All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

MT47H64M16NF-25E IT:M / ​The MT47H64M16NF-25E IT:M is a DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) module produced by Micron Technology Inc., offering a storage capacity of 1 gigabit (Gb). It is organized as 64 million words by 16 bits (64M x 16), providing a 16-bit data bus width. The module operates with a supply voltage between 1.7V and 1.9V and features an access time of 400 picoseconds, ensuring efficient data retrieval. It supports a maximum clock frequency of 400 MHz, corresponding to a data transfer rate of 800 megabits per second per pin. The write cycle time for both word and page operations is 15 nanoseconds. Housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package measuring 8 x 12.5 mm, the module is suitable for surface-mount applications. It is rated for an operating temperature range of -40°C to 95°C, making it suitable for automotive applications. The TR suffix indicates that the module is supplied in tape and reel packaging, facilitating automated assembly processes. ​
MT47H64M16NF-25E IT:M

Description: ​The MT47H64M16NF-25E IT:M is a DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) mo ...
Package: TRAY | MOQ: 1368 | MPQ: 1368

MT47H64M16NF-25E AIT:M / ​The MT47H64M16NF-25E AIT:M is a DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) module manufactured by Micron Technology Inc. It offers a storage capacity of 1 gigabit (Gb), organized as 64 million words by 16 bits (64M x 16), providing a 16-bit data bus width. This module operates with a supply voltage between 1.7V and 1.9V and features an access time of 400 picoseconds, ensuring efficient data retrieval. It supports a maximum clock frequency of 400 MHz, corresponding to a data transfer rate of 800 megabits per second per pin. The write cycle time for both word and page operations is 15 nanoseconds. Housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package measuring 8 x 12.5 mm, the module is suitable for surface-mount applications. It is rated for an operating temperature range of -40°C to 95°C, making it suitable for automotive applications. The TR suffix indicates that the module is supplied in tape and reel packaging, facilitating automated assembly processes. ​
MT47H64M16NF-25E AIT:M

Description: ​The MT47H64M16NF-25E AIT:M is a DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) m ...
Package: T&R | MOQ: 1368 | MPQ: 1368

MT47H64M16NF-25E AAT:M / ​The MT47H64M16NF-25E AAT:M is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) module produced by Micron Technology Inc. It is organized as 64 million words by 16 bits (64M x 16), providing a data bus width of 16 bits. The module operates with a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds, ensuring rapid data retrieval. It supports a maximum clock frequency of 400 MHz, corresponding to a data transfer rate of 800 megabits per second per pin. The write cycle time for both word and page operations is 15 nanoseconds. Housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package measuring 8 x 12.5 mm, the module is suitable for surface-mount applications. It is rated for an operating temperature range of -40°C to 105°C, making it suitable for automotive applications. The TR suffix indicates that the module is supplied in tape and reel packaging, facilitating automated assembly processes. ​
MT47H64M16NF-25E AAT:M

Description: ​The MT47H64M16NF-25E AAT:M is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access M ...
Package: TRAY | MOQ: 1368 | MPQ: 1368

MT47H64M16HR-3:H TR / ​The MT47H64M16HR-3:H TR is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) module manufactured by Micron Technology Inc. It is organized as 64 million words by 16 bits (64M x 16), providing a data bus width of 16 bits. The module operates with a supply voltage between 1.7V and 1.9V and features an access time of 450 picoseconds, ensuring rapid data retrieval. It supports a maximum clock frequency of 333 MHz, corresponding to a data transfer rate of 666 megabits per second per pin. The write cycle time for both word and page operations is 15 nanoseconds. Housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package measuring 8 x 12.5 mm, the module is suitable for surface-mount applications. It is rated for an operating temperature range of 0°C to 85°C, making it suitable for commercial applications. The TR suffix indicates that the module is supplied in tape and reel packaging, facilitating automated assembly processes. ​
MT47H64M16HR-3:H TR

Description: ​The MT47H64M16HR-3:H TR is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memo ...
Package: T&R | MOQ: 2000 | MPQ: 2000

IS46DR16640C-3DBLA1-TR / ​The IS46DR16640C-3DBLA1-TR is a 1-gigabit DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) module produced by Integrated Silicon Solution Inc. (ISSI). It features a 64M x 16-bit organization, operating at a clock frequency of up to 333 MHz, which corresponds to a data transfer rate of 666 megabits per second per pin. The module requires a supply voltage between 1.7V and 1.9V and offers an access time of 450 picoseconds. It is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8mm x 12.5mm and is rated for an operating temperature range of -40°C to +95°C, making it suitable for automotive applications. The TR suffix indicates that the module is supplied in tape and reel packaging, ideal for automated assembly processes.​
IS46DR16640C-3DBLA1-TR

Description: ​The IS46DR16640C-3DBLA1-TR is a 1-gigabit DDR2 Synchronous Dynamic Random-Access Memory ...
Package: T&R | MOQ: 2500 | MPQ: 2500

IS46DR16640C-25DBLA2-TR / ​The IS46DR16640C-25DBLA2-TR is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at a clock frequency of up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device requires a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports a write cycle time of 15 nanoseconds. The SDRAM includes eight internal banks for concurrent operations and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within an industrial temperature range of -40°C to 105°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​
IS46DR16640C-25DBLA2-TR

Description: ​The IS46DR16640C-25DBLA2-TR is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access ...
Package: T&R | MOQ: 2500 | MPQ: 2500

IS46DR16640C-25DBLA2 / ​The IS46DR16640C-25DBLA2 is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at a clock frequency of up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device requires a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports a write cycle time of 15 nanoseconds. The SDRAM includes eight internal banks for concurrent operations and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within an industrial temperature range of -40°C to 105°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​
IS46DR16640C-25DBLA2

Description: ​The IS46DR16640C-25DBLA2 is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Mem ...
Package: TRAY | MOQ: 418 | MPQ: 209

IS46DR16640B-25EBLA1 / ​The IS46DR16640B-25EBLA1 is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at clock frequencies up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device requires a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports programmable CAS latencies of 3, 4, 5, 6, and 7, along with programmable additive latencies from 0 to 6. The SDRAM includes eight internal banks for concurrent operations and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within an industrial temperature range of -40°C to 85°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​
IS46DR16640B-25EBLA1

Description: ​The IS46DR16640B-25EBLA1 is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Mem ...
Package: TRAY | MOQ: 418 | MPQ: 209

IS43DR16640C-25DBLI / ​The IS43DR16640C-25DBLI is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at a clock frequency of up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device requires a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports a write cycle time of 15 nanoseconds. The SDRAM includes eight internal banks for concurrent operations and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within an industrial temperature range of -40°C to 85°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​
IS43DR16640C-25DBLI

Description: ​The IS43DR16640C-25DBLI is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memo ...
Package: TRAY | MOQ: 418 | MPQ: 209

IS43DR16640C-25DBL / ​The IS43DR16640C-25DBL is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at a clock frequency of up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device requires a supply voltage between 1.7V and 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports a write cycle time of 15 nanoseconds. The SDRAM includes eight internal banks for concurrent operations and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within a temperature range of 0°C to 85°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​
IS43DR16640C-25DBL

Description: ​The IS43DR16640C-25DBL is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memor ...
Package: TRAY | MOQ: 418 | MPQ: 209

IS43DR16640B-25EBL / The IS43DR16640B-25EBL is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at clock frequencies up to 400 MHz, achieving data transfer rates up to 800 megabits per second per pin. The device functions within a supply voltage range of 1.7V to 1.9V and offers an access time of 450 picoseconds. It features a 4-bit prefetch architecture and supports programmable CAS latencies of 3, 4, 5, 6, and 7, along with programmable additive latencies from 0 to 6. The SDRAM includes eight internal banks for concurrent operation and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features include on-die termination (ODT), automatic and controlled precharge commands, auto-refresh and self-refresh modes, and a refresh interval of 7.8 µs. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within an industrial temperature range of 0°C to 70°C, making it suitable for various applications requiring high-speed and reliable memory solutions. ​Alternative P/N: IS43DR16640B-25EBLI
IS43DR16640B-25EBL

Description: The IS43DR16640B-25EBL is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory ( ...
Package: TRAY | MOQ: 418 | MPQ: 209

IS43DR16640B-25DBLI / ​The IS43DR16640B-25DBLI is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Integrated Silicon Solution Inc. (ISSI), organized as 64 million words by 16 bits (64M x 16). It operates at clock frequencies up to 400 MHz, delivering data transfer rates up to 800 megabits per second per pin. The device functions within a supply voltage range of 1.7V to 1.9V and offers an access time of 400 picoseconds. It features a 4-bit prefetch architecture and supports programmable CAS latencies of 3, 4, 5, 6, and 7, along with programmable additive latencies from 0 to 6. The SDRAM includes eight internal banks for concurrent operation and supports programmable burst lengths of 4 and 8, with both sequential and interleave burst types. Additional features comprise on-die termination (ODT), off-chip driver (OCD) impedance adjustment, and automatic and controlled precharge commands. The device is housed in an 84-ball Thin Fine-Pitch Ball Grid Array (TFBGA) package measuring 8 x 12.5 mm and operates within a temperature range of -40°C to +85°C, making it suitable for various industrial applications requiring high-speed and reliable memory solutions. ​
IS43DR16640B-25DBLI

Description: ​The IS43DR16640B-25DBLI is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memo ...
Package: TRAY | MOQ: 418 | MPQ: 209

EM68C16CWQG-25IH / ​The EM68C16CWQG-25IH is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Etron Technology, organized as 64 million words by 16 bits (64M x 16). Designed for high-performance applications, it operates at a clock frequency of 400 MHz, achieving data transfer rates up to 800 megabits per second per pin. The device operates within a supply voltage range of 1.7V to 1.9V and offers an access time of 400 picoseconds. It features a write cycle time of 15 nanoseconds and is housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package measuring 8 x 12.5 mm. With an operating temperature range from -40°C to +95°C, the EM68C16CWQG-25IH is suitable for various industrial applications requiring reliable and efficient memory solutions. ​
EM68C16CWQG-25IH

Description: ​The EM68C16CWQG-25IH is a 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory ...
Package: T&R | MOQ: 2500 | MPQ: 2500

AS4C64M16D2A-25BIN / ​The AS4C64M16D2A-25BIN is a high-speed, 1-gigabit (Gb) DDR2 Synchronous Dynamic Random-Access Memory (SDRAM) from Alliance Memory, organized as 64 million words by 16 bits (64M x 16). Designed for high-performance applications, it features a double-data-rate architecture with an 8n prefetch, enabling data transfer rates up to 400 MHz. The device operates with a supply voltage range of 1.7V to 1.9V and supports fully synchronous operations with a differential clock (CK and CK#). It includes eight internal banks for concurrent operation and offers programmable CAS latencies of 3, 4, and 5. Additional features encompass bidirectional single/differential data strobes (DQS and DQS#), on-die termination (ODT), off-chip driver (OCD) impedance adjustment, and automatic self-refresh with a refresh period of 7.8 µs. The AS4C64M16D2A-25BIN is housed in an 84-ball FBGA package and operates within an industrial temperature range of -40°C to 95°C, making it suitable for various applications requiring reliable and efficient memory solutions. T&R Part Number: ​AS4C64M16D2A-25BINTR
AS4C64M16D2A-25BIN

Description: ​The AS4C64M16D2A-25BIN is a high-speed, 1-gigabit (Gb) DDR2 Synchronous Dynamic Random- ...
Package: TRAY | MOQ: 418 | MPQ: 209

XC6SLX150-3FGG900I / ​The XC6SLX150-3FGG900I is a high-performance Field Programmable Gate Array (FPGA) from Xilinx Spartan-6 LX series, designed to deliver efficient system integration for cost-sensitive applications. Fabricated using a 45 nm process technology, it offers a balance between power consumption and performance. The device features approximately 147,443 logic cells and 11,519 Configurable Logic Blocks (CLBs), providing substantial resources for complex digital designs. It includes 4,939,776 bits of total RAM, facilitating efficient data storage and retrieval. With 576 versatile I/O pins, the FPGA supports data transfer rates up to 1,080 Mb/s per differential I/O, accommodating a range of I/O standards from 3.3V to 1.2V. Operating at a core voltage of 1.2V, the FPGA supports an operating temperature range from -40°C to 100°C, making it suitable for diverse environmental conditions. The device also incorporates efficient DSP48A1 slices for high-performance arithmetic and signal processing, integrated memory controller blocks compatible with DDR, DDR2, DDR3, and LPDDR, and Clock Management Tiles (CMTs) featuring Digital Clock Managers (DCMs) and Phase-Locked Loops (PLLs) for flexible, low-noise clocking. Security features include a unique Device DNA identifier for design authentication and AES bitstream encryption for enhanced design protection. These attributes make the XC6SLX150-3FGG900I well-suited for applications in digital signal processing, communications systems, industrial control, automotive systems, and aerospace and defense sectors. ​
XC6SLX150-3FGG900I

Description: ​The XC6SLX150-3FGG900I is a high-performance Field Programmable Gate Array (FPGA) from ...
Package: TRAY | MOQ: 27 | MPQ: 27

N25Q256A13E1240E / ​The N25Q256A13E1240E is a 256-megabit (32MB) NOR Flash memory chip from Micron Technology, designed for high-performance and reliable non-volatile storage. It utilizes a Serial Peripheral Interface (SPI) supporting clock frequencies up to 108 MHz, facilitating rapid data transfer. The memory is organized into 512 main sectors of 64KB each, further divided into 8,192 subsectors of 4KB, allowing flexible and efficient memory management. Notable features include hardware-based write protection, 64 one-time programmable (OTP) bytes for secure data storage, and the ability to pause and resume program or erase cycles via dedicated suspend and resume instructions. Operating within a voltage range of 2.7V to 3.6V and a temperature range of -40°C to 85°C, it is suitable for various applications, including embedded systems, telecommunications, automotive electronics, industrial automation, and consumer electronics. ​
N25Q256A13E1240E

Description: ​The N25Q256A13E1240E is a 256-megabit (32MB) NOR Flash memory chip from Micron Technolo ...
Package: TRAY | MOQ: 1122 | MPQ: 1122

MT29F1G08ABADAH4-IT / ​The MT29F1G08ABADAH4-IT:D is a 1-gigabit (128M x 8) single-level cell (SLC) NAND flash memory device from Micron Technology. Operating within a voltage range of 2.7V to 3.6V, it offers reliable non-volatile storage suitable for a variety of applications. The device is designed to function effectively in industrial environments, supporting an operating temperature range from -40°C to 85°C. It is housed in a compact 63-ball VFBGA package, measuring 9mm x 11mm, facilitating efficient integration into space-constrained designs. However, it is important to note that this model has been classified as obsolete, and designers should consider this status when planning new projects. ​
MT29F1G08ABADAH4-IT

Description: ​The MT29F1G08ABADAH4-IT:D is a 1-gigabit (128M x 8) single-level cell (SLC) NAND flash ...
Package: TRAY | MOQ: 1260 | MPQ: 1260

MT47H64M16HR-3 IT:H / ​The MT47H64M16HR-3 IT:H is a 1-gigabit (1Gb) DDR2 SDRAM (Synchronous Dynamic Random-Access Memory) chip developed by Micron Technology. Organized as 64 million words by 16 bits (64M x 16), it operates with a supply voltage range of 1.7V to 1.9V. The device supports a clock frequency of up to 333 MHz and features a data transfer rate of 667 MT/s (megatransfers per second). Designed to meet JEDEC standards, it offers programmable CAS (Column Address Strobe) latency, burst length, and burst type, providing flexibility for various applications. The MT47H64M16HR-3 IT:H includes on-die termination (ODT) and a posted CAS additive latency feature to enhance signal integrity and performance. With an access time of approximately 450 ps, it ensures quick data retrieval. The device is housed in an 84-ball Fine-Pitch Ball Grid Array (FBGA) package, measuring 8 mm x 12.5 mm, and is suitable for surface-mount technology. Its industrial temperature range of -40°C to 95°C makes it ideal for use in networking equipment, computing systems, and other high-performance applications. ​
MT47H64M16HR-3 IT:H

Description: ​The MT47H64M16HR-3 IT:H is a 1-gigabit (1Gb) DDR2 SDRAM (Synchronous Dynamic Random-Acc ...
Package: TRAY | MOQ: 1000 | MPQ: 1000

V9260F / ​The V9260F is a single-phase energy metering analog front-end (AFE) integrated circuit (IC) developed by Vango Technology. It is designed to accurately measure active and reactive energy in single-phase electrical systems. It meets the requirements of IEC 62053-21:2003, IEC 62053-22:2003, and IEC 62053-23:2003 standards, ensuring less than 0.1% error in active and reactive energy metering over a dynamic range of 5000:1. Operating with a 3.3V power supply, the V9260F consumes approximately 1.7mA during full operation, making it suitable for energy-efficient applications. It features an internal reference voltage of 1.210V with a typical temperature coefficient of 10ppm/°C, providing stable and accurate voltage references for metering applications. The IC supports configurations for measuring active and reactive power through either two current channels for active metering or one current channel for both active and reactive power metering, offering flexibility based on application requirements. It utilizes a UART interface with automatic baud rate adaptation ranging from 1200bps to 19200bps, facilitating easy integration with microcontrollers and other digital systems for data retrieval and configuration. The V9260F operates without the need for an external crystal oscillator, simplifying design and reducing component count. It is designed to function within an operating temperature range of -40°C to +85°C, suitable for various environmental conditions.
V9260F

Description: ​The V9260F is a single-phase energy metering analog front-end (AFE) integrated circuit ...
Package: T&R | MOQ: 3000 | MPQ: 3000

MSP430F5659IPZR / ​The MSP430F5659IPZR is a mixed-signal microcontroller from Texas Instruments, featuring a 16-bit RISC CPU operating at up to 20 MHz. It offers 512 KB of flash memory and 66 KB of SRAM, providing substantial storage for complex applications. The device includes a high-performance 12-bit ADC with multiple channels for precise analog-to-digital conversions, as well as two 12-bit DACs for digital-to-analog signal generation. It also features four 16-bit timers, a hardware multiplier, DMA support, a real-time clock module with alarm capabilities, a comparator, and up to 74 I/O pins. Connectivity options include USB 2.0, I²C, IrDA, SPI, and UART/USART interfaces. Operating over a supply voltage range of 1.8 V to 3.6 V, the MSP430F5659IPZR is housed in a 100-pin LQFP package, making it suitable for applications requiring a balance of performance, memory, and peripheral integration. ​
MSP430F5659IPZR

Description: ​The MSP430F5659IPZR is a mixed-signal microcontroller from Texas Instruments, featuring ...
Package: T&R | MOQ: 1000 | MPQ: 1000

TPS63070RNMR / ​The TPS63070RNMR is a high-efficiency, low-quiescent current buck-boost converter from Texas Instruments, designed to provide a stable output voltage even when the input voltage is above or below the desired output. It operates over a wide input voltage range of 2.0 V to 16 V and supports output voltages between 2.5 V and 9 V, delivering up to 2 A of output current in both boost and buck modes. The converter utilizes synchronous rectification and a fixed-frequency, pulse-width modulation (PWM) controller to achieve efficiencies up to 95%. At light load conditions, it enters Power Save Mode to maintain high efficiency across varying load currents. Additional features include a precise ENABLE input for undervoltage lockout settings, automatic transition between step-down and boost modes, forced fixed-frequency operation at 2.4 MHz with synchronization capability, a power-good output, and load disconnect during shutdown to minimize battery drain. The TPS63070RNMR is housed in a compact 2.5 mm x 3 mm QFN package, making it suitable for space-constrained applications requiring efficient power conversion. ​
TPS63070RNMR

Description: ​The TPS63070RNMR is a high-efficiency, low-quiescent current buck-boost converter from ...
Package: T&R | MOQ: 3000 | MPQ: 3000

MSP430F6749AIPEUR / ​The MSP430F6749AIPEUR is a highly integrated polyphase metering system-on-chip (SoC) from Texas Instruments, tailored for precise energy metering applications. It features a 16-bit MSP430 CPU operating at up to 25 MHz, complemented by 512 KB of flash memory and 32 KB of SRAM, providing substantial storage for complex metering algorithms. The device incorporates up to seven independent 24-bit sigma-delta ADCs with differential inputs and programmable gain, ensuring accurate multi-phase measurements. It also includes a 10-bit SAR ADC for additional analog-to-digital conversion needs. For communication, the MSP430F6749AIPEUR offers multiple interfaces, including UART, SPI, I2C, and USB, facilitating versatile connectivity options. Security is addressed with an integrated AES-128 module, supporting data encryption and anti-tamper features. Designed for low-power operation, it offers various low-power modes to extend battery life in portable applications. Housed in a 128-pin LQFP package, the MSP430F6749AIPEUR is suitable for applications such as multi-phase energy meters, industrial automation, and power monitoring systems. ​
MSP430F6749AIPEUR

Description: ​The MSP430F6749AIPEUR is a highly integrated polyphase metering system-on-chip (SoC) fr ...
Package: T&R | MOQ: 750 | MPQ: 750

LNK3696G-TL / ​The LNK3696G-TL is an energy-efficient, low-power off-line switcher IC from Power Integrations, designed for applications requiring minimal component count and robust system-level protection. It integrates a 900 V power MOSFET, oscillator, ON/OFF control scheme, high-voltage switched current source, frequency jittering, cycle-by-cycle current limit, and thermal shutdown circuitry into a single monolithic IC. This integration simplifies design and reduces external component requirements. The device offers selectable current limit options and features fully integrated auto-restart functionality for short-circuit and open-loop protection. Its frequency jittering mechanism significantly reduces electromagnetic interference (EMI), and it meets high-voltage creepage requirements between the DRAIN pin and all other pins, both on the PCB and at the package level. The LNK3696G-TL operates over an input voltage range of 85 V to 265 V AC and delivers up to 8 W of output power, making it suitable for applications such as flyback converters, appliance power supplies, industrial systems, and metering devices. ​
LNK3696G-TL

Description: ​The LNK3696G-TL is an energy-efficient, low-power off-line switcher IC from Power Integ ...
Package: T&R | MOQ: 1000 | MPQ: 1000

MSP430F5510IPTR / ​The MSP430F5510IPTR is a mixed-signal microcontroller from Texas Instruments, featuring a 16-bit RISC CPU that operates up to 25 MHz, providing efficient processing capabilities for various applications. It comes equipped with 32 KB of flash memory and 4 KB of SRAM, offering ample storage for program code and data. The microcontroller includes a high-performance 10-bit ADC with multiple channels, facilitating precise analog-to-digital conversions. It also offers integrated peripherals such as a hardware multiplier for efficient mathematical operations, DMA channels for data transfer, and multiple communication interfaces including UART, SPI, I2C, and USB, enhancing its versatility in different communication scenarios. Operating within a supply voltage range of 1.8 V to 3.6 V, the MSP430F5510IPTR is housed in a 48-pin LQFP package, making it suitable for space-constrained applications. ​
MSP430F5510IPTR

Description: ​The MSP430F5510IPTR is a mixed-signal microcontroller from Texas Instruments, featuring ...
Package: T&R | MOQ: 1000 | MPQ: 1000

ISO6731DWR / ​The ISO6731DWR is a high-performance, triple-channel digital isolator from Texas Instruments, designed to provide robust electromagnetic compatibility (EMC) and electrical isolation for digital signals in various applications. It features two forward-direction channels and one reverse-direction channel, facilitating flexible data communication configurations. The device operates over a supply voltage range of 2.25 V to 5.5 V and supports data rates up to 50 Mbps, ensuring efficient and reliable signal transmission. With an isolation voltage rating of 5000 Vrms per UL 1577, the ISO6731DWR offers reinforced isolation, protecting sensitive circuitry from voltage spikes and transients. It also boasts a high common-mode transient immunity (CMTI) of 50 kV/µs, making it suitable for environments with significant electrical noise. Housed in a 16-pin SOIC package, the ISO6731DWR is ideal for applications requiring robust isolation, such as industrial control systems, data communications, and automotive electronics. ​
ISO6731DWR

Description: ​The ISO6731DWR is a high-performance, triple-channel digital isolator from Texas Instru ...
Package: T&R | MOQ: 2000 | MPQ: 2000

CC1190RGVR / ​The CC1190RGVR is a high-performance RF front-end module from Texas Instruments, designed to enhance the range and sensitivity of wireless systems operating in the 850 to 950 MHz frequency range. It integrates a power amplifier (PA), low-noise amplifier (LNA), switches, and RF matching components into a compact 4 mm x 4 mm QFN-16 package. This integration simplifies design and reduces the need for external components. The CC1190RGVR offers up to 27 dBm (0.5 W) output power, significantly extending transmission range, and provides a 6 dB typical improvement in receiver sensitivity when used with Texas Instruments CC11xx and CC430 series transceivers. It operates efficiently over a supply voltage range of 2.0 V to 3.7 V, with a low receive current consumption of 3 mA in high-gain mode and a power-down mode consuming only 50 nA when both the LNA and PA are disabled. These features make the CC1190RGVR suitable for various applications, including wireless sensor networks, industrial systems, IEEE 802.15.4 systems, consumer electronics, wireless metering, and smart grid wireless networks. ​
CC1190RGVR

Description: ​The CC1190RGVR is a high-performance RF front-end module from Texas Instruments, design ...
Package: T&R | MOQ: 2500 | MPQ: 2500

R5F10MMEDFB#30 / ​The R5F10MMEDFB#30 is a 16-bit microcontroller from Renesas Electronics, part of the RL78/I1B series, designed for low-power and high-performance applications. Operating at a maximum frequency of 24 MHz, it integrates 64 KB of flash memory and 6 KB of RAM. The microcontroller supports a supply voltage range from 1.9 V to 5.5 V and is housed in an 80-pin LQFP package measuring 12 mm x 12 mm. It offers a range of peripherals, including a brown-out detect/reset, LCD controller, low-voltage detection, power-on reset, pulse-width modulation, and watchdog timer. With an operating temperature range of -40°C to +85°C, the R5F10MMEDFB#30 is suitable for various embedded applications requiring reliable performance in diverse environmental conditions.​
R5F10MMEDFB#30

Description: ​The R5F10MMEDFB#30 is a 16-bit microcontroller from Renesas Electronics, part of the RL ...
Package: TRAY | MOQ: 119 | MPQ: 119

DRV5032FBDBZR / ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas Instruments, designed for compact and battery-sensitive applications. Operating within a supply voltage range of 1.65 V to 5.5 V, it features a typical power consumption of 0.54 µA at a 5-Hz sampling rate. This omnipolar sensor responds to both north and south magnetic fields, with an operate point (BOP) of ±4.8 mT and a release point (BRP) of ±3 mT, resulting in a hysteresis (BHYS) of 1.5 mT. The device provides a push-pull output configuration and is housed in a 3-pin SOT-23 package. With an operating temperature range from –40°C to +85°C, the DRV5032FBDBZR is suitable for various applications, including battery-critical position sensing, portable electronics, and contactless activation systems. ​
DRV5032FBDBZR

Description: ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas In ...
Package: T&R | MOQ: 3000 | MPQ: 3000

R7FA4M2AD3CFP#AA0 / ​The R7FA4M2AD3CFP is a 32-bit microcontroller from Renesas Electronics, featuring an ARM® Cortex®-M33 core operating at up to 100 MHz. It offers 512 KB of code flash memory, 8 KB of data flash memory, and 128 KB of SRAM. The microcontroller supports various connectivity options, including CANbus, I2C, QSPI, SCI, SPI, UART/USART, and USB. It also includes peripherals such as a 12-bit ADC with 13 channels, two 12-bit DACs, temperature sensor, and multiple timers. Security features comprise a Secure Crypto Engine supporting AES, RSA, and SHA algorithms, along with Arm® TrustZone® technology. Operating within a supply voltage range of 2.7 V to 3.6 V and a temperature range of -40°C to 105°C, it is housed in a 100-LQFP package measuring 14x14 mm. ​
R7FA4M2AD3CFP#AA0

Description: ​The R7FA4M2AD3CFP is a 32-bit microcontroller from Renesas Electronics, featuring an AR ...
Package: TRAY | MOQ: 360 | MPQ: 90

TLV70433DBVR / The TLV70433DBVR is a low-dropout (LDO) linear voltage regulator from Texas Instruments, designed for applications requiring low power consumption and high efficiency. It operates over a wide input voltage range of 2.5 V to 24 V, with a maximum of 30 V for newer versions, and provides a fixed output voltage of 3.3 V. The regulator supports an output current of up to 150 mA, making it suitable for powering low-current devices. Notably, it features an ultra-low quiescent current of approximately 3.4 µA at a 100-mA load, enhancing battery life in portable applications. The device offers a typical dropout voltage of 850 mV at 100 mA load current, ensuring efficient operation even with minimal input-output voltage differentials. It maintains stability with output capacitors of 0.47 µF or greater and includes built-in overcurrent protection to safeguard against excessive load conditions. Packaged in a compact 5-pin SOT-23 (DBV) form factor, the TLV70433DBVR operates over an ambient temperature range of –40°C to +125°C, making it ideal for applications such as battery-powered equipment, portable electronics, and low-power microcontrollers.
TLV70433DBVR

Description: The TLV70433DBVR is a low-dropout (LDO) linear voltage regulator from Texas Instruments, d ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TLV9004IDR / ​The TLV9004IDR is a quad-channel, low-power operational amplifier from Texas Instruments, designed for cost-sensitive applications requiring low-voltage operation and high capacitive-load driving capabilities. Operating within a supply voltage range of 1.8 V to 5.5 V, it features rail-to-rail input and output swings, enhancing its versatility in various designs. Key specifications include a unity-gain bandwidth of 1 MHz, a slew rate of 2 V/µs, low input offset voltage of ±0.4 mV, and a low quiescent current of 60 µA per channel. Additionally, it boasts a low input bias current of 5 pA and a low broadband noise of 27 nV/√Hz, contributing to its high performance in noise-sensitive applications. The amplifier is unity-gain stable and incorporates an internal RFI and EMI filter, ensuring robust operation in environments with radio-frequency interference. Its design facilitates easier stabilization with higher capacitive loads due to its resistive open-loop output impedance. The TLV9004IDR operates over an extended temperature range of –40°C to 125°C and is available in a 14-pin SOIC package, making it suitable for space-constrained applications such as smoke detectors, wearable electronics, and small appliances. ​
TLV9004IDR

Description: ​The TLV9004IDR is a quad-channel, low-power operational amplifier from Texas Instrument ...
Package: T&R | MOQ: 2500 | MPQ: 2500

STM32F302R8T6 / The STM32F302R8T6 is a high-performance 32-bit ARM® Cortex®-M4 microcontroller with a built-in Floating Point Unit (FPU), designed for real-time control applications. It operates at a clock speed of up to 72 MHz, offering excellent processing power for signal processing and control tasks. The MCU features 64 KB of Flash memory and 16 KB of SRAM, providing ample storage for firmware and data. It integrates multiple communication interfaces, including I²C, SPI, USART, and CAN, making it highly adaptable for industrial and consumer applications. A key highlight of the STM32F302R8T6 is its advanced analog capabilities, featuring four fast 12-bit ADCs, a 12-bit DAC, and multiple comparators and operational amplifiers, making it ideal for motor control and precision sensing applications. The rich set of timers, including high-resolution PWM timers and advanced motor control timers, enables precise motion control. It supports both single- and dual-channel quadrature encoders, enhancing its suitability for robotics and automation. With a wide operating voltage range (2.0V to 3.6V), low-power modes, and temperature operation from -40°C to +85°C, the STM32F302R8T6 is robust and power-efficient. Its LQFP-64 package offers a compact and easy-to-integrate form factor. The microcontroller is supported by STM32Cube firmware and development tools, simplifying software development and system integration for a broad range of embedded applications.
STM32F302R8T6

Description: The STM32F302R8T6 is a high-performance 32-bit ARM® Cortex®-M4 microcontroller with a bu ...
Package: TRAY | MOQ: 320 | MPQ: 160

STSPIN32F0A / The STSPIN32F0A is an advanced motor controller and driver that integrates an STM32F0 microcontroller with a three-phase gate driver for efficient and compact motor control applications. It features an embedded 32-bit ARM® Cortex®-M0 core, providing high-performance processing for real-time motor control algorithms. The device includes six dedicated MOSFET gate drivers, allowing it to drive various motor types, including BLDC (Brushless DC) and PMSM (Permanent Magnet Synchronous Motors). The STSPIN32F0A supports sensorless and sensored motor control techniques using Field-Oriented Control (FOC) or six-step control, making it versatile for industrial and consumer applications. It operates with a wide voltage range (6.5V to 45V), ensuring compatibility with different power supply configurations. The integrated buck converter (3.3V) enables power savings and efficient peripheral management. Additional features include overcurrent protection (OCP), undervoltage lockout (UVLO), thermal shutdown (TSD), and cross-conduction prevention, ensuring system safety and reliability. With its compact design, built-in diagnostic functions, and support for SPI, UART, and I²C interfaces, the STSPIN32F0A is an excellent choice for industrial automation, robotics, power tools, and home appliances. Its combination of processing power and motor control capabilities makes it a cost-effective and space-saving solution for modern motor-driven applications.
STSPIN32F0A

Description: The STSPIN32F0A is an advanced motor controller and driver that integrates an STM32F0 micr ...
Package: TRAY | MOQ: 520 | MPQ: 260

IIS2DHTR / The IIS2DHTR is a high-performance ultra-low-power 2-axis digital accelerometer designed for industrial and consumer applications. It features a wide full-scale range of ±2g, ±4g, ±8g, and ±16g, allowing precise motion sensing across various applications. The device boasts a low power consumption mode, making it ideal for battery-powered devices. With its high-resolution 16-bit output and embedded temperature sensor, it ensures accurate and reliable data acquisition. The integrated FIFO buffer minimizes power consumption by reducing the need for frequent processor interaction. It also supports wake-up and free-fall detection, as well as tilt, activity/inactivity, and motion detection, enhancing its usability in IoT, wearable, and industrial monitoring systems. Additionally, the I²C/SPI digital interfaces enable seamless integration with microcontrollers. The embedded self-test feature ensures device reliability, while its compact LGA package makes it suitable for space-constrained designs.
IIS2DHTR

Description: The IIS2DHTR is a high-performance ultra-low-power 2-axis digital accelerometer designed f ...
Package: T&R | MOQ: 1000 | MPQ: 8000

IIS2MDCTR / ​The IIS2MDCTR is a high-accuracy, ultra-low-power 3-axis digital magnetometer from STMicroelectronics, designed for precise magnetic field measurements in various applications. It offers a magnetic field dynamic range up to ±50 gauss and delivers 16-bit data output. The sensor supports both I²C and SPI interfaces, accommodating standard, fast mode, fast mode plus, and high-speed communications at frequencies of 100 kHz, 400 kHz, 1 MHz, and 3.4 MHz. Operating within a supply voltage range of 1.71 V to 3.6 V, the IIS2MDCTR is suitable for battery-powered devices. It features an embedded temperature sensor, programmable interrupt generator for magnetic field detection, and self-test capability. The device is housed in a compact 12-lead LGA package measuring 2 mm x 2 mm x 0.7 mm and operates over an extended temperature range from -40°C to +85°C. These characteristics make the IIS2MDCTR ideal for applications such as compasses in inertial measurement units (IMUs), presence detection, and variable magnetic field monitoring. ​
IIS2MDCTR

Description: ​The IIS2MDCTR is a high-accuracy, ultra-low-power 3-axis digital magnetometer from STMi ...
Package: T&R | MOQ: 1000 | MPQ: 10000

MPXHZ6130A6U / ​The MPXHZ6130A6U is an integrated absolute pressure sensor from NXP Semiconductors, designed for applications requiring precise pressure measurements in challenging environments. It combines on-chip bipolar op amp circuitry with thin-film resistor networks to deliver a high-level analog output signal that is temperature compensated. The sensor operates within a pressure range of 15 kPa to 130 kPa (2.18 PSI to 18.85 PSI) and provides an output voltage between 0.2 V and 4.8 V, proportional to the applied pressure. With an accuracy of ±1.5% over a temperature range of -40°C to +125°C, it ensures reliable performance in extreme conditions. The MPXHZ6130A6U is resistant to high humidity and common automotive media, making it suitable for automotive, aviation, and industrial applications. Its compact 8-pin SOIC package facilitates easy integration into microprocessor or microcontroller-based systems. ​
MPXHZ6130A6U

Description: ​The MPXHZ6130A6U is an integrated absolute pressure sensor from NXP Semiconductors, des ...
Package: TUBE | MOQ: 260 | MPQ: 65

MMPF0100F0AEP / The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors, designed to efficiently regulate power in embedded systems, particularly for i.MX 6 processors and similar applications. It features multiple high-efficiency buck regulators, a boost regulator, and six linear regulators (LDOs), making it ideal for complex power architectures. The device supports dynamic voltage scaling (DVS), allowing power optimization based on system demand, and includes programmable power-up sequencing, standby modes, and OTP memory configuration. With a switching frequency of up to 4 MHz, it ensures minimal noise and efficient operation. Built-in protection features such as thermal shutdown, current limiting, and short-circuit protection enhance system reliability. Operating within a 2.8 V to 4.5 V input range, the PMIC is well-suited for industrial control, medical devices, smart home applications, and portable electronics. Its compact 56-pin HVQFN package (8 mm × 8 mm) ensures a small footprint while providing extensive power management capabilities.
MMPF0100F0AEP

Description: The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors ...
Package: TRAY | MOQ: 520 | MPQ: 260

LPC1768FBD100,551 / ​The LPC1768FBD100,551 is a microcontroller from NXP Semiconductors, part of the LPC1700 series, designed for embedded applications requiring high performance and low power consumption. It features an ARM Cortex-M3 core operating at up to 100 MHz, with 512 KB of flash memory and 64 KB of SRAM. The microcontroller offers a wide range of peripherals, including USB 2.0, Ethernet, CAN, multiple UARTs, I²C, SPI interfaces, and a 12-bit ADC. It is housed in a 100-pin LQFP package and operates within a voltage range of 3.0 V to 3.6 V. This combination of features makes it suitable for applications such as industrial automation, consumer electronics, and communication devices.​
LPC1768FBD100,551

Description: ​The LPC1768FBD100,551 is a microcontroller from NXP Semiconductors, part of the LPC1700 ...
Package: TRAY | MOQ: 180 | MPQ: 90

EP3C5E144C8N / The EP3C5E144C8N is a low-cost, high-performance FPGA from Altera Cyclone® III family, designed for power-efficient and flexible digital logic applications. Built on a 65 nm process technology, this FPGA offers 5,136 logic elements (LEs) and 423,936 embedded memory bits, making it suitable for applications requiring moderate processing power and memory resources. It operates within a 1.15 V to 1.25 V supply range and supports a maximum operating frequency of 315 MHz. The device is housed in a 144-pin EQFP package, providing 94 user I/O pins for flexible connectivity. With a surface-mount design (SMD/SMT) and RoHS compliance, it is ideal for various embedded systems, communications, and industrial applications. Its Moisture Sensitivity Level (MSL) 3 rating ensures reliable operation under controlled environmental conditions. The EP3C5E144C8N balances cost, performance, and power efficiency, making it a popular choice for designers looking for an affordable FPGA solution.
EP3C5E144C8N

Description: The EP3C5E144C8N is a low-cost, high-performance FPGA from Altera Cyclone® III family, de ...
Package: TRAY | MOQ: 120 | MPQ: 60

THVD1406DR / ​The THVD1406DR is a robust, half-duplex RS-485 transceiver from Texas Instruments, designed for industrial applications requiring reliable data transmission. It operates over a wide supply voltage range and features auto-direction control, simplifying communication protocols. ​
THVD1406DR

Description: ​The THVD1406DR is a robust, half-duplex RS-485 transceiver from Texas Instruments, desi ...
Package: T&R | MOQ: 3000 | MPQ: 3000

UCC28911DR / ​The UCC28911DR is an integrated flyback switcher from Texas Instruments, designed for off-line, low-power applications. It combines a 700 V power MOSFET with a current-mode controller, simplifying the design of isolated AC-DC converters. This device is particularly suitable for applications such as auxiliary power supplies, smart meters, and home appliances.​
UCC28911DR

Description: ​The UCC28911DR is an integrated flyback switcher from Texas Instruments, designed for o ...
Package: T&R | MOQ: 2500 | MPQ: 2500

DC010NG-S / The DC010NG-S is an N-Channel MOSFET developed by SHENZHEN DOINGTER SEMICONDUCTOR CO., LTD. It utilizes advanced trench technology to achieve low on-resistance (R_DS(on)) and reduced gate charge, enhancing its efficiency in various applications.
DC010NG-S

Description: The DC010NG-S is an N-Channel MOSFET developed by SHENZHEN DOINGTER SEMICONDUCTOR CO., LTD ...
Package: T&R | MOQ: 2000 | MPQ: 2000

TPS54232DR / ​The TPS54232DR is a step-down (buck) DC-DC converter from Texas Instruments, capable of delivering up to 2 A of continuous output current. It operates over an input voltage range of 3.5 V to 28 V and offers an adjustable output voltage from 0.8 V up to 25 V. The device features a fixed switching frequency of 1 MHz and incorporates Eco-Mode™ for improved efficiency at light loads. Protection mechanisms include cycle-by-cycle current limiting and thermal shutdown. The TPS54232DR is housed in an 8-pin SOIC package with PowerPAD™ for enhanced thermal performance. ​
TPS54232DR

Description: ​The TPS54232DR is a step-down (buck) DC-DC converter from Texas Instruments, capable of ...
Package: T&R | MOQ: 2500 | MPQ: 2500

M24M01-RMN6TP / ​The M24M01-RMN6TP is a 1 Mbit (128 K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) from STMicroelectronics, featuring an I²C interface. It is suitable for applications requiring non-volatile data storage with moderate speed and low power consumption.​
M24M01-RMN6TP

Description: ​The M24M01-RMN6TP is a 1 Mbit (128 K x 8) EEPROM (Electrically Erasable Programmable Re ...
Package: T&R | MOQ: 2500 | MPQ: 2500

AMC1106M05DWVR / The AMC1106M05DWVR is a precision delta-sigma (ΔΣ) modulator manufactured by Texas Instruments, designed for high-performance current sensing applications. It offers galvanic isolation between its input and output, making it suitable for measuring small differential voltages in noisy environments.​
AMC1106M05DWVR

Description: The AMC1106M05DWVR is a precision delta-sigma (ΔΣ) modulator manufactured by Texas Instr ...
Package: T&R | MOQ: 1000 | MPQ: 1000

AFE031AIRGZR / The AFE031AIRGZR is an analog front-end (AFE) IC from Texas Instruments, designed specifically for power line communication (PLC) applications. It integrates a transmit (Tx) and receive (Rx) signal chain, including a DAC, ADC, programmable gain amplifier (PGA), and filters, ensuring high-performance analog signal processing. The device features a high-efficiency power amplifier (PA) with up to 1.5A output current, enabling reliable signal transmission over power lines. It operates from a single 3.3V or 5V supply and supports various PLC modulation schemes such as FSK, SFSK, OFDM, and BPSK. The AFE031 also includes an SPI interface for configuration, low-power modes for energy efficiency, and an integrated thermal shutdown feature for protection. Its operating temperature range of -40°C to +85°C makes it suitable for industrial and smart grid applications.
AFE031AIRGZR

Description: The AFE031AIRGZR is an analog front-end (AFE) IC from Texas Instruments, designed specific ...
Package: T&R | MOQ: 2500 | MPQ: 2500

CY8CMBR3116-LQXIT / The CY8CMBR3116-LQXIT is a CapSense® capacitive touch controller from Infineon, designed for robust and power-efficient touch sensing applications. It supports up to 16 capacitive touch inputs, including proximity sensing, water tolerance, and glove touch support, making it ideal for consumer and industrial applications. The device features SmartSense™ Auto-Tuning, eliminating the need for manual tuning of touch sensitivity. It operates in an ultra-low-power mode, consuming minimal energy for battery-powered applications. The controller includes built-in LED drive capability, I²C communication interface, and programmable interrupt outputs for seamless integration into embedded systems. Operating at 1.71V to 5.5V and supporting temperatures from -40°C to +85°C, it ensures reliable performance in harsh environments.
CY8CMBR3116-LQXIT

Description: The CY8CMBR3116-LQXIT is a CapSense® capacitive touch controller from Infineon, designed ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MSP430F5419AIPZR / The MSP430F5419AIPZR is an ultra-low-power 16-bit microcontroller from Texas Instruments, designed for high-performance embedded applications. It features a powerful MSP430X CPU running at up to 25 MHz, with 128 KB of Flash memory and 8 KB of RAM for efficient data storage and execution. This MCU supports multiple low-power modes, enabling ultra-low energy consumption, making it ideal for battery-powered applications. It includes a 12-bit ADC, two USCI modules (supporting UART, SPI, and I²C), timers with PWM support, and multiple GPIOs for versatile interfacing. With an operating voltage range of 1.8V to 3.6V and an extended temperature range of -40°C to 85°C, it is well-suited for industrial, medical, and consumer electronics applications.
MSP430F5419AIPZR

Description: The MSP430F5419AIPZR is an ultra-low-power 16-bit microcontroller from Texas Instruments, ...
Package: T&R | MOQ: 1000 | MPQ: 1000

STM32WLE5CBU6TR / The STM32WLE5CBU6TR is a highly integrated ultra-low-power wireless microcontroller from STMicroelectronics, designed for LoRa®, (G)FSK, (G)MSK, and BPSK wireless communication in IoT applications. It features an Arm® Cortex®-M4 core with 256 KB Flash memory and 64 KB SRAM, providing efficient processing and storage. The device includes a multi-band Sub-GHz radio with support for global frequency bands, ensuring flexible connectivity. It operates from 1.8V to 3.6V, offering multiple low-power modes for energy-efficient operation. Additional features include high-performance analog peripherals like ADCs, DACs, and comparators, multiple timers, I²C, SPI, and USART interfaces, and integrated security features such as AES encryption and True Random Number Generator (TRNG), making it ideal for smart metering, asset tracking, and industrial IoT applications.
STM32WLE5CBU6TR

Description: The STM32WLE5CBU6TR is a highly integrated ultra-low-power wireless microcontroller from S ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MSP430FE4272IPMR / The MSP430FE4272IPMR is a low-power, mixed-signal microcontroller from Texas Instruments, designed for metering and sensing applications. It features a 16-bit RISC CPU for efficient processing, an ultra-low-power architecture for extended battery life, and an integrated FLL+ clock system for precise timing. The device includes 64KB of Flash memory, 2KB of RAM, and a hardware multiplier for fast calculations. It also offers multiple communication interfaces (SPI, I2C, UART), LCD drive capability, and a high-performance Sigma-Delta ADC for accurate signal measurements. With its low-power modes and embedded metering functions, it is ideal for smart meters and industrial applications.
MSP430FE4272IPMR

Description: The MSP430FE4272IPMR is a low-power, mixed-signal microcontroller from Texas Instruments, ...
Package: TRAY | MOQ: 1000 | MPQ: 1000

BQ29419PWR / The BQ29419PWR is a dedicated overvoltage protection IC designed to enhance the safety of lithium-ion and lithium-polymer battery packs. It offers reliable overvoltage detection for 2- to 4-cell configurations, preventing battery damage and improving safety. With a low power consumption design, fast response time, and high accuracy, this IC ensures robust performance without requiring additional components. Its compact TSOT-6 package makes it an ideal choice for space-constrained applications such as laptops, power tools, and other rechargeable battery-powered devices.
BQ29419PWR

Description: The BQ29419PWR is a dedicated overvoltage protection IC designed to enhance the safety of ...
Package: T&R | MOQ: 2000 | MPQ: 2000













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |