All Products
Accelerometer
ADC
Amplifier
Antenna
Audio IC
Battery Management
Buzzer
CAN Transceiver
Ceramic Capacitor
Circuit Protection
Color Sensor
Connector
Converter
CPLD
Current Sensor
DAC
Data Storage
Digital Potentiometer
Diode
DRAM
DSP
Earthquake Sensor
Electrolytic Capacitor
Ethernet Controller
Ethernet Module
Film Capacitor
FLASH
Flyback Controller
FPGA
Gas Sensor
Gate Driver
Hall Effect Sensor
Isolated Amplifier
LCD Display
LCD Driver
LED
LED Driver
Line Filter
Logic IC
Memory
Metering IC
Microcontroller
Motor Driver
OLED Display
OpAmp
Optical Sensor
Optocoupler
Oscillator
PHY
PLC IC
Port Expander
Power Switch
Pressure Sensor
Relay
Reset IC
RF & Wifi Module
RF Transceiver MCU
RFID
RS232 Transceiver
RS485 Transceiver
RTC Real Time Clock
SDRAM
SMPS Controller
Solid State Relay
Special IC
Tantalum Capacitor
Temperature Sensor
TH Sensor
Timer
Touch IC
Transformer
Transistor
Triac
TVS
USB UART
Varistor
Voltage Reference
Voltage Regulator
Wirewounded Inductor

MPX2010DP / 1.45PSI (10kPa) Pressure Sensor Differential Male - 0.19
MPX2010DP

Description: 1.45PSI (10kPa) Pressure Sensor Differential Male - 0.19" (4.93mm) Tube, Dual 0mV ~ 25mV ( ...
Package: TRAY | MOQ: 300 | MPQ: 100

MPX5700DP / The MPX5700DP is a differential silicon pressure sensor designed for accurate pressure measurement in industrial and embedded applications. It operates with a supply voltage range of 4.75 V to 5.25 V and measures pressure from 0 to 700 kPa (≈101.5 psi). The sensor provides an analog output voltage typically ranging from 0.2 V to 4.7 V proportional to the applied pressure.<br><br>It features built-in temperature compensation, calibration, and signal conditioning, ensuring stable and accurate readings with typical accuracy around ±2.5%. The device supports operation over a wide temperature range from -40°C to +125°C and includes dual barbed pressure ports for differential measurement.<br><br>The MPX5700DP is widely used in automotive systems, industrial control, medical devices, HVAC systems, and microcontroller-based pressure measurement applications requiring reliable analog output and high pressure range sensing.
MPX5700DP

Description: The MPX5700DP is a differential silicon pressure sensor designed for accurate pressure mea ...
Package: TRAY | MOQ: 300 | MPQ: 100

MPXV7007GC6U / Pressure Sensor ±1.02PSI (±7kPa) Compound Male - 0.13
MPXV7007GC6U

Description: Pressure Sensor ±1.02PSI (±7kPa) Compound Male - 0.13" (3.17mm) Tube 0.5 V ~ 4.5 V 8-SMD ...
Package: TUBE | MOQ: 320 | MPQ: 40

MPX2102ASX / Pressure Sensor 14.5PSI (100kPa) Absolute Male - 0.19
MPX2102ASX

Description: Pressure Sensor 14.5PSI (100kPa) Absolute Male - 0.19" (4.93mm) Tube 0 mV ~ 40 mV (10V) 4- ...
Package: TRAY | MOQ: 200 | MPQ: 100

MPXM2053GS / Pressure Sensor 7.25PSI (50kPa) Vented Gauge Male - 0.12
MPXM2053GS

Description: Pressure Sensor 7.25PSI (50kPa) Vented Gauge Male - 0.12" (2.97mm) Tube 0 mV ~ 40 mV (10V) ...
Package: TUBE | MOQ: 240 | MPQ: 60

MOC3063M / 6-Pin DIP Zero-Cross Triac Driver Optocoupler (600 Volt Peak) Triac Output 4170Vrms 1 Channel
MOC3063M

Description: 6-Pin DIP Zero-Cross Triac Driver Optocoupler (600 Volt Peak) Triac Output 4170Vrms 1 Chan ...
Package: TUBE | MOQ: 2000 | MPQ: 50

MJD127T4 / Darlington PNP Transistor BJT (Bipolar) 100V 8A 20W Surface Mount DPAK The MJD127T4 is suitable for applications requiring high current handling and voltage capabilities, such as audio amplifiers, power supplies, and motor control circuits. Its high DC current gain ensures efficient operation, while the monolithic construction with built-in base-emitter shunt resistors enhances thermal stability and reliability. The device wide operating temperature range makes it suitable for various industrial and commercial applications. The MJD127T4 is available in a DPAK package, facilitating surface-mount assembly.
MJD127T4

Description: Darlington PNP Transistor BJT (Bipolar) 100V 8A 20W Surface Mount DPAK The MJD127T4 is sui ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MJD122T4G / Darlington NPN Transistor BJT(Bipolar) 100V 8A 20W Surface Mount DPAK. The MJD122T4 is suitable for applications requiring high current handling and voltage capabilities, such as audio amplifiers, power supplies, and motor control circuits. Its high DC current gain ensures efficient operation, while the monolithic construction with a built-in base-emitter shunt resistor enhances thermal stability and reliability.
MJD122T4G

Description: Darlington NPN Transistor BJT(Bipolar) 100V 8A 20W Surface Mount DPAK. The MJD122T4 is sui ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MJ11016G / Darlington 120 V 30 A 4MHz 200 W Through Hole TO-204/TO-3, The MJ11016G is suitable for applications requiring high current handling and voltage capabilities, such as audio amplifiers, power supplies, and motor control circuits. Its high DC current gain ensures efficient operation, while the monolithic construction with a built-in base-emitter shunt resistor enhances thermal stability and reliability. The device wide operating temperature range makes it suitable for various industrial and commercial applications.
MJ11016G

Description: Darlington 120 V 30 A 4MHz 200 W Through Hole TO-204/TO-3, The MJ11016G is suitable for ap ...
Package: TRAY | MOQ: 1000 | MPQ: 100

MCP4728-E/UN / The MCP4728-E/UN is ideal for applications requiring multiple DAC channels with precise voltage outputs. Its non-volatile memory allows for the storage of DAC settings, ensuring immediate availability of outputs after power-up. The device offers flexibility with internal or external reference voltage options and operates over a wide supply voltage range, making it suitable for various portable and space-constrained designs. The 10-pin MSOP package facilitates easy integration into compact systems.
MCP4728-E/UN

Description: The MCP4728-E/UN is ideal for applications requiring multiple DAC channels with precise vo ...
Package: TUBE | MOQ: 1000 | MPQ: 100

L7812ABD2T-TR / The L7812ABD2T-TR is suitable for applications requiring a stable 12V power supply with a current up to 1.5A. Its thermal overload and short circuit protection features ensure reliable operation in various conditions.
L7812ABD2T-TR

Description: The L7812ABD2T-TR is suitable for applications requiring a stable 12V power supply with a ...
Package: T&R | MOQ: 1000 | MPQ: 1000

L7805ABD2T-TR / Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A The L7805ABD2T-TR is suitable for applications requiring a stable 5V power supply with a current up to 1.5A. Its thermal overload and short circuit protection features ensure reliable operation in various conditions. The device is housed in a D2PAK package, facilitating surface-mount assembly.
L7805ABD2T-TR

Description: Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A The L7805ABD2T-TR is suitable for ...
Package: T&R | MOQ: 1000 | MPQ: 1000

MC34063ACDTR / Buck, Boost Switching Regulator IC Positive or Negative Adjustable 1.25V 1 Output 1.5A (Switch) 8-SOIC The MC34063ACDTR is suitable for step-up, step-down, and voltage-inverting applications, offering versatility in power conversion designs. Its low quiescent current and wide operating voltage range make it ideal for battery-powered and portable devices. The device is housed in an 8-pin SOIC package, facilitating easy integration into various electronic systems.
MC34063ACDTR

Description: Buck, Boost Switching Regulator IC Positive or Negative Adjustable 1.25V 1 Output 1.5A (Sw ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MAX5477EUD+ / The MAX5477EUD+ offers precise resistance control with 256 discrete steps, enabling fine adjustments in signal processing and other applications. Its I²C interface allows for easy integration into digital systems, and its non-volatile memory ensures that the wiper positions are retained even after power-down. The device operates over a wide supply voltage range and is housed in a compact 14-TSSOP package, making it suitable for space-constrained designs.
MAX5477EUD+

Description: The MAX5477EUD+ offers precise resistance control with 256 discrete steps, enabling fine a ...
Package: TUBE | MOQ: 1056 | MPQ: 96

MAX485EPA / The MAX485EPA operates from a single 5V power supply and features a low quiescent current of 300 µA, making it suitable for power-sensitive applications. It supports half-duplex communication and includes fail-safe circuitry that ensures a logic high receiver output when the receiver input is open. The device is housed in an 8-pin PDIP package, facilitating easy integration into various designs.
MAX485EPA

Description: The MAX485EPA operates from a single 5V power supply and features a low quiescent current ...
Package: TUBE | MOQ: 1000 | MPQ: 50

MAX3362EKA+T / The MAX3362EKA is ideal for multidrop clock/data distribution applications, offering a guaranteed data rate of 20 Mbps and a low receiver input impedance that allows up to 256 transceivers on the bus. It features a hot-swap capability to prevent false transitions during circuit initialization and includes protection features such as current limiting and thermal shutdown. The device operates with a low supply current of 1.7 mA and offers a low-power shutdown mode reducing supply current to 1 µA. Its compact 8-pin SOT package makes it suitable for space-constrained designs.
MAX3362EKA+T

Description: The MAX3362EKA is ideal for multidrop clock/data distribution applications, offering a gua ...
Package: T&R | MOQ: 2500 | MPQ: 2500

MAX232DR / The MAX232DR operates from a single 5V power supply and utilizes on-chip charge pumps to generate the necessary RS-232 voltage levels, eliminating the need for dual power supplies. It is suitable for applications such as computer serial ports, industrial communication interfaces, and other systems requiring RS-232 communication. The device is available in a 16-pin SOIC package, making it suitable for surface-mount designs.
MAX232DR

Description: The MAX232DR operates from a single 5V power supply and utilizes on-chip charge pumps to g ...
Package: T&R | MOQ: 2500 | MPQ: 2500

M95010-WMN6TP / This EEPROM is suitable for applications requiring non-volatile memory storage with a high-speed SPI interface. Its compact SO8N package and low power consumption make it ideal for various electronic devices. Please note that the M95010-WMN6TP has been marked as Not Recommended for New Designs (NRND).
M95010-WMN6TP

Description: This EEPROM is suitable for applications requiring non-volatile memory storage with a high ...
Package: T&R | MOQ: 2500 | MPQ: 2500

M93C46-WMN6TP / The M93C46-WMN6TP is a 1Kbit EEPROM memory IC from STMicroelectronics, utilizing a Microwire serial interface. This EEPROM is suitable for applications requiring non-volatile memory storage with a simple serial interface. Its compact 8-SOIC package and low power consumption make it ideal for various electronic devices. M93C46-WMN6P
M93C46-WMN6TP

Description: The M93C46-WMN6TP is a 1Kbit EEPROM memory IC from STMicroelectronics, utilizing a Microwi ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LPT2270D-TB-03-2.0-20-12.5-R / LPT2270D1-TB-03-2.0-20-12.5-R Piezo Buzzer 3Vin (30Vmax), Less than 3ma Current
LPT2270D-TB-03-2.0-20-12.5-R

Description: LPT2270D1-TB-03-2.0-20-12.5-R Piezo Buzzer 3Vin (30Vmax), Less than 3ma Current ...
Package: TRAY | MOQ: 1000 | MPQ: 1000

LMC6442AIM/NOPB / The LMC6442AIM/NOPB is ideal for battery-powered systems requiring minimal power consumption and rail-to-rail output swing. Its ultra-low supply current of less than one microamp per amplifier makes it suitable for applications such as smoke detectors, gas detectors, and communication systems, ensuring extended service life in single or two-cell battery configurations. The compact 8-SOIC package is well-suited for space-constrained designs.
LMC6442AIM/NOPB

Description: The LMC6442AIM/NOPB is ideal for battery-powered systems requiring minimal power consumpti ...
Package: TUBE | MOQ: 1045 | MPQ: 95

LM393DR / The LM393DR features a wide supply voltage range and low input bias current, making it suitable for various applications such as zero-crossing detectors, voltage comparators, and pulse-width modulation. Its open-collector output allows for wired-AND configurations and interfacing with various logic families. The device is housed in a compact 8-SOIC package, ideal for space-constrained designs.
LM393DR

Description: The LM393DR features a wide supply voltage range and low input bias current, making it sui ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM358DR / The LM358DR offers a wide supply voltage range and low input bias current, making it suitable for various applications such as signal conditioning, filtering, and amplification in both industrial and consumer electronics. Its low power consumption and compact 8-SOIC package make it ideal for space-constrained designs.
LM358DR

Description: The LM358DR offers a wide supply voltage range and low input bias current, making it suita ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM324DR / Operational Amplifiers, Supply range: 3V to 36V, Low input offset voltage: ±2mV
LM324DR

Description: Operational Amplifiers, Supply range: 3V to 36V, Low input offset voltage: ±2mV ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM2907M-8/NOPB / Frequency to Voltage Converter IC 10 kHz ±0.3%
LM2907M-8/NOPB

Description: Frequency to Voltage Converter IC 10 kHz ±0.3% ...
Package: TUBE | MOQ: 1045 | MPQ: 95

LM2904AQS-13 / The <strong>LM2904AQS-13</strong> is a high-reliability <strong>dual operational amplifier</strong> developed by <strong>Diodes Incorporated</strong>, designed for automotive, industrial, and general-purpose analog applications requiring stable performance and low power consumption. It integrates two independent high-gain op-amps within a single compact package, enabling flexible analog signal processing. <br><br>The device operates over a wide supply voltage range of <strong>3V to 36V (single supply)</strong> or <strong>±1.5V to ±18V (dual supply)</strong>, providing excellent versatility for various circuit designs. It features a <strong>gain bandwidth product of approximately 700kHz</strong> and a <strong>slew rate of 0.3V/µs</strong>, making it suitable for low-frequency amplification and signal conditioning applications. <br><br>The LM2904AQS-13 offers <strong>low input offset voltage (typ. 1mV)</strong> and <strong>low input bias current</strong>, ensuring accurate signal amplification and reduced error in precision circuits. Its architecture supports input common-mode voltage down to ground, allowing operation in single-supply configurations without additional biasing. <br><br>Designed for robust environments, the device is <strong>AEC-Q100 qualified</strong> and operates across an extended temperature range of <strong>-40°C to +125°C</strong>, making it suitable for automotive and industrial applications requiring high reliability and long-term stability. <br><br>Housed in a compact <strong>8-pin SOIC surface-mount package</strong>, the LM2904AQS-13 enables efficient PCB layout and space-saving designs. It is widely used in <strong>signal conditioning, sensor interfaces, automotive electronics, power management circuits, and general-purpose analog amplification systems</strong> where dependable dual op-amp performance is required.
LM2904AQS-13

Description: The LM2904AQS-13 is a high-reliability dual operational amplifier ...
Package: T&R | MOQ: 2500 | MPQ: 2500

LM2594HVM-5.0/NOPB / Buck Switching Regulator IC Positive Fixed 5V 1 Output 500mA 8-SOIC, 4.5-60V, 5V 500mA
LM2594HVM-5.0/NOPB

Description: Buck Switching Regulator IC Positive Fixed 5V 1 Output 500mA 8-SOIC, 4.5-60V, 5V 500mA ...
Package: TUBE | MOQ: 1045 | MPQ: 95

LM2574M-5.0/NOPB / Buck Switching Regulator IC Positive Fixed 5V 1 Output 500mA 14-SOIC 52kHz 4-40V, 5Vout
LM2574M-5.0/NOPB

Description: Buck Switching Regulator IC Positive Fixed 5V 1 Output 500mA 14-SOIC 52kHz 4-40V, 5Vout ...
Package: TUBE | MOQ: 1000 | MPQ: 50

LM1085ISX-ADJ/NOPB / Linear Voltage Regulator IC Positive Adjustable 1 Output 3A TO-263-3, 75dB (120Hz) PSSR
LM1085ISX-ADJ/NOPB

Description: Linear Voltage Regulator IC Positive Adjustable 1 Output 3A TO-263-3, 75dB (120Hz) PSSR ...
Package: T&R | MOQ: 1500 | MPQ: 500

L7812CV / Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-220, 2V @1A (Typ) Voltage Dropout (Max), 12Vo
L7812CV

Description: Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-220, 2V @1A (Typ) Voltage Drop ...
Package: TUBE | MOQ: 2000 | MPQ: 50

L7805CV / The L7805CV is a fixed 5 V linear voltage regulator from STMicroelectronics belonging to the widely used 78xx regulator series. It is designed to provide a stable 5 V output voltage with an input voltage range typically up to 35 V, making it suitable for a wide variety of power regulation applications. The device can deliver output currents up to 1.5 A with adequate heat dissipation and features internal current limiting, thermal shutdown protection, and safe operating area protection for improved reliability. The regulator requires minimal external components and provides good line and load regulation. Packaged in the robust TO-220 package, the L7805CV is commonly used in power supplies for embedded systems, microcontroller circuits, consumer electronics, industrial control systems, and general electronic projects where a stable 5 V supply is required.
L7805CV

Description: The L7805CV is a fixed 5 V linear voltage regulator from STMicroelectronics belonging to t ...
Package: TUBE | MOQ: 1000 | MPQ: 50

L6206PD / Half Bridge (4) Driver DC Motors, Stepper Motors, Voltage Regulators BCDMOS PowerSO-36 Slug Up
L6206PD

Description: Half Bridge (4) Driver DC Motors, Stepper Motors, Voltage Regulators BCDMOS PowerSO-36 Slu ...
Package: TUBE | MOQ: 1023 | MPQ: 31

E-L6219DS013TR / The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.
E-L6219DS013TR

Description: The L6219 is a bipolar monolithic integrated circuits intended to control and drive both w ...
Package: T&R | MOQ: 1000 | MPQ: 1000

L293DD / Bipolar Motor Driver Parallel 20-SOIC, 600mA, 4.5V ~ 36V, Parallel, Half Bridge (4)
L293DD

Description: Bipolar Motor Driver Parallel 20-SOIC, 600mA, 4.5V ~ 36V, Parallel, Half Bridge (4) ...
Package: TUBE | MOQ: 2000 | MPQ: 40

L293B / Bipolar Motor Driver Parallel, Driver - Fully Integrated, Control and Power Stage, Half Bridge (4)
L293B

Description: Bipolar Motor Driver Parallel, Driver - Fully Integrated, Control and Power Stage, Half Br ...
Package: TUBE | MOQ: 2500 | MPQ: 25

ITS4140NHUMA1 / Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, 1Ohm RDSon
ITS4140NHUMA1

Description: Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, ...
Package: T&R | MOQ: 4000 | MPQ: 4000

ISO7220ADR / General Purpose Digital Isolator 2500Vrms 2 Channel 1Mbps 25kV/µs CMTI 8-SOIC (0.154
ISO7220ADR

Description: General Purpose Digital Isolator 2500Vrms 2 Channel 1Mbps 25kV/µs CMTI 8-SOIC (0.154", 3. ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ISO3082DWR / 2/2 Transceiver, Isolated Half RS422, RS485 16-SOIC, 3.15V ~ 5.5V, 4.5V ~ 5.5V, 200kbps, 30 mV
ISO3082DWR

Description: 2/2 Transceiver, Isolated Half RS422, RS485 16-SOIC, 3.15V ~ 5.5V, 4.5V ~ 5.5V, 200kbps, 3 ...
Package: T&R | MOQ: 2000 | MPQ: 2000

ISO124U / Isolation Amplifier 1 Circuit 28-SOIC(8 Leads)
ISO124U

Description: Isolation Amplifier 1 Circuit 28-SOIC(8 Leads) ...
Package: TUBE | MOQ: 1000 | MPQ: 20

ISL3232EIRZ-T7A / 2/2 Transceiver Full RS232 16-QFN (5*5mm), 500mV, 250kbps
ISL3232EIRZ-T7A

Description: 2/2 Transceiver Full RS232 16-QFN (5*5mm), 500mV, 250kbps ...
Package: T&R | MOQ: 250 | MPQ: 250

IS61WV25616BLL-10TLI-TR / SRAM - Asynchronous Memory IC 4Mbit Parallel 10 ns 44-TSOP, 4Mbit, 256K*16
IS61WV25616BLL-10TLI-TR

Description: SRAM - Asynchronous Memory IC 4Mbit Parallel 10 ns 44-TSOP, 4Mbit, 256K*16 ...
Package: T&R | MOQ: 1000 | MPQ: 1000

IRS2106SPBF / High-Side or Low-Side Gate Driver IC Non-Inverting 8-SOIC, 290mA, 600mA, 10V ~ 20V
IRS2106SPBF

Description: High-Side or Low-Side Gate Driver IC Non-Inverting 8-SOIC, 290mA, 600mA, 10V ~ 20V ...
Package: TUBE | MOQ: 1045 | MPQ: 95

TSSP4038 / Remote Receiver Sensor 38.0kHz 2m PCB, Through Hole, 2.5V~5.5V, 700 µA, 2m
TSSP4038

Description: Remote Receiver Sensor 38.0kHz 2m PCB, Through Hole, 2.5V~5.5V, 700 µA, 2m ...
Package: TUBE | MOQ: 1080 | MPQ: 90

TSOP6238TT / The TSOP6238TT is a compact <strong>infrared (IR) receiver module</strong> developed by <strong>Vishay Semiconductors</strong>, designed for reliable signal reception in remote control and infrared communication systems. It is optimized for a <strong>38kHz carrier frequency</strong>, making it compatible with widely used IR remote control protocols. <br><br>The device integrates a <strong>PIN photodiode and preamplifier in a single package</strong>, along with an internal filter that improves noise immunity against ambient light sources such as lamps, displays, and wireless interference. <br><br>Operating within a supply voltage range of <strong>2.5V to 5.5V</strong>, the TSOP6238TT offers low power consumption and stable performance, making it suitable for battery-powered and embedded applications. It typically supports transmission distances up to <strong>40 meters</strong> under optimal conditions. <br><br>The module provides a <strong>demodulated digital output signal</strong> that can be directly interfaced with microcontrollers, eliminating the need for additional decoding circuitry. Its design ensures <strong>high immunity to electrical and optical noise</strong>, enabling reliable operation in various environments. <br><br>Packaged in a <strong>compact 4-pin SMD form factor (top-view orientation)</strong>, the TSOP6238TT is optimized for automated assembly and space-constrained PCB layouts. <br><br>The <strong>TSOP6238TT</strong> is widely used in applications such as <strong>TV and consumer electronics remote controls, IR communication systems, set-top boxes, home appliances, and embedded control systems</strong>, where accurate and noise-resistant infrared signal reception is required.
TSOP6238TT

Description: The TSOP6238TT is a compact infrared (IR) receiver module developed by ...
Package: T&R | MOQ: 1190 | MPQ: 1190

IRL540NPBF / N-Channel 100V 36A 140W Through Hole TO-220-3, 44mOhm @18A, 10V
IRL540NPBF

Description: N-Channel 100V 36A 140W Through Hole TO-220-3, 44mOhm @18A, 10V ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IRL1004PBF / Fifth Generation HEXFET® power MOSFETs from International Rectifier utilize advanced processing techniques to achieve the lowest possible on-resistance per silicon area.
IRL1004PBF

Description: Fifth Generation HEXFET® power MOSFETs from International Rectifier utilize advanced proc ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IRFZ44NPBF / The IRFZ44N is an N-channel power MOSFET designed for high-current switching applications. It features a drain-source voltage rating of 55 V and a continuous drain current up to 49 A under proper thermal conditions. The device offers low on-resistance (Rds(on)) typically around 0.017–0.028 Ω, enabling efficient power switching with reduced conduction losses. It requires a gate drive voltage of around 10 V for optimal performance and provides fast switching characteristics suitable for high-frequency applications. The IRFZ44N is commonly used in motor control, DC-DC converters, power supplies, inverters, and switching circuits in industrial and consumer electronic systems.
IRFZ44NPBF

Description: The IRFZ44N is an N-channel power MOSFET designed for high-current switching applications. ...
Package: TUBE | MOQ: 1000 | MPQ: 50

IRFPG50PBF / N-Channel 1000V 6.1A 190W Through Hole TO-247-3, 2Ohm @3.6A 10V Rds On (Max) @ Id, Vgs
IRFPG50PBF

Description: N-Channel 1000V 6.1A 190W Through Hole TO-247-3, 2Ohm @3.6A 10V Rds On (Max) @ Id, Vgs ...
Package: TUBE | MOQ: 1000 | MPQ: 25

IRFP460APBF / N-Channel 500V 20A 280W Through Hole TO-247-3, 4V @250µA
IRFP460APBF

Description: N-Channel 500V 20A 280W Through Hole TO-247-3, 4V @250µA ...
Package: TUBE | MOQ: 1000 | MPQ: 25

IRFP450APBF / N-Channel 500V 14A 190W Through Hole TO-247-3, 4V @250µA Vgs(th), 400mOhm @8.4A 10VRds On (Max)
IRFP450APBF

Description: N-Channel 500V 14A 190W Through Hole TO-247-3, 4V @250µA Vgs(th), 400mOhm @8.4A 10VRds On ...
Package: TUBE | MOQ: 1000 | MPQ: 25

IRFP4321PBF / N-Channel 150V 78A 310W Through Hole TO-247-3, 5V @250µA
IRFP4321PBF

Description: N-Channel 150V 78A 310W Through Hole TO-247-3, 5V @250µA ...
Package: TUBE | MOQ: 1000 | MPQ: 25













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |