All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Fuse
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
SSD
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

ADL5561ACPZ-R7 / The ADL5561ACPZ-R7 is a high-performance differential amplifier optimized for RF and IF applications. It offers a -3 dB bandwidth of 2.9 GHz with a low noise density of 2.1 nV/√Hz, making it ideal for driving high-speed ADCs. The amplifier features selectable gain settings of 6 dB, 12 dB, and 15.5 dB, configurable via pin-strapping, with single-ended to differential input/output capability. It operates with a single supply voltage ranging from 3 V to 3.6 V and consumes a typical supply current of 40 mA. The device is housed in a compact 16-lead LFCSP-VQ (3x3 mm) package and is specified for an operating temperature range of -40°C to +85°C.
ADL5561ACPZ-R7

Description: The ADL5561ACPZ-R7 is a high-performance differential amplifier optimized for RF and IF ap ...
Package: T&R | MOQ: 1500 | MPQ: 1500

ADG721BRMZ-REEL7 / The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog Devices, designed for low-voltage, high-speed switching applications. It features a low on-resistance of 4Ω (max) and excellent channel-to-channel matching of 300mΩ (max). The switch operates with a supply voltage range of 1.8V to 5.5V and offers fast switching times with a turn-on time of 14ns (max) and a turn-off time of 6ns (max). With a -3dB bandwidth of 200MHz and low charge injection (2pC), it ensures minimal distortion and high-speed signal routing. The ADG721BRMZ-REEL7 is ideal for use in communication systems, audio/video switching, test equipment, and portable devices, with a temperature range of -40°C to +85°C.
ADG721BRMZ-REEL7

Description: The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog D ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ADAU1761BCPZ-R7 / The ADAU1761BCPZ-R7 is a high-fidelity, low-power audio codec from Analog Devices Inc., designed for portable and embedded audio applications. It integrates a stereo analog-to-digital converter (ADC), stereo digital-to-analog converter (DAC), and a programmable digital signal processor (DSP) in a single package, offering flexibility and high performance for audio processing tasks.
ADAU1761BCPZ-R7

Description: The ADAU1761BCPZ-R7 is a high-fidelity, low-power audio codec from Analog Devices Inc., de ...
Package: T&R | MOQ: 1500 | MPQ: 1500

ADA4051-1ARJZ-R7 / The ADA4051-1ARJZ-R7 is a zero-drift operational amplifier from Analog Devices Inc., offering low power consumption and rail-to-rail input/output capabilities. It is particularly suitable for applications requiring precision and low-voltage operation.
ADA4051-1ARJZ-R7

Description: The ADA4051-1ARJZ-R7 is a zero-drift operational amplifier from Analog Devices Inc., offer ...
Package: T&R | MOQ: 3000 | MPQ: 3000

AD9755ASTZ / The AD9755ASTZ is a high-speed 14-bit digital-to-analog converter (DAC) from Analog Devices, designed for demanding communication and signal generation applications. It belongs to the TxDAC+® family and integrates a high-performance DAC core, voltage reference, and digital interface circuitry in a compact package.<br><br>The device supports ultra-fast update rates of up to 300 MSPS (mega samples per second), making it suitable for high-frequency signal processing and RF applications. It features a dual multiplexed input port architecture, enabling flexible high-speed data interfacing for modern communication systems.<br><br>The AD9755ASTZ uses a current-source architecture with differential outputs, allowing improved noise immunity and high dynamic performance. It delivers excellent spectral purity with high spurious-free dynamic range (SFDR), making it ideal for applications such as digital synthesis, QAM/OFDM modulation, and wireless base stations.<br><br>Operating from a single 3.0V to 3.6V supply, the device offers low power consumption (~155 mW) while maintaining high-speed performance. It also includes an on-chip 1.2V reference and optional PLL for clock multiplication, simplifying system design.<br><br>Housed in a 48-pin LQFP surface-mount package, the AD9755ASTZ is widely used in applications such as wireless communication systems, RF signal generation, instrumentation, digital synthesis, and high-speed data acquisition where precision and speed are critical.
AD9755ASTZ

Description: The AD9755ASTZ is a high-speed 14-bit digital-to-analog converter (DAC) from Analog Device ...
Package: TRAY | MOQ: 420 | MPQ: 7

AD8639ARZ-REEL7 / The AD8639ARZ-REEL7 is a dual-channel, zero-drift operational amplifier from Analog Devices Inc., designed for applications requiring high precision and low noise. It operates with single-supply voltages ranging from 5V to 16V or dual-supply voltages from ±2.5V to ±8V. The amplifier offers rail-to-rail output swing, a gain bandwidth product of 1.5 MHz, and a slew rate of 2 V/µs. It features a low input offset voltage of 3 µV and a low input bias current of 1 pA, making it suitable for applications such as pressure and position sensors, strain gauge amplifiers, medical instrumentation, thermocouple amplifiers, automotive sensors, precision references, and precision current sensing.
AD8639ARZ-REEL7

Description: The AD8639ARZ-REEL7 is a dual-channel, zero-drift operational amplifier from Analog Device ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AD8632ARZ / The AD8632ARZ is a dual-channel, precision operational amplifier from Analog Devices Inc., designed for applications requiring low offset voltage and low input bias current. It operates with a single-supply voltage ranging from 2.7V to 5.5V and features rail-to-rail input and output swings, maximizing dynamic range. The amplifier offers a gain bandwidth product of 1 MHz and a slew rate of 0.1 V/µs, suitable for a variety of sensor and instrumentation applications.
AD8632ARZ

Description: The AD8632ARZ is a dual-channel, precision operational amplifier from Analog Devices Inc., ...
Package: TUBE | MOQ: 490 | MPQ: 98

AD8629ARZ / The AD8629ARZ is a dual-channel, zero-drift operational amplifier from Analog Devices Inc., designed for precision applications requiring low offset voltage and low input bias current. It operates with a single-supply voltage ranging from 2.7V to 5V and features rail-to-rail input and output swings. The amplifier offers a gain bandwidth product of 2.5 MHz and a slew rate of 1 V/µs, making it suitable for various sensor and instrumentation applications.
AD8629ARZ

Description: The AD8629ARZ is a dual-channel, zero-drift operational amplifier from Analog Devices Inc. ...
Package: TUBE | MOQ: 588 | MPQ: 98

AD8619ARZ / The AD8619ARZ is a quad-channel, low-cost micropower CMOS operational amplifier from Analog Devices Inc. It operates on a single-supply voltage ranging from 1.8V to 5.5V, making it suitable for battery-powered applications. This amplifier offers rail-to-rail input and output, a gain bandwidth product of 400 kHz, and a slew rate of 0.1 V/µs. It is housed in a 14-lead SOIC package and operates over an extended temperature range of -40°C to +125°C.
AD8619ARZ

Description: The AD8619ARZ is a quad-channel, low-cost micropower CMOS operational amplifier from Analo ...
Package: TUBE | MOQ: 1120 | MPQ: 56

AD8617ARZ / The AD8617ARZ is a dual-channel, micropower CMOS operational amplifier from Analog Devices Inc. It operates on a single supply voltage ranging from 1.8V to 5.5V, making it suitable for low-voltage applications. This amplifier offers rail-to-rail input and output, a gain bandwidth product of 400 kHz, and a slew rate of 0.1 V/µs. It is housed in an 8-lead SOIC package and operates over an extended temperature range of -40°C to +125°C.
AD8617ARZ

Description: The AD8617ARZ is a dual-channel, micropower CMOS operational amplifier from Analog Devices ...
Package: TUBE | MOQ: 588 | MPQ: 98

AD8606ARZ / The AD8606ARZ is a dual-channel, precision CMOS operational amplifier from Analog Devices Inc. It features low offset voltage, low input bias current, and operates with a single supply voltage ranging from 2.7V to 5.5V. This amplifier offers rail-to-rail input and output, a gain bandwidth product of 10 MHz, and a slew rate of 5 V/µs. Housed in an 8-lead SOIC package, it operates over an extended temperature range of -40°C to +125°C.
AD8606ARZ

Description: The AD8606ARZ is a dual-channel, precision CMOS operational amplifier from Analog Devices ...
Package: TUBE | MOQ: 588 | MPQ: 98

AD8544ARZ / The AD8544ARZ is a quad-channel, general-purpose CMOS operational amplifier from Analog Devices. It operates on a single supply voltage ranging from 2.7V to 5.5V and consumes a low supply current of 45 µA per amplifier, making it ideal for battery-powered applications. This amplifier offers rail-to-rail input and output, a gain bandwidth product of 1 MHz, and a slew rate of 0.92 V/µs. Housed in a 14-lead SOIC package, it operates over an extended temperature range of -40°C to +125°C.
AD8544ARZ

Description: The AD8544ARZ is a quad-channel, general-purpose CMOS operational amplifier from Analog De ...
Package: TUBE | MOQ: 1120 | MPQ: 56

AD8542ARUZ / The AD8542ARUZ is a dual-channel, general-purpose CMOS operational amplifier from Analog Devices. Operating on a single supply voltage ranging from 2.7V to 5.5V, it consumes a low supply current of 45 µA per amplifier, making it ideal for battery-powered applications. This amplifier offers rail-to-rail input and output, a gain bandwidth product of 1 MHz, and a slew rate of 0.92 V/µs. Housed in a 14-lead thin shrink small outline package (TSSOP), it operates over an extended temperature range of -40°C to +125°C.
AD8542ARUZ

Description: The AD8542ARUZ is a dual-channel, general-purpose CMOS operational amplifier from Analog D ...
Package: TUBE | MOQ: 576 | MPQ: 96

AD8541ARTZ-REEL / The AD8541ARTZ-REEL is a single-channel, general-purpose CMOS operational amplifier from Analog Devices. It operates on a single supply voltage ranging from 2.7V to 5.5V and consumes a low supply current of 45 µA per amplifier, making it suitable for battery-powered applications. The amplifier offers rail-to-rail input and output, a gain bandwidth product of 1 MHz, and a slew rate of 0.92 V/µs. It is housed in a SOT-23-5 package and operates over an extended temperature range of -40°C to +125°C.
AD8541ARTZ-REEL

Description: The AD8541ARTZ-REEL is a single-channel, general-purpose CMOS operational amplifier from A ...
Package: T&R | MOQ: 10000 | MPQ: 10000

TPC5180-VS2R / The TPC5180-VS2R is an 18-bit successive approximation register (SAR) analog-to-digital converter (ADC) developed by 3PEAK. It features a fully differential, unipolar input with a range of -VREF to VREF, offering high dynamic range and noise performance, including a typical signal-to-noise ratio (SNR) of 96 dB at 1 kHz and a total harmonic distortion (THD) of -110 dB at 1 kHz. The device operates at a maximum sampling rate of 300 kSPS, supports an external reference voltage between 2.5V and VDD, and utilizes a 3- or 4-wire SPI-compatible interface, with daisy-chain support for multiple device applications. Housed in a compact 10-MSOP package, the TPC5180-VS2R is suitable for applications requiring precise data acquisition, such as medical equipment and automatic test systems.
TPC5180-VS2R

Description: The TPC5180-VS2R is an 18-bit successive approximation register (SAR) analog-to-digital co ...
Package: T&R | MOQ: 3000 | MPQ: 3000

EPC2LI20N / The EPC2LI20N is a high-performance, in-system programmable configuration memory device from Intel, designed for use with SRAM-based FPGAs. Featuring a 1.6Mb memory size organized as 1,695,680 bits, it supports both 3.3V and 5V power supplies, offering flexibility in various applications. The device operates synchronously with a clock frequency of up to 12.5 MHz, ensuring efficient data handling. Packaged in a 20-pin leadless chip carrier (LCC) with J-lead terminals, it is suitable for surface-mount technology (SMT) installations. The EPC2LI20N is RoHS compliant and operates within an industrial temperature range of -40°C to 85°C.
EPC2LI20N

Description: The EPC2LI20N is a high-performance, in-system programmable configuration memory device fr ...
Package: TRAY | MOQ: 196 | MPQ: 196

MCIMX6D7CVT08AD / The MCIMX6D7CVT08AD is a microprocessor from NXPs i.MX6 series, featuring a dual-core ARM Cortex-A9 processor. It operates at a clock speed of 800 MHz and comes in a 624-pin FCBGA package (21x21 mm).
MCIMX6D7CVT08AD

Description: The MCIMX6D7CVT08AD is a microprocessor from NXPs i.MX6 series, featuring a dual-core ARM ...
Package: BULK | MOQ: 12 | MPQ: 6

PIC18F4620-I/PT / The PIC18F4620-I/PT is an 8-bit microcontroller from Microchip Technologys PIC18 series, offering a blend of performance, memory capacity, and peripheral features suitable for a variety of embedded applications.
PIC18F4620-I/PT

Description: The PIC18F4620-I/PT is an 8-bit microcontroller from Microchip Technologys PIC18 series, o ...
Package: TRAY | MOQ: 320 | MPQ: 160

PIC16F882-I/SP / The PIC16F882-I/SP is an 8-bit microcontroller from Microchip Technologys PIC® 16F series, designed for embedded control applications. It offers a balance of performance, peripheral integration, and low power consumption, making it suitable for a wide range of applications.
PIC16F882-I/SP

Description: The PIC16F882-I/SP is an 8-bit microcontroller from Microchip Technologys PIC® 16F series ...
Package: TUBE | MOQ: 1005 | MPQ: 15

KSZ8041NL-TR / The KSZ8041NL-TR is a single-supply 10BASE-T/100BASE-TX physical layer transceiver from Microchip Technology, designed to provide MII/RMII interfaces for data transmission and reception.
KSZ8041NL-TR

Description: The KSZ8041NL-TR is a single-supply 10BASE-T/100BASE-TX physical layer transceiver from Mi ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ATMEGA8A-PU / The ATMEGA8A-PU is an 8-bit microcontroller from Microchip Technologys AVR® ATmega family, designed for high-performance and low-power applications. It features advanced RISC architecture, combining 8KB of in-system programmable Flash memory, 1KB SRAM, and 512B EEPROM. This microcontroller operates at speeds up to 16 MHz and supports various peripherals, making it suitable for a wide range of embedded system applications.
ATMEGA8A-PU

Description: The ATMEGA8A-PU is an 8-bit microcontroller from Microchip Technologys AVR® ATmega family ...
Package: TUBE | MOQ: 1008 | MPQ: 14

MAX7219EWG+T / The MAX7219EWG+T is a serially interfaced, 8-digit LED display driver from Analog Devices (formerly Maxim Integrated). It simplifies the process of controlling multiple 7-segment LED displays by integrating a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit.
MAX7219EWG+T

Description: The MAX7219EWG+T is a serially interfaced, 8-digit LED display driver from Analog Devices ...
Package: T&R | MOQ: 1000 | MPQ: 1000

THGAMVG8T13BAIL / The THGAMVG8T13BAIL is a 32GB e•MMC™ (embedded MultiMediaCard) memory module from Kioxia America, Inc., designed for high-performance data storage in various electronic devices.
THGAMVG8T13BAIL

Description: The THGAMVG8T13BAIL is a 32GB e•MMC™ (embedded MultiMediaCard) memory module from Kiox ...
Package: TRAY | MOQ: 304 | MPQ: 152

AO3401A / The AO3401A is a P-channel MOSFET in an SOT-23-3 package, designed for low-voltage switching applications. It features low on-resistance, high efficiency, and fast switching speed, making it ideal for battery-powered devices, DC-DC converters, load switching, and power management applications.
AO3401A

Description: The AO3401A is a P-channel MOSFET in an SOT-23-3 package, designed for low-voltage switchi ...
Package: T&R | MOQ: 3000 | MPQ: 3000

ACS711KEXLT-15AB-T / The ACS711KEXLT-15AB-T is a Hall-effect-based linear current sensor from Allegro Microsystems, designed for accurate and high-bandwidth current sensing applications. It operates with a supply voltage range of 3.0V to 5.5V and provides an analog voltage output proportional to the measured current. With a current sensing range of ±15A and a sensitivity of 90 mV/A, it offers precise measurement capabilities. The sensor has a fast response time of 5 µs and a bandwidth of 80 kHz, making it suitable for real-time current monitoring. Its offset voltage is set at Vcc/2 when no current is applied, ensuring a stable reference point. The linearity error is typically ±1%, while the maximum accuracy deviation is ±2.1% at 25°C. For safety and reliability, the device provides an isolation voltage of 2.1 kV RMS, enabling use in high-voltage applications. It is housed in an 8-SOIC surface-mount package, making it easy to integrate into compact PCB designs. The ACS711KEXLT-15AB-T operates across a wide temperature range of -40°C to +125°C and is RoHS compliant, ensuring environmental safety. With its combination of high sensitivity, fast response, and electrical isolation, this current sensor is ideal for industrial, automotive, and consumer electronics applications.
ACS711KEXLT-15AB-T

Description: The ACS711KEXLT-15AB-T is a Hall-effect-based linear current sensor from Allegro Microsyst ...
Package: T&R | MOQ: 1500 | MPQ: 1500

ACS711KEXLT-31AB-T / The ACS711KEXLT-31AB-T is a Hall effect-based linear current sensor IC from Allegro MicroSystems, designed for accurate AC and DC current sensing in industrial, commercial, and communications systems. It offers electrical isolation and a low-resistance current path, making it suitable for applications requiring minimal power loss and high reliability.
ACS711KEXLT-31AB-T

Description: The ACS711KEXLT-31AB-T is a Hall effect-based linear current sensor IC from Allegro MicroS ...
Package: T&R | MOQ: 1500 | MPQ: 1500

G5V-2 DC3 / The Omron G5V-2 DC3 is a compact, general-purpose signal relay designed for reliable low-level switching applications. Measuring approximately 20.3mm in length, 10.1mm in width, and 8.4mm in height, it is suitable for high-density PCB mounting. This relay features a Double Pole Double Throw (DPDT) contact configuration, allowing control of two separate circuits with two possible outputs each. With a 3V DC coil voltage and a coil resistance of 18Ω, it consumes approximately 500mW of power. The G5V-2 DC3 supports a maximum switching voltage of 125VAC or 125VDC and has a contact current rating of up to 2A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -25°C to 65°C and is designed for through-hole PCB mounting.
G5V-2 DC3

Description: The Omron G5V-2 DC3 is a compact, general-purpose signal relay designed for reliable low-l ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-2 DC9 / The Omron G5V-2 DC9 is a compact, general-purpose signal relay designed for reliable low-level switching applications. Measuring approximately 20.3mm in length, 10.1mm in width, and 8.4mm in height, it is ideal for high-density PCB mounting. This relay features a Double Pole Double Throw (DPDT) contact configuration, enabling control of two separate circuits with two possible outputs each. With a 9V DC coil voltage and a coil resistance of 162Ω, it consumes approximately 500mW of power. The G5V-2 DC9 supports a maximum switching voltage of 125VAC or 125VDC and has a contact current rating of up to 2A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -25°C to 65°C and is designed for through-hole PCB mounting.
G5V-2 DC9

Description: The Omron G5V-2 DC9 is a compact, general-purpose signal relay designed for reliable low-l ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6S-2 DC4.5 / The Omron G6S-2 DC4.5 is a compact, general-purpose telecom relay designed for reliable low-level switching applications. Measuring approximately 20.3mm in length, 10.1mm in width, and 8.4mm in height, it is ideal for high-density PCB mounting. This relay features a Double Pole Double Throw (DPDT) contact configuration, enabling control of two separate circuits with two possible outputs each. With a 4.5V DC coil voltage and a coil resistance of 145Ω, it consumes approximately 139.5mW of power. The G6S-2 DC4.5 supports a maximum switching voltage of 250VAC or 220VDC and has a contact current rating of up to 2A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -40°C to 85°C and is designed for through-hole PCB mounting.
G6S-2 DC4.5

Description: The Omron G6S-2 DC4.5 is a compact, general-purpose telecom relay designed for reliable lo ...
Package: TUBE | MOQ: 1250 | MPQ: 50

G5V-2-H1 DC9 / The Omron G5V-2-H1 DC9 is a compact, general-purpose signal relay designed for applications requiring reliable low-level switching. Measuring approximately 20.5mm in length, 10mm in width, and 11.5mm in height, this relay is suitable for high-density PCB mounting. It features a Double Pole Double Throw (DPDT) contact configuration, allowing it to control two separate circuits with two possible outputs each. With a 9V DC coil voltage and a coil resistance of 540Ω, the relay consumes approximately 150mW of power. It supports a maximum switching voltage of 125VAC or 125VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -25°C to 70°C and is designed for through-hole PCB mounting.
G5V-2-H1 DC9

Description: The Omron G5V-2-H1 DC9 is a compact, general-purpose signal relay designed for application ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-1 DC6 / The Omron G5V-1 DC9 is a compact, general-purpose signal relay designed for reliable low-level switching applications. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, it is ideal for high-density PCB mounting. This relay features a Single Pole Double Throw (SPDT) contact configuration, enabling control of one circuit with two possible outputs. With a 9V DC coil voltage and a coil resistance of 540Ω, it consumes approximately 150mW of power. The G5V-1 DC9 supports a maximum switching voltage of 125VAC or 60VDC and has a contact current rating of up to 1A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-1 DC6

Description: The Omron G5V-1 DC9 is a compact, general-purpose signal relay designed for reliable low-l ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-1 DC9 / The Omron G5V-1 DC9 is a compact, general-purpose signal relay designed for reliable low-level switching applications. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, it is ideal for high-density PCB mounting. This relay features a Single Pole Double Throw (SPDT) contact configuration, enabling control of one circuit with two possible outputs. With a 9V DC coil voltage and a coil resistance of 540Ω, it consumes approximately 150mW of power. The G5V-1 DC9 supports a maximum switching voltage of 125VAC or 60VDC and has a contact current rating of up to 1A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-1 DC9

Description: The Omron G5V-1 DC9 is a compact, general-purpose signal relay designed for reliable low-l ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-1-2 DC5 / The Omron G5V-1-2 DC5 is a compact, general-purpose signal relay designed for reliable low-level switching applications. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, it is ideal for high-density PCB mounting. This relay features a Single Pole Double Throw (SPDT) contact configuration, enabling control of one circuit with two possible outputs. With a 5V DC coil voltage and a coil resistance of 167Ω, it consumes approximately 150mW of power. The G5V-1-2 DC5 supports a maximum switching voltage of 125VAC or 60VDC and has a contact current rating of up to 1A, making it versatile for various signal switching applications. It operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-1-2 DC5

Description: The Omron G5V-1-2 DC5 is a compact, general-purpose signal relay designed for reliable low ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-13 DC12 / The Omron G5V-13 DC12 is a compact, general-purpose signal relay designed for applications requiring reliable low-level switching. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, this relay is suitable for high-density PCB mounting. It features a Single Pole Double Throw (SPDT) contact configuration, allowing it to control one circuit with two possible outputs. With a 12V DC coil voltage and a coil resistance of 960Ω, the relay consumes approximately 150mW of power. It supports a maximum switching voltage of 125VAC or 60VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-13 DC12

Description: The Omron G5V-13 DC12 is a compact, general-purpose signal relay designed for applications ...
Package: TUBE | MOQ: 500 | MPQ: 500

G5V-13 DC5 / The Omron G5V-13 DC5 is a compact, general-purpose signal relay designed for applications requiring reliable low-level switching. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, this relay is suitable for high-density PCB mounting. It features a Single Pole Double Throw (SPDT) contact configuration, allowing it to control one circuit with two possible outputs. With a 5V DC coil voltage and a coil resistance of 167Ω, the relay consumes approximately 150mW of power. It supports a maximum switching voltage of 125VAC or 60VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-13 DC5

Description: The Omron G5V-13 DC5 is a compact, general-purpose signal relay designed for applications ...
Package: TUBE | MOQ: 500 | MPQ: 500

G5V-1-2 DC12 / The Omron G5V-1-2 DC12 is a compact, general-purpose signal relay designed for applications requiring reliable low-level switching. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, this relay is suitable for high-density PCB mounting. It features a Single Pole Double Throw (SPDT) contact configuration, allowing it to control one circuit with two possible outputs. With a 12V DC coil voltage and a coil resistance of 960Ω, the relay consumes approximately 150mW of power. It supports a maximum switching voltage of 125VAC or 60VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-1-2 DC12

Description: The Omron G5V-1-2 DC12 is a compact, general-purpose signal relay designed for application ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G5V-1 DC3 / The Omron G5V-1 DC3 is a compact, general-purpose signal relay designed for applications requiring reliable low-level switching. Measuring approximately 12.5mm in length, 7.5mm in width, and 10mm in height, this relay is suitable for high-density PCB mounting. It features a Single Pole Double Throw (SPDT) contact configuration, allowing it to control one circuit with two possible outputs. With a 3V DC coil voltage and a coil resistance of 60Ω, the relay consumes approximately 150mW of power. It supports a maximum switching voltage of 125VAC or 60VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G5V-1 DC3

Description: The Omron G5V-1 DC3 is a compact, general-purpose signal relay designed for applications r ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6AK-274P-ST-US DC24 / The Omron G6AK-274P-ST-US-DC24 is a compact, dual-coil latching signal relay designed for low-profile PCB applications. Measuring 20.2mm in length, 10.1mm in width, and 8.4mm in height, this relay is suitable for high-density mounting. It features a DPDT (2 Form C) contact configuration, allowing it to control two separate circuits simultaneously. With a 24V DC coil voltage and a coil resistance of 3.2kΩ, the relay consumes approximately 180mW of power. It supports a maximum switching voltage of 250VAC or 220VDC and a contact current rating of up to 2A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G6AK-274P-ST-US DC24

Description: The Omron G6AK-274P-ST-US-DC24 is a compact, dual-coil latching signal relay designed for ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6AK-234P-ST-US DC5 / The Omron G6AK-234P-ST-US DC5 is a compact, dual-coil latching signal relay designed for low-profile PCB applications. Measuring 20.2mm in length, 10.1mm in width, and 8.4mm in height, this relay is suitable for high-density mounting. It features a DPDT (2 Form C) contact configuration, allowing it to control two separate circuits simultaneously. With a 5V DC coil voltage and a coil resistance of 139Ω, the relay consumes approximately 180mW of power. It supports a maximum switching voltage of 250VAC or 220VDC and a contact current rating of up to 1A, making it versatile for various signal switching applications. The relay operates efficiently within a temperature range of -40°C to 70°C and is designed for through-hole PCB mounting.
G6AK-234P-ST-US DC5

Description: The Omron G6AK-234P-ST-US DC5 is a compact, dual-coil latching signal relay designed for l ...
Package: TUBE | MOQ: 1250 | MPQ: 25

AO3400A / The AO3400A is a compact N-channel logic-level power MOSFET designed for low-voltage, high-efficiency switching applications. It features a drain-source voltage rating of 30 V and supports continuous drain currents up to approximately 5.8 A under proper thermal conditions. The device offers very low on-resistance (Rds(on)) typically around 30 mΩ at Vgs = 4.5 V, enabling efficient operation with minimal conduction losses. It can be fully driven by low gate voltages, making it suitable for direct interfacing with microcontrollers and low-voltage logic circuits. The AO3400A is commonly used in load switching, DC-DC converters, battery-powered devices, power management circuits, and portable electronics where space-saving SMD packaging is required.
AO3400A

Description: The AO3400A is a compact N-channel logic-level power MOSFET designed for low-voltage, high ...
Package: T&R | MOQ: 3000 | MPQ: 3000

LTM4637IY#PBF / The LTM4637IY#PBF is a high-efficiency, synchronous step-down DC/DC µModule regulator from Analog Devices Inc., designed to deliver up to 20A of continuous output current. It operates over an input voltage range of 4.5V to 20V and provides an adjustable output voltage between 0.6V and 5.5V. This compact module integrates power MOSFETs, inductors, a DC/DC controller, and compensation circuitry within a single package, simplifying design and reducing the need for external components. Key features include overcurrent protection (OCP), overtemperature protection (OTP), and output overvoltage protection (OVP), ensuring reliable performance in various applications such as telecommunications, networking equipment, industrial systems, and medical devices. The LTM4637IY#PBF is housed in a 15mm x 15mm x 4.92mm BGA package, making it suitable for space-constrained designs.
LTM4637IY#PBF

Description: The LTM4637IY#PBF is a high-efficiency, synchronous step-down DC/DC µModule regulator fro ...
Package: TRAY | MOQ: 119 | MPQ: 119

LTC3889IUKG#TRPBF / The LTC3889IUKG#TRPBF is a dual-output, step-down (buck) switching regulator controller from Analog Devices. It is designed to convert higher input voltages ranging from 5V to 60V down to lower output voltages between 1V and 40V, suitable for various applications requiring efficient power management.
LTC3889IUKG#TRPBF

Description: The LTC3889IUKG#TRPBF is a dual-output, step-down (buck) switching regulator controller fr ...
Package: T&R | MOQ: 2000 | MPQ: 2000

AD8479ARZ-RL / The AD8479ARZ-RL is a high-precision difference amplifier designed for high-voltage measurements up to ±600V. It operates with low power consumption (550µA) and features a fixed gain of 1, making it ideal for current sensing and voltage monitoring applications. With a high common-mode rejection ratio (100 dB) and low input offset voltage (500µV), it ensures accurate signal processing in industrial and power management systems. The amplifier is available in an 8-lead SOIC package, making it suitable for surface-mount applications in compact designs.
AD8479ARZ-RL

Description: The AD8479ARZ-RL is a high-precision difference amplifier designed for high-voltage measur ...
Package: T&R | MOQ: 2500 | MPQ: 2500

G6AK-274P-ST-US DC12 / The G6AK-274P-ST-US DC12 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting applications. It operates with a 12 VDC coil voltage and 230 mW coil power consumption. The relay is capable of switching up to 10 A at 30 VDC and 7 A at 125 VAC, making it ideal for use in industrial control systems, home appliances, and HVAC systems. Built with silver alloy contacts, it offers reliable and long-lasting operation. The relay features a 1000 VAC dielectric strength for effective insulation and fast switching times (with 10 ms operate time and 5 ms release time). Designed to function across a wide temperature range of -40°C to +85°C, this relay is suitable for a variety of environments where performance and durability are critical.
G6AK-274P-ST-US DC12

Description: The G6AK-274P-ST-US DC12 from Omron is a high-sensitivity SPDT power relay designed for th ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6EK-134P-ST-US DC5 / The G6EK-134P-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting applications that require high-power switching. It operates with a 5 VDC coil voltage and a 100 mW coil power consumption. Capable of switching 10 A at 30 VDC and 7 A at 125 VAC, the relay is suited for a wide range of applications, including industrial control systems, home appliances, and HVAC systems. The silver alloy contacts ensure reliable performance, and the 1000 VAC dielectric strength provides effective isolation between the coil and contacts. With fast switching times of 10 ms for the operate time and 5 ms for the release time, this relay is designed for fast and efficient operation in harsh environments with an operating temperature range of -40°C to +85°C.
G6EK-134P-ST-US DC5

Description: The G6EK-134P-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for thr ...
Package: TUBE | MOQ: 125 | MPQ: 25

G6A-274P-ST15-US DC24 / The G6A-274P-ST15-US DC24 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting in high-power circuits. It operates at 24 VDC with a coil power consumption of 230 mW, and it can switch 10 A at 30 VDC and 7 A at 125 VAC. The relay features silver alloy contacts, providing durability and reliable switching over time. With a 1000 VAC dielectric strength, it offers effective insulation and safety. The relay’s fast switching speeds (with 10 ms operate time and 5 ms release time) make it well-suited for industrial control systems, home appliances, and HVAC systems. Designed to operate within -40°C to +85°C, it is durable enough for use in challenging environments.
G6A-274P-ST15-US DC24

Description: The G6A-274P-ST15-US DC24 from Omron is a high-sensitivity SPDT power relay designed for t ...
Package: T&R | MOQ: 500 | MPQ: 500

G6A-274P-ST-US DC5 / The G6A-274P-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting in high-power applications. It operates with a 5 VDC coil voltage and consumes 100 mW of coil power. This relay is capable of handling 10 A at 30 VDC and 7 A at 125 VAC, making it suitable for a wide variety of applications, such as industrial control systems, home appliances, and HVAC equipment. Featuring silver alloy contacts, the relay ensures long-term durability and reliability. The 1000 VAC dielectric strength allows for effective isolation, while the fast switching times (10 ms operate, 5 ms release) provide high-performance operation. It is designed to operate in temperatures ranging from -40°C to +85°C, making it ideal for harsh and demanding environments.
G6A-274P-ST-US DC5

Description: The G6A-274P-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for thro ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6A-274P-ST40-US DC24 / The G6A-274P-ST40-US DC24 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting applications in high-power circuits. Operating at 24 VDC with a coil power consumption of 230 mW, this relay can handle up to 10 A at 30 VDC and 7 A at 125 VAC, making it suitable for industrial control systems, home appliances, and HVAC equipment. The relay features silver alloy contacts for enhanced durability and long life, with 1000 VAC dielectric strength for effective isolation. It has fast switching times, with an operate time of 10 ms and a release time of 5 ms, and can operate in a temperature range of -40°C to +85°C, ensuring reliability in demanding conditions.
G6A-274P-ST40-US DC24

Description: The G6A-274P-ST40-US DC24 from Omron is a high-sensitivity SPDT power relay designed for t ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6E-134PL-ST-US DC5 / The G6E-134PL-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting applications that require high-power switching. It operates with a 5 VDC coil voltage and consumes 100 mW of power. This relay can handle 10 A at 30 VDC and 7 A at 125 VAC, making it ideal for a wide range of applications, including industrial control systems, home appliances, and HVAC equipment. The silver alloy contacts provide long-term durability, while the 1000 VAC dielectric strength ensures safe and effective operation. The relay offers fast switching times of 10 ms (operate) and 5 ms (release), and it can function in an operating temperature range of -40°C to +85°C, making it suitable for demanding environments.
G6E-134PL-ST-US DC5

Description: The G6E-134PL-ST-US DC5 from Omron is a high-sensitivity SPDT power relay designed for thr ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6A-274P-ST-US DC24 / The G6A-274P-ST-US DC24 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting in applications requiring high power switching. It operates with a 24 VDC coil voltage and 230 mW coil power consumption, making it suitable for various industrial control and home appliance applications. The relay supports 10 A at 30 VDC and 7 A at 125 VAC, providing reliable and robust switching for medium-power circuits. With silver alloy contacts, it ensures durability over a long operational life. The relay is built with a 1000 VAC dielectric strength and fast switching times of 10 ms (operate) and 5 ms (release). Operating within the temperature range of -40°C to +85°C, it is suitable for use in harsh environments, offering high reliability and efficiency in industrial and HVAC systems.
G6A-274P-ST-US DC24

Description: The G6A-274P-ST-US DC24 from Omron is a high-sensitivity SPDT power relay designed for thr ...
Package: TUBE | MOQ: 1250 | MPQ: 25

G6A-274P-ST-US DC12 / The G6A-274P-ST-US DC12 from Omron is a high-sensitivity SPDT power relay designed for through-hole mounting applications in industrial control systems and home appliances. It operates with a 12 VDC coil voltage and 180 mW power consumption, making it suitable for medium-power switching applications. The relay is rated for 10 A at 30 VDC and 7 A at 125 VAC, providing reliable high-power switching. With a contact material made from silver alloy, it ensures long-term durability. The 1000 VAC dielectric strength and fast switching times (10 ms operate and 5 ms release) provide dependable performance. Designed to operate in temperatures ranging from -40°C to +85°C, this relay is suitable for use in high-demand environments such as HVAC systems and power equipment.
G6A-274P-ST-US DC12

Description: The G6A-274P-ST-US DC12 from Omron is a high-sensitivity SPDT power relay designed for thr ...
Package: TUBE | MOQ: 1250 | MPQ: 25













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |