All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Fuse
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
SSD
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

SI7021-A20-GM1R / The SI7021-A20-GM1R is a high-accuracy digital humidity and temperature sensor integrating a calibrated sensing element and signal processing circuitry in a compact DFN-6 package. It operates over a supply voltage range of 1.9V to 3.6V and communicates via a standard I2C interface with low power consumption typically around 150 µA during measurement and less than 60 nA in standby mode. The device provides relative humidity measurement range from 0% to 100% RH with accuracy of ±2% RH, and temperature measurement range from -10°C to +85°C with accuracy of ±0.4°C. It features fast response time, factory calibration, and long-term stability with drift less than 0.25% RH per year. The sensor includes an integrated heater for condensation removal and offers 14-bit resolution for humidity and 12–14-bit for temperature. Operating temperature range is -40°C to +125°C, making it suitable for HVAC, industrial monitoring, IoT devices, and environmental sensing applications.
SI7021-A20-GM1R

Description: The SI7021-A20-GM1R is a high-accuracy digital humidity and temperature sensor integrating ...
Package: T&R | MOQ: 2500 | MPQ: 2500

STM8L051F3P6TR / The STM8L051F3P6TR is an ultra-low-power 8-bit microcontroller based on the STM8 core, designed for energy-efficient embedded applications. It operates at a maximum clock frequency of 16 MHz and features 8KB Flash memory, 1KB SRAM, and 256 bytes EEPROM . The device supports a supply voltage range of 1.8V to 3.6V and includes up to 18 programmable I/O pins, along with peripherals such as USART, SPI, I2C, 10-channel 12-bit ADC, timers, PWM, watchdog timer, and DMA controller . It is optimized for low-power consumption with multiple power-saving modes, including active-halt and halt modes with current as low as hundreds of nanoamperes . The MCU provides processing performance up to 16 MIPS and features an internal oscillator, brown-out reset, and robust interrupt system. Operating temperature range is -40°C to +85°C, and the TSSOP-20 package allows compact surface-mount integration, making it ideal for battery-powered devices, industrial control, smart sensors, and IoT applications.
STM8L051F3P6TR

Description: The STM8L051F3P6TR is an ultra-low-power 8-bit microcontroller based on the STM8 core, des ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TPS40210DGQR / The TPS40210DGQR is a wide input voltage current-mode DC-DC controller designed for boost, flyback, and SEPIC power supply topologies, offering high flexibility in power management applications. It operates over a wide supply voltage range of 4.5V to 52V and supports adjustable switching frequency from 35 kHz to 1 MHz, enabling optimization for efficiency and component size . The device utilizes fixed-frequency current-mode control to provide fast transient response and simplified loop compensation, with an internal 700 mV reference voltage for accurate regulation . It integrates a low-side MOSFET driver, programmable soft-start function, slope compensation, and overcurrent protection with automatic retry, ensuring reliable operation in demanding environments . The IC supports synchronization with external clocks and includes enable and frequency control features for flexible system design . Operating temperature range is -40°C to +125°C, and the HVSSOP-10 package enables compact PCB layout. It is widely used in LED drivers, industrial power supplies, battery-powered systems, and high-efficiency DC-DC conversion applications.
TPS40210DGQR

Description: The TPS40210DGQR is a wide input voltage current-mode DC-DC controller designed for boost, ...
Package: T&R | MOQ: 2500 | MPQ: 2500

FMMT619TA / The FMMT619TA is a high-performance NPN bipolar junction transistor designed for low saturation voltage and high current switching applications. It features a collector-emitter voltage (VCEO) of 50V and supports a high continuous collector current of up to 2A, with low saturation voltage typically below 200 mV at high current levels, ensuring efficient switching performance . The device provides high DC current gain (hFE) typically ≥200 at 1A and offers a transition frequency around 165 MHz, enabling fast switching and amplification . It has a maximum power dissipation of approximately 625 mW and very low collector leakage current (~100 nA), improving efficiency and reliability . The transistor operates over a wide temperature range of -55°C to +150°C and is packaged in a compact SOT-23-3 surface-mount form factor, making it suitable for space-constrained designs. Typical applications include MOSFET gate driving, DC-DC converters, LED drivers, and motor control circuits where high current and low loss are critical .
FMMT619TA

Description: The FMMT619TA is a high-performance NPN bipolar junction transistor designed for low satur ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TLV75533PDBVR / The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to deliver a fixed 3.3V output with high efficiency and low power consumption. It operates over an input voltage range of 1.45V to 5.5V and provides output current up to 500 mA, making it suitable for powering microcontrollers and digital circuits . The device features low quiescent current of approximately 25–31 µA, ensuring excellent performance in battery-powered applications . It offers low dropout voltage of about 238 mV at full load (500 mA), high output accuracy of ±1%, and power supply rejection ratio (PSRR) around 46 dB at 100 kHz . Additional features include built-in soft-start, foldback current limiting, active output discharge, and thermal shutdown protection. The regulator is stable with small 1 µF ceramic capacitors and operates over a temperature range of -40°C to +125°C. Packaged in SOT-23-5, it is ideal for portable devices, IoT systems, industrial electronics, and low-power embedded applications.
TLV75533PDBVR

Description: The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to deliver a fi ...
Package: T&R | MOQ: 3000 | MPQ: 3000

LM78M05CDTX/NOPB / The LM78M05CDTX/NOPB is a fixed positive linear voltage regulator designed to deliver a stable 5V output with output current up to 500 mA. It operates over an input voltage range of approximately 7.2V to 35V and features low quiescent current typically around 3–10 mA, ensuring efficient performance in various applications . The device provides good line and load regulation (~100 mV), high power supply rejection ratio (~78 dB at 120 Hz), and built-in protection features including current limiting, thermal shutdown, and safe operating area protection for enhanced reliability . It offers output voltage tolerance around ±3% and is capable of continuous operation with proper heat dissipation. The regulator operates over a wide temperature range of -40°C to +125°C and is packaged in a TO-252 (DPAK) surface-mount form, making it suitable for power supplies, industrial electronics, consumer devices, and embedded systems requiring stable 5V regulation.
LM78M05CDTX/NOPB

Description: The LM78M05CDTX/NOPB is a fixed positive linear voltage regulator designed to deliver a st ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TLV2316IDR / The TLV2316IDR is a dual low-power CMOS operational amplifier featuring rail-to-rail input and output capability, designed for low-voltage and energy-efficient analog applications. It operates over a wide supply voltage range of 1.8V to 5.5V and provides a unity-gain bandwidth of 10 MHz with a slew rate of 6 V/µs, ensuring good dynamic performance . The device has low quiescent current of approximately 400 µA per channel and very low input bias current (~10 pA), making it suitable for high-impedance sensor interfaces . It offers low input offset voltage around 0.75 mV and low noise density of 12 nV/√Hz at 1 kHz, providing accurate signal amplification . The amplifier supports output current up to 50 mA per channel and maintains stable operation with rail-to-rail swing close to supply limits. Operating temperature range is -40°C to +125°C, and the SOIC-8 package enables compact PCB integration. It is ideal for signal conditioning, sensor interfaces, portable devices, data acquisition systems, and general-purpose analog applications.
TLV2316IDR

Description: The TLV2316IDR is a dual low-power CMOS operational amplifier featuring rail-to-rail input ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TLC7524CN / The TLC7524CN is an 8-bit multiplying digital-to-analog converter (DAC) designed using CMOS technology for easy interfacing with microprocessors via a parallel data bus. It operates over a supply voltage range of approximately 5V to 15V and features low power consumption typically below 5 mW . The device provides 8-bit resolution with linearity error up to ±0.5 LSB and fast settling time of about 100 ns, enabling high-speed analog signal generation . It utilizes an R-2R ladder architecture with current output (unbuffered), requiring an external operational amplifier for voltage conversion, and supports multiplying operation where output voltage is proportional to both reference input and digital code . The DAC features parallel interface control signals (CS, WR) and input latches compatible with microprocessor bus systems, allowing direct integration into digital control applications. Operating temperature range is typically 0°C to +70°C, and the DIP-16 package supports through-hole mounting. It is suitable for signal generation, gain control, waveform synthesis, and general-purpose data acquisition systems.
TLC7524CN

Description: The TLC7524CN is an 8-bit multiplying digital-to-analog converter (DAC) designed using CMO ...
Package: TUBE | MOQ: 500 | MPQ: 25

ADS1220IPWR / The ADS1220IPWR is a precision 24-bit sigma-delta analog-to-digital converter designed for high-resolution measurement applications such as sensor interfaces and industrial instrumentation. It operates over a supply voltage range of 2.3V to 5.5V and integrates a low-noise programmable gain amplifier (PGA) with gains up to 128, allowing accurate measurement of low-level signals. The device supports programmable data rates from 20 SPS up to 2000 SPS and achieves effective resolution up to 23 bits with input-referred noise as low as 17 nV RMS at low data rates. It features differential and single-ended inputs, SPI-compatible serial interface, and low power consumption typically around 300 µA in active mode and less than 1 µA in standby. The ADC includes an internal voltage reference, temperature sensor, and digital filter, reducing external component requirements. It provides excellent accuracy with ±0.001% typical INL and high common-mode rejection. Operating temperature range is -40°C to +125°C, and the TSSOP-16 package enables compact design, making it suitable for weigh scales, pressure sensors, industrial automation, and precision data acquisition systems.
ADS1220IPWR

Description: The ADS1220IPWR is a precision 24-bit sigma-delta analog-to-digital converter designed for ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MAX44280AXT+T / The MAX44280AXT+T is a high-precision high-side current-sense amplifier designed for accurate current monitoring in low-voltage systems. It operates over a supply voltage range of 1.7V to 5.5V and supports common-mode input voltages from 0V up to 36V, enabling high-side current measurement in various power applications. The device features a fixed gain of 20 V/V and provides low input offset voltage typically around 100 µV with low drift, ensuring high measurement accuracy. It offers low quiescent current of approximately 20 µA, making it ideal for battery-powered applications. The amplifier has a bandwidth of about 100 kHz and fast response time, suitable for real-time current monitoring. It includes rail-to-rail output capability and high CMRR for reliable operation in noisy environments. Operating temperature range is -40°C to +125°C, and the compact SC70-6 package allows space-saving PCB design, making it suitable for portable devices, power management, battery monitoring, and industrial current sensing applications.
MAX44280AXT+T

Description: The MAX44280AXT+T is a high-precision high-side current-sense amplifier designed for accur ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MAX1846EUB+T / The MAX1846EUB+T is a high-efficiency current-mode PWM controller designed for inverting DC-DC converter applications, enabling generation of negative output voltages in compact power designs. It operates over an input voltage range of 3V to 16.5V and supports output voltages from approximately -0.5V to -200V depending on external components and topology . The device features adjustable switching frequency from 100 kHz to 500 kHz via an external resistor, allowing optimization between efficiency and component size . It uses current-mode control for fast transient response and improved loop stability, with an internal reference voltage of 1.25V for accurate regulation . The controller drives an external P-channel MOSFET and supports output power levels up to approximately 30W depending on design conditions . It includes built-in soft-start, current limiting, and enable control, with typical operating current around 8 mA. Operating temperature range is -40°C to +85°C, and the compact µMAX-10 package allows space-efficient PCB design, making it suitable for telecom systems, industrial power supplies, networking equipment, and negative voltage generation circuits.
MAX1846EUB+T

Description: The MAX1846EUB+T is a high-efficiency current-mode PWM controller designed for inverting D ...
Package: T&R | MOQ: 500 | MPQ: 2500

MSP430F417IPMR / The MSP430F417IPMR is an ultra-low-power 16-bit microcontroller from the MSP430 family, designed for energy-efficient embedded applications. It features 32KB of Flash memory and 2KB of RAM, operating at a maximum clock frequency of 8 MHz. The device supports a supply voltage range of 1.8V to 3.6V and provides extremely low power consumption, with active mode current around 280 µA at 1 MHz and standby current in the microampere range. It includes multiple peripherals such as USART, SPI, timers, watchdog timer, and a high-resolution sigma-delta ADC (SD16_A) suitable for precision measurement applications. The MCU also integrates a built-in LCD driver capable of driving up to 160 segments, making it ideal for display-based applications. It offers flexible clock system options, low-power modes (LPM0–LPM4), and fast wake-up times. Operating temperature range is -40°C to +85°C, and the LQFP-64 package allows high pin-count integration, making it suitable for metering, industrial control, portable devices, and battery-powered applications.
MSP430F417IPMR

Description: The MSP430F417IPMR is an ultra-low-power 16-bit microcontroller from the MSP430 family, de ...
Package: T&R | MOQ: 1000 | MPQ: 1000

PIC18F46K22-I/PT / The PIC18F46K22-I/PT is a high-performance 8-bit microcontroller from the PIC18 family, featuring 64KB Flash program memory, 3896 bytes SRAM, and 1024 bytes EEPROM for flexible embedded applications. It operates at a maximum clock frequency of 64 MHz using an internal PLL and supports a wide supply voltage range of 1.8V to 5.5V. The device includes 36 programmable I/O pins and a rich set of peripherals such as multiple USART, SPI, and I2C interfaces, along with a 10-bit ADC with up to 28 channels, timers, PWM modules, comparator modules, and watchdog timer. It features low power consumption with nanoWatt XLP technology, offering various power-saving modes and typical active current around 1.5 mA at 16 MHz. The MCU integrates advanced features like hardware multiplier, extended instruction set, and interrupt priority levels for efficient processing. Operating temperature range is -40°C to +85°C, and the TQFP-44 package enables compact and high-density PCB design, making it suitable for industrial control, consumer electronics, communication systems, and embedded applications.
PIC18F46K22-I/PT

Description: The PIC18F46K22-I/PT is a high-performance 8-bit microcontroller from the PIC18 family, fe ...
Package: TRAY | MOQ: 320 | MPQ: 160

AT89C55WD-24PU / The AT89C55WD-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 20KB of Flash program memory and 256 bytes of internal RAM, designed for general-purpose embedded control applications. It operates at a maximum clock frequency of 24 MHz and supports a supply voltage range of 2.7V to 5.5V. The device includes 32 programmable I/O lines, three 16-bit timers/counters, a full-duplex UART serial interface, and on-chip watchdog timer for system reliability. It supports in-system programmable (ISP) Flash memory with endurance up to 1000 write/erase cycles and data retention up to 10 years. Typical operating current is around 25 mA at 5V and 12 MHz, with low-power idle and power-down modes available. Operating temperature range is -40°C to +85°C, and the DIP-40 package makes it suitable for prototyping, industrial control, and embedded system development applications.
AT89C55WD-24PU

Description: The AT89C55WD-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 2 ...
Package: TUBE | MOQ: 450 | MPQ: 10

AT89C51CC03UA-SLSUM / The AT89C51CC03UA-SLSUM is an advanced 8-bit microcontroller based on the 8051 architecture, integrating a full CAN 2.0A/B controller for industrial and automotive communication systems. It features 64KB Flash program memory, 2.25KB SRAM, and 2KB EEPROM, enabling robust embedded application development . The device operates at clock frequencies up to 40 MHz (up to 60 MHz in specific modes) and supports a supply voltage range of 3.0V to 5.5V . It includes 36 programmable I/O pins, three 16-bit timers, an 8-channel 10-bit ADC, SPI, UART, and CAN communication interfaces, along with PWM and watchdog timer peripherals . The MCU offers high integration with up to 15 CAN message objects, hardware filtering, and timestamping capabilities, ensuring efficient real-time communication . Operating temperature range is -40°C to +85°C, and the PLCC-44 package supports compact surface-mount designs, making it suitable for automotive control, industrial automation, and embedded networking applications.
AT89C51CC03UA-SLSUM

Description: The AT89C51CC03UA-SLSUM is an advanced 8-bit microcontroller based on the 8051 architectur ...
Package: TUBE | MOQ: 540 | MPQ: 27

AT89C51CC02UA-SISUM / The AT89C51CC02UA-SISUM is an enhanced 8-bit microcontroller based on the 8051 core, integrating a CAN 2.0A/B controller for automotive and industrial communication applications. It operates at a maximum clock frequency of 40 MHz and features 16KB Flash program memory, 512 bytes RAM, and 2KB EEPROM for data storage . The device supports a supply voltage range of 3.0V to 5.5V and includes up to 20 programmable I/O pins, three 16-bit timers, and an 8-channel 10-bit ADC for analog signal acquisition . It provides communication interfaces including CAN bus and UART/USART, along with peripherals such as PWM, watchdog timer, and power-on reset circuitry . Typical operating temperature range is -40°C to +85°C, and it features low-power operation modes. Packaged in PLCC-28, it is suitable for automotive control systems, industrial automation, and embedded networked applications requiring reliable CAN communication.
AT89C51CC02UA-SISUM

Description: The AT89C51CC02UA-SISUM is an enhanced 8-bit microcontroller based on the 8051 core, integ ...
Package: TUBE | MOQ: 380 | MPQ: 38

AT89C5115-RATUM / The AT89C5115-RATUM is an 8-bit microcontroller based on the enhanced 8051 core, integrating a full-speed USB 2.0 device controller for embedded communication applications. It features 16KB Flash program memory and 512 bytes of internal RAM, operating at a maximum clock frequency of 48 MHz with an internal PLL for USB functionality. The device operates with a supply voltage range of 3.0V to 5.5V and supports USB data transfer rates up to 12 Mbps. It includes multiple peripherals such as UART, SPI interface, timers/counters, programmable I/O ports, watchdog timer, and interrupt controller. The microcontroller supports in-system programming (ISP) and in-application programming (IAP), with low power consumption modes including idle and power-down. Typical operating current is around 25 mA. Operating temperature range is -40°C to +85°C, and the TQFP-64 package allows high pin-count integration, making it suitable for USB devices, embedded control systems, and industrial communication applications.
AT89C5115-RATUM

Description: The AT89C5115-RATUM is an 8-bit microcontroller based on the enhanced 8051 core, integrati ...
Package: TRAY | MOQ: 250 | MPQ: 250

AT89C2051-24PU / The AT89C2051-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 2KB of Flash program memory and 128 bytes of internal RAM. It operates at a maximum clock frequency of 24 MHz and supports a wide supply voltage range of 2.7V to 6.0V. The device includes 15 programmable I/O lines, two 16-bit timers/counters, a full-duplex UART serial interface, and an on-chip analog comparator. It provides low power operation with idle and power-down modes, and typical operating current around 20 mA at 5V and 12 MHz. The microcontroller supports ISP programming and offers high endurance Flash memory with up to 1000 write/erase cycles. Operating temperature range is -40°C to +85°C, and the DIP-20 package makes it suitable for prototyping, embedded control systems, industrial applications, and educational development projects.
AT89C2051-24PU

Description: The AT89C2051-24PU is an 8-bit microcontroller based on the 8051 architecture, featuring 2 ...
Package: TUBE | MOQ: 720 | MPQ: 18

IRF7240TRPBF / The IRF7240TRPBF is a P-channel HEXFET® power MOSFET designed for high-efficiency power management and load switching applications. It features a drain-source voltage (VDS) of -40V and continuous drain current up to -10.5A, with very low on-resistance of approximately 15 mΩ at VGS = -10V, enabling minimal conduction losses and high efficiency . The device supports gate-source voltage up to ±20V and has a threshold voltage of around -1V to -3V, allowing logic-level operation. It offers typical gate charge of approximately 73 nC and power dissipation up to 2.5W, with fast switching performance suitable for high-frequency applications . The MOSFET operates over a wide temperature range of -55°C to +150°C and utilizes an optimized SOIC-8 package for improved thermal performance and compact PCB layout . It is widely used in battery management systems, DC-DC converters, and general power switching applications.
IRF7240TRPBF

Description: The IRF7240TRPBF is a P-channel HEXFET® power MOSFET designed for high-efficiency power m ...
Package: T&R | MOQ: 4000 | MPQ: 4000

SI4401FDY-T1-GE3 / The SI4401FDY-T1-GE3 is a P-channel TrenchFET® Gen III power MOSFET designed for high-efficiency switching and load management applications. It features a drain-source voltage (VDS) of -40V and continuous drain current up to -9.9A (TA) and -14A (TC), with low on-resistance of approximately 11.8 mΩ typical and 14.2 mΩ max at VGS = -10V, ensuring minimal conduction losses. The device supports gate-source voltage up to ±20V and has a threshold voltage range of approximately -1V to -2.3V, allowing logic-level drive compatibility. It offers fast switching performance with total gate charge around 66–100 nC and input capacitance approximately 4000 pF. Maximum power dissipation is about 2.5W (TA) to 5W (TC), and it operates over a wide temperature range from -55°C to +150°C. Packaged in SOIC-8, it is suitable for battery management, DC-DC converters, load switching, and power control circuits.
SI4401FDY-T1-GE3

Description: The SI4401FDY-T1-GE3 is a P-channel TrenchFET® Gen III power MOSFET designed for high-eff ...
Package: T&R | MOQ: 2500 | MPQ: 2500

FDS4435BZ / The FDS4435BZ is a P-channel enhancement-mode PowerTrench MOSFET designed for high-efficiency power management and load switching applications. It features a drain-source voltage (VDS) of -30V and continuous drain current of up to -8.8A, with very low on-resistance of approximately 20 mΩ at VGS = -10V and 35 mΩ at VGS = -4.5V, ensuring low conduction losses. The device supports a wide gate-source voltage range of ±25V and has a threshold voltage around -1V to -3V. It offers fast switching performance with gate charge around 40 nC and optimized trench technology for reduced switching losses. Maximum power dissipation is approximately 2.5W, and it operates over a temperature range of -55°C to +150°C . Packaged in SOIC-8, it is ideal for battery-powered systems, DC-DC converters, notebook power management, and load switching applications.
FDS4435BZ

Description: The FDS4435BZ is a P-channel enhancement-mode PowerTrench MOSFET designed for high-efficie ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MDS3652URH / Single P-Channel Trench MOSFET, -30V, -11A, 17mOhm, MDS3652, Magnachip
MDS3652URH

Description: Single P-Channel Trench MOSFET, -30V, -11A, 17mOhm, MDS3652, Magnachip ...
Package: T&R | MOQ: 3000 | MPQ: 3000

AO4882 / The AO4882 is a dual N-channel enhancement-mode power MOSFET designed using advanced trench technology for high efficiency and low switching losses. It features a drain-source voltage (VDS) of 40V and continuous drain current up to 8A per channel, with low on-resistance of typically 19 mΩ at VGS = 10V and 27 mΩ at VGS = 4.5V, enabling efficient power handling. The device supports gate-source voltage up to ±20V and has a low threshold voltage range of approximately 1.4V to 2.4V, making it suitable for logic-level applications. It offers fast switching performance with low gate charge (~6.5 nC at 10V) and low input capacitance (~415 pF), ensuring high-speed operation. Power dissipation is approximately 2W, and it operates over a wide temperature range of -55°C to +150°C. Packaged in SOIC-8, it integrates two MOSFETs in a compact footprint, making it ideal for DC-DC converters, load switching, battery management, and power control applications.
AO4882

Description: The AO4882 is a dual N-channel enhancement-mode power MOSFET designed using advanced trenc ...
Package: T&R | MOQ: 3000 | MPQ: 3000

AO4459 / The AO4459 is a P-channel enhancement-mode power MOSFET designed for load switching and power management applications, utilizing advanced trench technology for low on-resistance and high efficiency. It features a drain-source voltage (VDS) of -30V and continuous drain current of up to -6.5A, with low RDS(on) typically below 46 mΩ at VGS = -10V, minimizing conduction losses. The device supports gate-source voltage up to ±20V and has a threshold voltage around -1V to -2.4V, enabling logic-level operation. It offers fast switching characteristics with low gate charge and rise time around 5–10 ns, making it suitable for high-frequency switching. Power dissipation is approximately 3.1W, and it operates over a wide temperature range from -55°C to +150°C. Packaged in SOIC-8, it is ideal for battery protection, load switching, DC-DC converters, and portable power applications.
AO4459

Description: The AO4459 is a P-channel enhancement-mode power MOSFET designed for load switching and po ...
Package: T&R | MOQ: 3000 | MPQ: 3000

DMN2029USD-13 / The DMN2029USD-13 is a dual N-channel enhancement-mode power MOSFET designed for high-efficiency switching and power management applications. It features a drain-source voltage (VDS) of 20V and continuous drain current of up to 5.8A per channel, with low on-resistance of approximately 25 mΩ at VGS = 4.5V, enabling reduced conduction losses. The device supports gate-source voltage up to ±8V and has a low threshold voltage around 1.5V, making it suitable for logic-level drive applications. It offers fast switching performance with typical gate charge around 10–18 nC and input capacitance approximately 1170 pF . The maximum power dissipation is about 1.2W, and it operates over a wide temperature range from -55°C to +150°C . Packaged in SOIC-8, it integrates two MOSFETs in a compact footprint, making it ideal for DC-DC converters, load switching, battery management, and power control circuits.
DMN2029USD-13

Description: The DMN2029USD-13 is a dual N-channel enhancement-mode power MOSFET designed for high-effi ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ATMEGA328P-AU / AVR AVR® ATmega Microcontroller IC 8-Bit 20MHz 32KB (16K x 16) FLASH 32-TQFP (7x7)
ATMEGA328P-AU

Description: AVR AVR® ATmega Microcontroller IC 8-Bit 20MHz 32KB (16K x 16) FLASH 32-TQFP (7x7) ...
Package: T&R | MOQ: 2000 | MPQ: 2000

AT24C512C-SSHD-B / The AT24C512C-SSHD-B is a 512Kbit non-volatile serial EEPROM organized as 65,536 x 8 bits, featuring a 2-wire I2C-compatible interface with clock frequency up to 1 MHz. It operates over a supply voltage range of 2.5V to 5.5V and provides fast access time of approximately 550 ns with a maximum write cycle time of 5 ms. The device supports 128-byte page write operations and allows up to eight devices on the same I2C bus using address pins. It offers high endurance of up to 1 million write cycles and data retention up to 100 years, with low standby current in the microampere range. The IC includes hardware write-protect functionality and operates over a temperature range of -40°C to +85°C. Packaged in SOIC-8, it is suitable for industrial control, embedded systems, configuration storage, and data logging applications.
AT24C512C-SSHD-B

Description: The AT24C512C-SSHD-B is a 512Kbit non-volatile serial EEPROM organized as 65,536 x 8 bits, ...
Package: TUBE | MOQ: 1000 | MPQ: 100

AT24C32D-SSHM-T / The AT24C32D-SSHM-T is a 32Kbit non-volatile EEPROM memory organized as 4096 x 8 bits, featuring a standard I2C-compatible 2-wire serial interface with clock frequency up to 1 MHz. It operates over a wide supply voltage range of 1.7V to 5.5V and provides a fast access time of approximately 550 ns with a typical write cycle time of 5 ms. The device supports page write operations, low standby current in the microampere range, and high endurance of up to 1 million write cycles with data retention exceeding 100 years. It includes hardware write protection and supports multiple device addressing on the same bus. Operating temperature range is -40°C to +85°C, and the SOIC-8 package enables compact surface-mount integration, making it suitable for data logging, configuration storage, industrial control, and embedded system applications.
AT24C32D-SSHM-T

Description: The AT24C32D-SSHM-T is a 32Kbit non-volatile EEPROM memory organized as 4096 x 8 bits, fea ...
Package: T&R | MOQ: 4000 | MPQ: 4000

AMC1200BDWVR / The AMC1200BDWVR is a precision isolation amplifier designed for current sensing and voltage measurement in high-voltage environments, featuring galvanic isolation up to 4250 Vpeak. It operates with a differential input voltage range of ±250 mV optimized for shunt resistor applications and provides a fixed gain of 8 with ±0.5% accuracy. The device supports a bandwidth of approximately 100 kHz and offers high common-mode rejection ratio of about 108 dB, ensuring accurate signal transmission in noisy environments. It operates with supply voltages of 2.7V to 5.5V and consumes typical supply current around 5.4 mA. The amplifier features low offset voltage (~200 µV), low nonlinearity (0.075% max), and high transient immunity of at least 10 kV/µs. Operating temperature range is -40°C to +105°C, and the wide-body SOIC-8 package ensures reinforced isolation spacing, making it suitable for motor control, power inverters, and industrial current sensing applications.
AMC1200BDWVR

Description: The AMC1200BDWVR is a precision isolation amplifier designed for current sensing and volta ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ALF1P05 / The ALF1P05 is a general-purpose power relay featuring a single-pole single-throw normally open (SPST-NO, 1 Form A) contact configuration, designed for high-current switching applications. It operates with a 5V DC coil voltage, drawing approximately 180 mA with a coil resistance of 27.8 Ω and coil power around 900 mW. The relay supports a contact rating of 20 A at 250 VAC with a maximum switching current up to 25 A and switching power up to 6250 VA . It offers low contact resistance (≤100 mΩ), high insulation resistance (≥1000 MΩ), and dielectric strength up to 5000 Vrms between coil and contacts. Typical operate and release times are 20 ms and 15 ms respectively. Designed for operation in -40°C to +60°C environments, it is ideal for compressors, inverters, and home appliance applications such as air conditioners and refrigerators .
ALF1P05

Description: The ALF1P05 is a general-purpose power relay featuring a single-pole single-throw normally ...
Package: TRAY | MOQ: 2000 | MPQ: 50

AIAP-01-390K-T / The AIAP-01-390K-T is a wirewound fixed inductor designed for general-purpose power applications, offering an inductance of 39µH with a tolerance of ±10%. It supports a maximum rated current of 880 mA and features a low DC resistance of approximately 260 mΩ, ensuring efficient current handling and reduced power loss. The inductor has a self-resonant frequency of around 7.1 MHz and operates over a wide temperature range of -40°C to +105°C. It is constructed as an unshielded axial through-hole component, providing stable inductance characteristics and mechanical robustness. The compact form factor (approximately 9.14 mm length, 3.3 mm diameter) makes it suitable for power filtering, energy storage, and DC-DC converter applications.
AIAP-01-390K-T

Description: The AIAP-01-390K-T is a wirewound fixed inductor designed for general-purpose power applic ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ADXL335BCPZ / The ADXL335BCPZ is a small, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs, designed to measure acceleration in the ±3 g range. It operates over a supply voltage range of 1.8V to 3.6V and features low current consumption of approximately 350 µA. The device provides ratiometric analog outputs for X, Y, and Z axes, with sensitivity typically around 300 mV/g and bandwidth configurable from 0.5 Hz up to 1600 Hz (X/Y) and 550 Hz (Z) using external capacitors. It offers low noise performance (~150 µg/√Hz), high shock survivability (up to 10,000 g), and fast response time. The sensor operates over a temperature range of -40°C to +85°C and is housed in a compact 4x4 mm LFCSP-16 package, making it ideal for motion detection, tilt sensing, vibration monitoring, and portable device applications.
ADXL335BCPZ

Description: The ADXL335BCPZ is a small, low power, complete 3-axis accelerometer with signal condition ...
Package: TRAY | MOQ: 302 | MPQ: 151

ADUM1201ARZ / The ADUM1201ARZ is a dual-channel digital isolator based on iCoupler® technology, providing galvanic isolation up to 2500 Vrms between input and output. It supports data rates up to 25 Mbps and operates over a supply voltage range of 2.7V to 5.5V on both sides, enabling flexible interfacing. The device features low propagation delay of approximately 45 ns, low pulse width distortion (<5 ns), and high common-mode transient immunity exceeding 25 kV/µs. Typical supply current is around 1.5 mA per channel at 1 Mbps. It includes two independent channels with configurable direction (1 forward, 1 reverse), and operates over a temperature range of -40°C to +105°C. The SOIC-8 package ensures compact integration, making it suitable for industrial communication, SPI/I2C isolation, and data interface protection applications.
ADUM1201ARZ

Description: The ADUM1201ARZ is a dual-channel digital isolator based on iCoupler® technology, providi ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADS8325IDGKT / The ADS8325IDGKT is a high-speed 16-bit successive approximation register (SAR) analog-to-digital converter designed for precision data acquisition systems. It operates over a supply voltage range of 2.7V to 5.5V and supports a maximum sampling rate of 100 kSPS with a single input channel. The device features differential or pseudo-differential input configuration and uses an external reference voltage up to VDD, enabling flexible signal scaling. It provides a SPI/SSI-compatible serial interface and achieves excellent linearity of ±1.5 LSB typical with very low noise (~3 LSB p-p). Power consumption is approximately 4.5 mW at full speed and less than 1 mW at 10 kSPS, making it suitable for low-power applications. Operating temperature range is -40°C to +85°C, and the compact VSSOP-8 package allows efficient PCB integration in portable instrumentation, remote sensing, and industrial data acquisition systems.
ADS8325IDGKT

Description: The ADS8325IDGKT is a high-speed 16-bit successive approximation register (SAR) analog-to- ...
Package: T&R | MOQ: 250 | MPQ: 250

ADS8321E/250 / The ADS8321E/250 is a 16-bit successive approximation register (SAR) analog-to-digital converter designed for high-speed and low-power data acquisition applications. It operates with a single supply voltage of 4.75V to 5.25V and supports a maximum sampling rate of 100 kSPS. The device features differential, pseudo-differential, and single-ended input configurations with an external reference voltage range from 0.5V to VCC/2. It provides a SPI/SSI-compatible serial interface for data output and achieves low power consumption of approximately 4.5 mW at full speed and less than 1 mW at 10 kSPS, with standby current as low as 3 µA. The ADC offers high precision with low noise and excellent linearity, operating over a temperature range of -40°C to +85°C, and is housed in a compact VSSOP-8 package suitable for portable instrumentation, industrial control, and remote data acquisition systems.
ADS8321E/250

Description: The ADS8321E/250 is a 16-bit successive approximation register (SAR) analog-to-digital con ...
Package: T&R | MOQ: 250 | MPQ: 250

ADS1281IPWR / The ADS1281IPWR is a high-performance 24-bit delta-sigma analog-to-digital converter optimized for high-resolution and low-noise measurement applications. It operates with a supply voltage range of 2.7V to 5.25V for analog supply and 1.65V to 3.6V for digital supply, supporting flexible system integration. The device features a programmable data rate up to 4 kSPS with exceptional noise performance (as low as 17 nV/√Hz input-referred noise) and dynamic range up to 130 dB. It supports differential input signals with programmable gain amplifier (PGA) up to 64, allowing precise amplification of low-level signals. The ADC includes a SPI-compatible serial interface, onboard digital filtering, and internal reference options. Typical power consumption is around 5 mW. Operating temperature range is -40°C to +85°C, and the TSSOP-28 package enables compact and reliable PCB implementation for seismic, industrial sensing, and precision data acquisition systems.
ADS1281IPWR

Description: The ADS1281IPWR is a high-performance 24-bit delta-sigma analog-to-digital converter opti ...
Package: t&r | MOQ: 2000 | MPQ: 2000

ADS1251U / The ADS1251U is a high-resolution 24-bit delta-sigma analog-to-digital converter designed for precision measurement applications. It operates with a supply voltage of 5V and supports a differential analog input range of ±2.5V, delivering low noise and high accuracy performance. The device provides a programmable output data rate up to 20 kSPS with excellent linearity and low total harmonic distortion. It features low input-referred noise (typically <1 µV RMS), high signal-to-noise ratio (>100 dB), and integral nonlinearity of ±0.0015% typical. The ADC uses a simple serial interface for data output and requires minimal external components. Operating temperature range is -40°C to +85°C, and the SOIC-8 package enables compact integration in industrial instrumentation, weigh scales, and sensor signal acquisition systems.
ADS1251U

Description: The ADS1251U is a high-resolution 24-bit delta-sigma analog-to-digital converter designed ...
Package: TUBE | MOQ: 450 | MPQ: 75

ADM3251EARWZ-REEL / The ADM3251EARWZ-REEL is a highly integrated <strong>isolated RS-232 transceiver</strong> from <strong>Analog Devices</strong>, combining signal isolation, data communication, and isolated power generation within a single compact device. Built with the companys advanced <strong>iCoupler® and IsoPower® technologies</strong>, it simplifies isolated serial communication designs while reducing external component requirements. <br><br>This device integrates a complete <strong>single-channel RS-232 transceiver</strong> together with galvanic isolation and an isolated DC-DC power converter, eliminating the need for separate optocouplers, transformers, or isolated power supplies. The result is a compact and highly reliable solution for industrial and communication systems. <br><br>The ADM3251EARWZ-REEL provides <strong>2.5kV RMS isolation voltage</strong>, helping protect sensitive electronics from ground loops, high-voltage transients, and electrical noise. Its isolation barrier enables safe communication between equipment operating at different ground potentials. <br><br>The transceiver supports data rates up to <strong>460kbps</strong>, making it suitable for a wide range of serial communication applications. It is fully compliant with RS-232 voltage requirements and provides reliable data transmission over standard serial interfaces. <br><br>Operating from a single <strong>5V supply</strong>, the integrated IsoPower® technology generates the isolated power required across the isolation barrier, significantly simplifying PCB layout and reducing overall system cost. The device also offers excellent common-mode transient immunity for stable operation in electrically noisy environments. <br><br>Packaged in a compact <strong>28-pin wide-body SOIC package</strong>, the ADM3251EARWZ-REEL provides a space-efficient solution while meeting stringent industrial isolation requirements. <br><br>The <strong>ADM3251EARWZ-REEL</strong> is widely used in <strong>industrial automation systems, PLCs, process control equipment, instrumentation, medical devices, industrial PCs, communication gateways, test and measurement equipment, and isolated serial communication interfaces</strong>, where reliable RS-232 connectivity and galvanic isolation are essential.
ADM3251EARWZ-REEL

Description: The ADM3251EARWZ-REEL is a highly integrated isolated RS-232 transceiver ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADM2687EBRIZ / The ADM2687EBRIZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver utilizing iCoupler® and isoPower® technology, providing galvanic isolation up to 5000 Vrms and eliminating the need for an external isolated power supply. It operates from a single 3.3V or 5V supply and supports data rates up to 500 kbps, with typical propagation delay around 200–700 ns. The device features high common-mode transient immunity of at least 25 kV/µs and robust ±15 kV ESD protection, ensuring reliable operation in harsh industrial environments. It integrates one differential driver and one receiver with half-duplex communication capability, and includes built-in protections such as current limiting and thermal shutdown. Typical supply current is around 55 mA, and the device operates over a temperature range of -40°C to +85°C. The wide-body SOIC-16 package provides reinforced insulation spacing, making it suitable for industrial automation, fieldbus networks, and isolated communication systems.
ADM2687EBRIZ

Description: The ADM2687EBRIZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver ...
Package: T&R | MOQ: 400 | MPQ: 400

ADM2483BRWZ-REEL / The ADM2483BRWZ-REEL is a half-duplex isolated RS-485/RS-422 transceiver integrating iCoupler® magnetic isolation technology, providing galvanic isolation up to 2500 Vrms. It supports data rates up to 500 kbps and operates with supply voltages from 2.7V to 5.5V on the logic side and 5V on the bus side. The device features high common-mode transient immunity greater than 25 kV/µs, low operating current of approximately 2.5 mA, and propagation delay around 600–620 ns. It includes one driver and one receiver with bidirectional communication capability and supports up to 256 nodes on the bus. The transceiver offers fail-safe receiver inputs, slew-rate limited outputs for reduced EMI, and thermal shutdown protection. Operating temperature range is -40°C to +85°C, and the wide-body SOIC-16 package ensures compliance with isolation spacing requirements, making it suitable for industrial automation, fieldbus systems, and isolated communication interfaces.
ADM2483BRWZ-REEL

Description: The ADM2483BRWZ-REEL is a half-duplex isolated RS-485/RS-422 transceiver integrating iCoup ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADM2481BRWZ-RL7 / The ADM2481BRWZ-RL7 is a half-duplex isolated RS-485/RS-422 transceiver utilizing iCoupler® magnetic isolation technology, providing galvanic isolation up to 2500 Vrms. It supports data rates up to 500 kbps and operates with supply voltages from 3.0V to 5.5V on the logic side and typically 5V on the bus side. The device integrates one driver and one receiver with differential I/O, featuring slew-rate limited outputs to reduce EMI and reflections. It offers high common-mode transient immunity of at least 25 kV/µs and input impedance around 96 kΩ, allowing up to 256 nodes on the bus. The transceiver includes fail-safe receiver operation, low propagation delay (~250 ns), and ESD protection (±2 kV HBM). Operating temperature range is -40°C to +85°C, and the wide-body SOIC-16 package ensures compliance with isolation spacing requirements, making it suitable for industrial communication, building automation, and isolated fieldbus systems.
ADM2481BRWZ-RL7

Description: The ADM2481BRWZ-RL7 is a half-duplex isolated RS-485/RS-422 transceiver utilizing iCoupler ...
Package: T&R | MOQ: 400 | MPQ: 400

ADM101EARMZ-REEL7 / Craft Port Tiny RS-232 Transceiver for Portable Applications 460 kbit/s Transmission Rate, Single 5 V Power Supply, Compatible with RS-232, Input/Output Levels, 0.1 μF Charge Pump Capacitors, One Driver and One Receiver, On-Board DC-DC Converter, ±4.2 V Output Swing with 5 V Supply, Low Power BiCMOS: 500 μA I CC, Ultralow Power (1 μA) Shutdown Mode
ADM101EARMZ-REEL7

Description: Craft Port Tiny RS-232 Transceiver for Portable Applications 460 kbit/s Transmission Rate, ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD8608ARZ-REEL7 / The AD8608ARZ-REEL7 is a quad precision CMOS operational amplifier featuring rail-to-rail input and output capability, optimized for low noise and high accuracy applications. It operates over a supply voltage range of 2.7V to 5.5V and provides a gain bandwidth product of 10 MHz with a slew rate of 5 V/µs. The device offers ultra-low input bias current of approximately 1 pA and low input offset voltage typically around 20–80 µV, ensuring high precision signal amplification. It delivers output current up to 80 mA per channel and features low noise density of about 8 nV/√Hz with high CMRR (~100 dB). The amplifier consumes approximately 1 mA per channel (≈4.8 mA total) and operates over a temperature range of -40°C to +125°C. Designed using DigiTrim® technology, it ensures excellent DC accuracy and stability, making it suitable for sensor interfaces, instrumentation, photodiode amplification, and low-noise signal conditioning applications.
AD8608ARZ-REEL7

Description: The AD8608ARZ-REEL7 is a quad precision CMOS operational amplifier featuring rail-to-rail ...
Package: T&R | MOQ: 1000 | MPQ: 1000

JN5169/001Z / The JN5169/001Z is a highly integrated ultra-low power 32-bit RISC wireless microcontroller with an embedded IEEE 802.15.4 compliant 2.4 GHz RF transceiver, designed for Zigbee and IoT applications. It operates over a supply voltage range of 2.0V to 3.6V and supports a maximum CPU clock frequency of 32 MHz. The device integrates 512 KB Flash, 32 KB RAM, and 4 KB EEPROM, enabling complex wireless applications with OTA update capability. It provides RF output power up to +10 dBm, receiver sensitivity of approximately -96.5 dBm, and data rates up to 400 kbps. Typical current consumption is 13–15 mA in receive mode and 14–23 mA in transmit mode. The MCU includes multiple peripherals such as I2C, SPI, UART, JTAG, 10-bit ADC, PWM, and up to 20 GPIOs. Operating temperature range is -40°C to +125°C, and the compact HVQFN-40 package makes it suitable for low-power wireless networks, smart home systems, industrial IoT, and Zigbee-based communication devices.
JN5169/001Z

Description: The JN5169/001Z is a highly integrated ultra-low power 32-bit RISC wireless microcontrolle ...
Package: T&R | MOQ: 1000 | MPQ: 1000

LNK364DN-TL / The LNK364DN-TL is a highly integrated off-line switcher IC from the LinkSwitch-XT family, designed for low-power AC-DC conversion applications. It integrates a 700V power MOSFET, oscillator, ON/OFF control circuitry, and protection features in a single device, enabling compact flyback power supply designs. The device operates over a universal input range of 85VAC to 265VAC and delivers output power up to approximately 6W (85–265VAC) or 9W (230VAC). It features a switching frequency of around 132 kHz, maximum duty cycle of 60%, and output current capability of approximately 330 mA. The IC includes built-in protections such as current limiting, thermal shutdown, short-circuit protection, and auto-restart functionality. With low standby power consumption (<300 mW) and high efficiency, it is ideal for chargers, adapters, and small appliance power supplies. The SO-8C package allows compact PCB layout and efficient thermal performance for cost-sensitive and energy-efficient designs.
LNK364DN-TL

Description: The LNK364DN-TL is a highly integrated off-line switcher IC from the LinkSwitch-XT family, ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LNK364PN / Energy Efficient, Low Power Off-Line Switcher IC Converter Offline Flyback Topology 132kHz 8-PDIP-B Isolated
LNK364PN

Description: Energy Efficient, Low Power Off-Line Switcher IC Converter Offline Flyback Topology 132kHz ...
Package: TUBE | MOQ: 500 | MPQ: 50

AD8223ARZ / The AD8223ARZ is a low-power, rail-to-rail instrumentation amplifier designed for precision signal conditioning in low-voltage systems. It operates over a wide supply voltage range from 2.2V to 36V (single supply) and consumes very low quiescent current of approximately 60 µA, making it suitable for battery-powered applications. The device offers gain programmable from 1 to 1000 using a single external resistor, with input offset voltage typically around 25 µV and offset drift of 0.3 µV/°C. It provides high common-mode rejection ratio (CMRR) up to 100 dB, low input bias current (~2 nA), and rail-to-rail output swing. The amplifier has a bandwidth of approximately 1 MHz at unity gain and a slew rate of 0.8 V/µs. Operating temperature range is -40°C to +125°C, and the SOIC-8 package makes it suitable for sensor interfaces, medical instrumentation, and portable measurement systems.
AD8223ARZ

Description: The AD8223ARZ is a low-power, rail-to-rail instrumentation amplifier designed for precisio ...
Package: TUBE | MOQ: 392 | MPQ: 98

AD8022ARZ / The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise.
AD8022ARZ

Description: The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplif ...
Package: TUBE | MOQ: 392 | MPQ: 98

AD7791BRMZ / The AD7791BRMZ is a low-power, high-resolution 24-bit sigma-delta analog-to-digital converter designed for precision measurement applications. It operates over a supply voltage range of 2.7V to 5.25V and integrates a programmable gain amplifier (PGA) with selectable gains up to 128, allowing accurate measurement of low-level signals. The device supports output data rates up to 120 Hz with effective resolution up to 23 bits and input-referred noise as low as 40 nV RMS. It features differential input channels, a SPI-compatible serial interface, and low power consumption of approximately 380 µA in active mode and less than 1 µA in standby mode. The ADC offers excellent linearity with ±0.0015% typical INL and includes internal clocking and digital filtering. Operating temperature range is -40°C to +105°C, and the compact MSOP-10 package makes it suitable for weigh scales, pressure measurement, industrial instrumentation, and sensor interface applications.
AD7791BRMZ

Description: The AD7791BRMZ is a low-power, high-resolution 24-bit sigma-delta analog-to-digital conver ...
Package: T&R | MOQ: 2500 | MPQ: 2500

AD736JRZ-R7 / The AD736JRZ-R7 is a low-power, precision true RMS-to-DC converter designed to accurately convert AC signals into proportional DC output. It operates over a wide supply voltage range from +2.8V, −3.2V up to ±16.5V and consumes low supply current typically around 160–200 µA . The device supports a full-scale input range of approximately 200 mV RMS (expandable with external attenuators) and offers high input impedance up to 10¹² Ω with very low input bias current (~25 pA) . It provides high accuracy with error as low as ±0.3 mV ±0.3% of reading and maintains performance across various waveform types including distorted or non-sinusoidal signals . The converter features bandwidth exceeding 10 kHz for 1% error and supports crest factors up to 5. With an internal output buffer, low power consumption (~1 mW), and operating temperature range up to industrial grades, it is ideal for precision measurement, instrumentation, multimeters, and signal processing applications.
AD736JRZ-R7

Description: The AD736JRZ-R7 is a low-power, precision true RMS-to-DC converter designed to accurately ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD621ARZ-R7 / The AD621ARZ-R7 is a low-cost, low-power instrumentation amplifier designed for high-accuracy signal conditioning with gain programmable via external resistor or pin-strapping (G = 10 or 100). It operates over a wide supply voltage range of ±2.3V to ±18V (4.6V to 36V single supply) and consumes low supply current of approximately 900 µA to 1.3 mA. The device features low input offset voltage around 35–75 µV, input bias current of about 500 pA, and high common-mode rejection ratio (CMRR) up to 110–130 dB, ensuring accurate amplification of small differential signals. It provides a bandwidth of approximately 800 kHz at gain of 10 and slew rate of 1.2 V/µs, with output current capability up to 18 mA per channel . The amplifier also offers low noise performance (~9 nV/√Hz) and high input impedance (~10 GΩ), making it suitable for precision applications such as strain gauges, medical instrumentation, and industrial data acquisition systems.
AD621ARZ-R7

Description: The AD621ARZ-R7 is a low-cost, low-power instrumentation amplifier designed for high-accur ...
Package: T&R | MOQ: 1000 | MPQ: 1000













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |