1IDCKR / The INA280A1IDCKR is a high-precision current sense amplifier designed for high-side current measurement over a wide common-mode voltage range from 2.7V to 120V, making it suitable for industrial and high-voltage applications. It operates with a supply voltage range of 2.7V to 20V and features a fixed gain of 20 V/V, enabling accurate conversion of small shunt voltage drops into measurable output signals. The device offers excellent accuracy with gain error up to ±0.5% and low input offset voltage typically around 15 µV (max ±150 µV), along with low offset drift of ±1 µV/°C . It provides high bandwidth of 1.1 MHz and slew rate of 2 V/µs, allowing fast transient response and real-time current monitoring . The amplifier features high common-mode rejection ratio up to 140 dB and low quiescent current around 370 µA, ensuring efficient operation in precision systems . Operating temperature range is -40°C to +125°C, and the compact SC70-5 package enables space-saving PCB design, making it ideal for power management, motor control, overcurrent protection, and industrial measurement applications.
INA280A1IDCKR

Description: The INA280A1IDCKR is a high-precision current sense amplifier designed for high-side curre ...
Package: T&R | MOQ: 3000 | MPQ: 3000

HCPL-4506-500E / The HCPL-4506-500E is a high-performance logic-output optocoupler designed for intelligent power module (IPM) and gate drive interface applications, providing galvanic isolation of up to 3750 Vrms. It features a single-channel configuration with an open-collector, Schottky-clamped output capable of driving up to 15 mA, and operates over a supply voltage range of 4.5V to 30V . The input side consists of a GaAsP LED with forward voltage typically around 1.5V and forward current up to 25 mA . The device offers high common-mode transient immunity of at least 15 kV/µs, ensuring reliable operation in noisy high-voltage environments . It provides fast switching with propagation delays of approximately 400–550 ns and low pulse width distortion (~450 ns), enabling efficient inverter and motor control performance . The optocoupler operates over an industrial temperature range of -40°C to +100°C and includes an optional internal pull-up resistor for simplified circuit design . Packaged in SOIC-8 (gull wing), it is ideal for IGBT/MOSFET gate driving, industrial inverters, motor drives, and high-voltage isolation applications.
HCPL-4506-500E

Description: The HCPL-4506-500E is a high-performance logic-output optocoupler designed for intelligent ...
Package: T&R | MOQ: 1000 | MPQ: 1000

FSL116HR / The FSL116HR is an integrated offline switching regulator IC that combines a fixed-frequency PWM controller and a high-voltage power MOSFET for AC-DC power conversion applications. It operates from a wide input voltage range up to 650V DC and supports output power levels typically up to 15–20W depending on design conditions. The device features a switching frequency of approximately 67 kHz and includes advanced control functions such as pulse-by-pulse current limiting, overvoltage protection, overload protection, and thermal shutdown for enhanced reliability. It utilizes green-mode operation to reduce standby power consumption below 100 mW, making it suitable for energy-efficient designs. The IC provides startup current below 100 µA and operating current around 2–5 mA, improving efficiency in low-power conditions. Operating temperature range is -40°C to +125°C, and the DIP-8 package allows easy implementation in power supply circuits. It is ideal for SMPS, chargers, adapters, and consumer power applications.
FSL116HR

Description: The FSL116HR is an integrated offline switching regulator IC that combines a fixed-frequen ...
Package: TUBE | MOQ: 1000 | MPQ: 50

FDN5618P / The FDN5618P is a high-performance <strong>P-Channel MOSFET</strong> developed by <strong>onsemi</strong>, designed for efficient power management and switching applications. It utilizes advanced <strong>PowerTrench technology</strong> to achieve low on-resistance and fast switching performance. <br><br>The device supports a maximum <strong>drain-source voltage of -60V</strong> and a continuous drain current of up to <strong>-1.25A</strong>, making it suitable for low to medium power applications such as load switching and DC-DC conversion. <br><br>It features a low <strong>RDS(on)</strong> of approximately <strong>0.170Ω at VGS = -10V</strong> and <strong>0.230Ω at VGS = -4.5V</strong>, enabling reduced conduction losses and improved efficiency in power circuits. <br><br>The FDN5618P operates with a <strong>logic-level gate drive</strong>, allowing direct interfacing with microcontrollers and low-voltage control circuits. Its fast switching characteristics make it ideal for high-frequency applications. <br><br>Housed in a compact <strong>SOT-23 (SuperSOT-3) surface-mount package</strong>, the device is optimized for space-constrained PCB designs and supports automated assembly processes. <br><br>The <strong>FDN5618P</strong> is widely used in applications such as <strong>DC-DC converters, load switching circuits, battery management systems, portable electronics, and general power management solutions</strong>, where efficient and reliable switching performance is required.
FDN5618P

Description: The FDN5618P is a high-performance P-Channel MOSFET developed by ...
Package: T&R | MOQ: 3000 | MPQ: 3000

DM1AA-SF-PEJ(82) / The DM1AA-SF-PEJ(82) is a surface-mount Secure Digital (SD) card connector designed for embedded and portable electronic applications, featuring a push-push insertion/ejection mechanism for reliable card handling. It provides 9 signal contacts (plus additional switch contacts) with gold-plated terminals for improved conductivity and durability. The connector supports a maximum current of approximately 0.5A and a maximum voltage of 125V, with contact pitch around 2.5 mm and profile height of approximately 2.9 mm . It is rated for mechanical durability up to 10,000 insertion/removal cycles and includes card detection and write-protect switch functions. The device features right-angle PCB mounting with surface-mount termination and high-strength metal shielding to withstand mechanical stress. Operating conditions support standard electronic environments, and the compact design makes it suitable for industrial devices, consumer electronics, data logging systems, and embedded storage applications.
DM1AA-SF-PEJ(82)

Description: The DM1AA-SF-PEJ(82) is a surface-mount Secure Digital (SD) card connector designed for em ...
Package: T&R | MOQ: 450 | MPQ: 450

CS5173EDR8G / The CS5173EDR8G is a versatile DC-DC switching regulator IC designed to support multiple topologies including boost, buck-boost, flyback, forward, and SEPIC configurations. It operates over a wide input voltage range of 2.7V to 30V and provides an adjustable output voltage starting from 1.28V up to 40V (switch limit), with an integrated switch current capability of 1.5A . The device features a fixed switching frequency of approximately 560 kHz, enabling compact external component selection and improved efficiency. It utilizes current-mode control for stable operation and fast transient response, with typical operating current around 5.5 mA . The IC includes built-in protection features such as thermal shutdown (~180°C), current limiting, and undervoltage lockout. Operating temperature range is -40°C to +125°C, and the SOIC-8 package allows compact PCB design, making it suitable for portable electronics, power supplies, industrial systems, and battery-powered applications.
CS5173EDR8G

Description: The CS5173EDR8G is a versatile DC-DC switching regulator IC designed to support multiple t ...
Package: T&R | MOQ: 2500 | MPQ: 2500













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |