All Products Power Switch

AUIPS6041GTR / The AUIPS6041GTR is an automotive-grade <strong>intelligent high-side power switch</strong> developed by <strong>Infineon Technologies</strong>, designed for controlling resistive, inductive, and capacitive loads in harsh environments. It belongs to the PROFET™ family and integrates advanced protection and diagnostic features within a compact IC. <br><br>This device features a <strong>single-channel N-channel high-side configuration</strong> with a typical output current capability of approximately <strong>1.6A</strong>, making it suitable for driving relays, solenoids, lamps, and other automotive loads. It operates over a load voltage range of <strong>6V to 28V</strong>, supporting standard automotive supply systems. <br><br>The AUIPS6041GTR offers a low <strong>RDS(on) of approximately 110–130 mΩ</strong>, ensuring efficient power delivery with reduced heat dissipation. Its integrated architecture eliminates the need for external protection components, simplifying PCB design and improving system reliability. <br><br>Designed for robustness, the device includes comprehensive protection mechanisms such as <strong>current limiting, over-temperature shutdown with auto-restart, open-load detection, short-circuit protection, and reverse battery protection</strong>. These features ensure safe operation even under fault conditions. <br><br>The IC also provides <strong>diagnostic feedback via a dedicated pin</strong>, allowing system controllers to detect fault conditions and improve system monitoring capabilities. Its high immunity to electrical noise and transient conditions makes it suitable for demanding automotive environments. <br><br>Qualified to <strong>AEC-Q100 standards</strong>, the AUIPS6041GTR operates over a wide temperature range of <strong>-40°C to +150°C</strong>, ensuring reliable performance in extreme conditions. <br><br>Packaged in a compact <strong>SOIC-8 surface-mount package</strong>, the AUIPS6041GTR is ideal for space-constrained automotive and industrial designs. <br><br>The <strong>AUIPS6041GTR</strong> is widely used in <strong>automotive body electronics, load control systems, industrial automation, power distribution modules, and embedded control applications</strong>, where protected and intelligent high-side switching is required.
AUIPS6041GTR

Description: The AUIPS6041GTR is an automotive-grade intelligent high-side power switch ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TPS2111APWR / The TPS2111APWR is a compact <strong>autoswitching power multiplexer (power MUX)</strong> developed by <strong>Texas Instruments</strong>, designed to seamlessly select between two power sources in portable and embedded electronic systems. It enables reliable switching between sources such as a battery and an external adapter without interruption to the load. <br><br>This device features a <strong>dual-input, single-output architecture</strong> with integrated N-channel MOSFETs, supporting output currents up to approximately <strong>1.25A</strong>. It operates within a supply voltage range of <strong>2.8V to 5.5V</strong>, making it ideal for low-voltage digital and handheld applications. <br><br>The TPS2111APWR includes <strong>automatic and manual switching modes</strong>, allowing flexible system control. It also integrates <strong>adjustable current limiting</strong> and controlled output transition timing to reduce inrush current and protect system components during power source switching. <br><br>With a typical low <strong>on-resistance of approximately 84 mΩ</strong>, the device ensures efficient power delivery and minimal voltage drop. Built-in protection features include <strong>thermal shutdown, reverse current blocking, and cross-conduction prevention</strong>, enhancing system reliability in demanding environments. <br><br>The device consumes very low quiescent current (around <strong>55 µA typical</strong>), making it suitable for battery-powered designs where energy efficiency is critical. <br><br>Packaged in a space-saving <strong>8-pin TSSOP surface-mount package</strong>, the TPS2111APWR is optimized for compact PCB layouts and easy integration. <br><br>The <strong>TPS2111APWR</strong> is widely used in <strong>portable electronics, mobile devices, industrial handheld equipment, IoT systems, and embedded designs</strong>, where automatic and reliable power source selection is required.
TPS2111APWR

Description: The TPS2111APWR is a compact autoswitching power multiplexer (power MUX) ...
Package: T&R | MOQ: 2000 | MPQ: 2000

VND5025AK / The VND5025AK is a robust <strong>dual-channel high-side power driver IC</strong> developed by <strong>STMicroelectronics</strong>, designed for driving resistive, inductive, and capacitive loads in automotive and industrial applications. It is built using advanced <strong>VIPower™ M0-5 technology</strong>, providing high efficiency and integrated protection features. <br><br> This device features <strong>two independent high-side output channels</strong> capable of handling high current loads, with typical current limitation around <strong>41A</strong> and low on-resistance of approximately <strong>25 mΩ</strong>, ensuring efficient power delivery and reduced thermal losses. <br><br> The VND5025AK operates within a <strong>wide supply voltage range of 4.5V to 36V</strong>, making it suitable for automotive battery systems and industrial power environments. It includes an <strong>integrated analog current sense output</strong>, allowing real-time monitoring of load current for diagnostic and control purposes. <br><br> Designed for reliability, the device integrates comprehensive protection features such as <strong>overcurrent limitation, thermal shutdown with auto-restart, overvoltage clamp, undervoltage shutdown, reverse battery protection, and ESD protection</strong>, ensuring safe operation under fault conditions. <br><br> The IC also provides <strong>low standby current and optimized electromagnetic performance</strong>, making it suitable for noise-sensitive automotive electronics. Its architecture supports efficient switching of loads such as motors, relays, lamps, and LED systems. <br><br> Packaged in a compact <strong>PowerSSO-24 surface-mount package</strong>, the VND5025AK is optimized for high-power PCB layouts and thermal performance. <br><br> The <strong>VND5025AK</strong> is widely used in <strong>automotive electronics, body control modules, motor drivers, lighting systems, industrial automation, and power distribution applications</strong>, where reliable high-side switching and diagnostic capability are essential.
VND5025AK

Description: The VND5025AK is a robust dual-channel high-side power driver IC develope ...
Package: T&R | MOQ: 1225 | MPQ: 1225

A2982SLWTR-T / The A2982SLWTR-T is a versatile <strong>8-channel high-side source driver IC</strong> developed by <strong>Allegro MicroSystems</strong>, designed to interface low-level logic signals with high-current loads in industrial and embedded applications. It integrates <strong>eight independent driver outputs</strong> in a single package, simplifying circuit design and reducing component count. <br><br>This device supports <strong>output voltages up to 50V</strong> and provides up to <strong>500mA source current per channel</strong>, making it suitable for driving relays, solenoids, lamps, stepper motors, and LED loads. It utilizes a <strong>Darlington transistor array structure</strong>, enabling strong current amplification and reliable high-side switching performance. <br><br>The A2982SLWTR-T features <strong>TTL, CMOS, PMOS, and DTL compatible inputs</strong>, allowing direct interfacing with a wide range of logic devices including microcontrollers and digital ICs. It operates without requiring a dedicated logic supply, simplifying integration into various system architectures. <br><br>Designed for robustness, the IC includes <strong>transient-protected outputs</strong> and supports reliable operation across a temperature range of <strong>-20°C to +85°C</strong>, making it suitable for industrial environments. <br><br>The device is optimized for high-side switching applications where separate logic and load grounds are required, improving system flexibility and noise immunity. Its architecture enables efficient control of multiple loads from a single control interface. <br><br>Encapsulated in a compact <strong>20-pin SOIC wide-body surface-mount package</strong>, the A2982SLWTR-T is suitable for high-density PCB layouts while maintaining good thermal performance. <br><br>The <strong>A2982SLWTR-T</strong> is widely used in <strong>industrial automation, relay and solenoid driving, LED control systems, motor control circuits, and general-purpose high-side switching applications</strong>, where reliable multi-channel load driving is required.
A2982SLWTR-T

Description: The A2982SLWTR-T is a versatile 8-channel high-side source driver IC deve ...
Package: T&R | MOQ: 1000 | MPQ: 1000

LMG3410R070RWHR / The LMG3410R070RWHR is a highly advanced <strong>600V gallium nitride (GaN) power stage</strong> developed by <strong>Texas Instruments</strong>, integrating both a high-performance GaN FET and a dedicated gate driver in a single compact package. This integration simplifies design while significantly improving switching performance and efficiency compared to traditional silicon-based solutions. <br><br>Designed for high-voltage applications, the device features a typical <strong>70mΩ on-resistance</strong> and supports operation in systems powered from <strong>350V to 480V DC bus ranges</strong>, making it ideal for industrial and power conversion applications. <br><br>The LMG3410R070RWHR enables extremely fast switching speeds with capabilities up to approximately <strong>100V/ns transition rates</strong>, reducing switching losses and enabling higher efficiency designs. Its GaN technology offers <strong>zero reverse recovery charge</strong>, which can reduce switching losses by up to 80% compared to silicon MOSFETs, especially in hard-switched topologies. <br><br>Integrated protection features include <strong>overcurrent protection with fast response (<100ns), overtemperature shutdown, and undervoltage lockout</strong>, ensuring safe and reliable operation in demanding environments. These features enhance system robustness and reduce the need for additional external protection circuits. <br><br>The device is optimized for high-frequency operation and supports applications such as <strong>totem-pole PFC, LLC resonant converters, phase-shifted full-bridge converters, and high-efficiency DC-DC power supplies</strong>, where high power density and efficiency are critical. <br><br>Encapsulated in a thermally efficient <strong>32-pin VQFN surface-mount package (8mm × 8mm)</strong>, the LMG3410R070RWHR allows compact PCB layouts while maintaining excellent thermal performance. <br><br>The <strong>LMG3410R070RWHR</strong> is widely used in <strong>server power supplies, telecom infrastructure, industrial power systems, renewable energy converters, motor drives, and high-voltage fast-switching applications</strong>, where superior efficiency, compact design, and high switching speed are essential.
LMG3410R070RWHR

Description: The LMG3410R070RWHR is a highly advanced 600V gallium nitride (GaN) power stage ...
Package: T&R | MOQ: 2000 | MPQ: 2000

UCC28070APWR / The UCC28070APWR is a high-performance <strong>two-phase interleaved power factor correction (PFC) controller</strong> developed by <strong>Texas Instruments</strong>, designed for high-power AC-DC conversion systems requiring improved efficiency and reduced harmonic distortion. It is optimized for <strong>continuous conduction mode (CCM) boost PFC applications</strong>, commonly used in power supplies above several hundred watts. <br><br>This controller integrates <strong>dual PWM channels operating 180° out of phase</strong>, enabling interleaved operation that significantly reduces input and output ripple currents while simplifying EMI filtering requirements. It uses an <strong>average current-mode control architecture</strong> with inherent current balancing between phases for stable and efficient operation. <br><br>The UCC28070APWR supports a <strong>programmable switching frequency typically from 30kHz up to 300kHz</strong>, allowing designers to optimize system efficiency and component size. It also includes advanced features such as <strong>frequency dithering for EMI reduction, programmable soft-start, duty-cycle clamp, and peak current limiting</strong> for flexible and reliable system design. <br><br>The device incorporates a <strong>highly linear multiplier with voltage feed-forward control</strong>, enabling near-unity power factor and low total harmonic distortion (THD), which is critical for compliance with energy efficiency standards. Its internal architecture also improves transient response and overall system stability. <br><br>Designed for demanding power applications, the controller includes multiple protection mechanisms such as <strong>undervoltage lockout (UVLO), output overvoltage protection, open-loop detection, and input sensing fault detection</strong>, ensuring safe and reliable operation in industrial environments. <br><br>Encapsulated in a compact <strong>20-pin TSSOP surface-mount package</strong>, the UCC28070APWR is suitable for high-density PCB layouts while maintaining strong electrical performance and thermal efficiency. <br><br>The <strong>UCC28070APWR</strong> is widely used in <strong>server power supplies, telecom power systems, industrial AC-DC converters, LED drivers, and high-power SMPS designs</strong>, where high efficiency, low EMI, and reliable power factor correction are essential.
UCC28070APWR

Description: The UCC28070APWR is a high-performance two-phase interleaved power factor correcti ...
Package: T&R | MOQ: 2000 | MPQ: 2000

HV9120NG-G / The HV9120NG-G is a robust and versatile <strong>high-voltage current-mode PWM controller</strong> developed by <strong>Microchip Technology</strong>, specifically designed for offline and high-voltage power conversion applications. It is optimized for use in <strong>flyback, step-up, and step-down DC-DC converter topologies</strong>, enabling efficient energy transfer in power supply systems. <br><br>This controller supports an exceptionally wide <strong>input voltage range from 10V up to 450V</strong>, allowing direct operation from high-voltage sources without requiring complex pre-regulation stages. Its architecture enables reliable startup and stable operation even in demanding power environments. <br><br>The HV9120NG-G utilizes a <strong>current-mode control scheme</strong>, which improves transient response, simplifies loop compensation, and enhances overall system stability. It operates with switching frequencies up to approximately <strong>3MHz</strong>, allowing designers to reduce the size of external components and achieve compact power supply designs. <br><br>The device features a <strong>maximum duty cycle of approximately 49%</strong>, making it particularly suitable for flyback converter applications where controlled energy transfer is essential. It includes key control functions such as <strong>enable control, frequency adjustment, and reset functionality</strong>, providing flexibility in system design. <br><br>Designed for harsh environments, the HV9120NG-G operates across a wide <strong>temperature range of -55°C to +125°C</strong>, ensuring reliability in industrial and high-performance applications. It also integrates protection and control features necessary for stable long-term operation in power conversion circuits. <br><br>Packaged in a standard <strong>16-pin SOIC surface-mount form factor</strong>, the HV9120NG-G is suitable for compact PCB layouts while maintaining strong electrical and thermal performance. <br><br>The <strong>HV9120NG-G</strong> is widely used in <strong>offline power supplies, LED drivers, industrial power systems, high-voltage DC-DC converters, and energy conversion applications</strong>, where efficient and reliable high-voltage PWM control is required.
HV9120NG-G

Description: The HV9120NG-G is a robust and versatile high-voltage current-mode PWM controller ...
Package: | MOQ: 530 | MPQ: 53

MAX4684EUB+ / The MAX4684EUB+ is a compact and high-performance <strong>dual SPDT analog switch</strong> from <strong>Analog Devices / Maxim Integrated</strong>, designed for low-voltage signal routing in portable, industrial, and mixed-signal electronic systems. Its low-resistance switching structure makes it well suited for applications where signal integrity, low power operation, and fast switching response are critical. <br><br>This device operates from a single <strong>+1.8V to +5.5V supply</strong>, providing broad compatibility with modern low-voltage logic and analog circuits. The MAX4684 variant offers very low on-resistance, with approximately <strong>0.5Ω (max) for the NC path</strong> and <strong>0.8Ω (max) for the NO path</strong> at a <strong>+2.7V supply</strong>, helping reduce insertion loss and improve overall signal accuracy. <br><br>The part features <strong>dual single-pole/double-throw (SPDT) switch channels</strong> and supports <strong>break-before-make switching</strong>, which helps prevent momentary shorting between signal paths during channel transitions. It also delivers fast switching characteristics with typical timing around <strong>50ns turn-on</strong> and <strong>40ns turn-off</strong>, making it suitable for high-speed signal selection and routing tasks. <br><br>With <strong>1.8V logic-compatible digital inputs</strong> and very low leakage current, the MAX4684EUB+ can be integrated easily into battery-powered devices, communications equipment, audio switching circuits, and portable consumer electronics. Its low leakage behavior also supports accurate handling of sensitive analog signals. <br><br>Housed in a space-saving <strong>10-pin uMAX / uSOP surface-mount package</strong>, the MAX4684EUB+ is optimized for compact PCB layouts where board space is limited but reliable analog switching performance is still required. <br><br>The <strong>MAX4684EUB+</strong> is commonly used in <strong>audio/video signal routing, battery-operated equipment, communication circuits, portable electronics, power routing, and relay replacement designs</strong>, where low on-resistance and dependable switching behavior are important.
MAX4684EUB+

Description: The MAX4684EUB+ is a compact and high-performance dual SPDT analog switch ...
Package: T&R | MOQ: 1000 | MPQ: 1000

MIC2026-1YM-TR / The MIC2026-1YM-TR is a highly integrated <strong>dual-channel high-side power distribution switch</strong> developed by <strong>Microchip Technology</strong>, designed for controlled power delivery and protection in low-voltage systems. It is commonly used in USB and general-purpose power switching applications where reliability and protection are critical. <br><br>The device features <strong>two independent output channels</strong> with a typical output current capability of up to <strong>1.25A per channel</strong>, enabling efficient power distribution to multiple loads. <br><br>It operates within a supply voltage range of <strong>2.7V to 5.5V</strong>, making it suitable for standard 3.3V and 5V systems, including USB-powered devices and embedded electronics. <br><br>The MIC2026-1YM-TR incorporates advanced protection features such as <strong>current limiting, thermal shutdown, and undervoltage lockout</strong>, ensuring safe operation and protecting both the IC and connected loads from fault conditions. <br><br>It includes a <strong>soft-start mechanism</strong> that reduces inrush current during power-up, improving system stability when driving capacitive loads. Additionally, a <strong>fault status flag output</strong> provides real-time indication of overcurrent or thermal events. <br><br>The device features a <strong>low on-resistance (approximately 90mΩ)</strong>, minimizing power loss and improving overall efficiency in power distribution systems. <br><br>Encased in a compact <strong>8-pin SOIC surface-mount package</strong>, the MIC2026-1YM-TR is optimized for space-constrained PCB designs and easy integration into modern electronic systems. <br><br>The <strong>MIC2026-1YM-TR</strong> is widely used in <strong>USB hubs, embedded systems, notebook PCs, portable devices, and general-purpose power distribution applications</strong>, where controlled power switching and circuit protection are essential.
MIC2026-1YM-TR

Description: The MIC2026-1YM-TR is a highly integrated dual-channel high-side power distributio ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TP4056-42-ESOP8 / The TP4056 is a complete single-cell lithium-ion battery charger IC designed for portable electronic devices. It operates from a 4.0 V to 8.0 V input supply and provides a constant-current/constant-voltage charging profile optimized for lithium-ion batteries. The charging current can be programmed up to approximately 1 A using a single external resistor, allowing flexible charging configurations. The device features an internal power MOSFET and requires only a few external components, making it simple to implement compact battery-charging circuits. The TP4056 includes several integrated protection and management functions such as thermal regulation, automatic recharge, charge termination, battery temperature monitoring (optional), and status output pins for charge indication. It also features undervoltage lockout and soft-start to limit inrush current. Packaged in an SOP-8 surface-mount package, the TP4056 is widely used in power banks, portable electronics, IoT devices, and USB-powered lithium battery charging systems.
TP4056-42-ESOP8

Description: The TP4056 is a complete single-cell lithium-ion battery charger IC designed for portable ...
Package: T&R | MOQ: 4000 | MPQ: 4000

BSP752RXUMA2 / Smart High-Side Power Switch, Overload protection, Current limitation, Short circuit protection, Thermal shutdown with restart, Overvoltage protection (including load dump), Fast demagnetization of inductive loads, Reverse battery protection with external resistor, Open drain diagnostic output for overtemperature and short circuit, Open load detection in OFF-State with external resistor, CMOS compatible input, Loss of GND and loss of Vbb protection, ESD - Protection, Very low standby current, AEC Qualified, Green Product (RoHS compliant)
BSP752RXUMA2

Description: Smart High-Side Power Switch, Overload protection, Current limitation, Short circuit prote ...
Package: T&R | MOQ: 2500 | MPQ: 2500

TPS22975DSGR / The TPS22975DSGR is a compact high-current load switch from Texas Instruments, packaged in an 8‑pin WSON (DSG) package with an exposed thermal pad. It integrates a single N‑channel MOSFET capable of handling up to 6 A continuous current, with a remarkably low on‑resistance of just 16 mΩ over a wide input range (0.6–5.7 V VIN, 2.5–5.7 V VBIAS). The device supports low-voltage logic control (1.2–3.3–5 V), offers configurable slew-rate to manage inrush current, optional quick-output discharge, and includes thermal shutdown and robust ESD protection (2 kV HBM, 1 kV CDM). With ultralow quiescent current (~37 µA) and wide temperature tolerance (–40 °C to +105 °C), it is ideal for efficient power-path management in space-constrained, high-performance systems.
TPS22975DSGR

Description: The TPS22975DSGR is a compact high-current load switch from Texas Instruments, packaged in ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TPS2121RUXR / ​The TPS2121RUXR is a dual-input, single-output (DISO) power multiplexer designed to seamlessly transition between two power sources, ensuring uninterrupted power to the load. It operates over a wide input voltage range of 2.7 V to 22 V, with an absolute maximum input voltage of 24 V. The device features a low typical on-resistance (R_ON) of 56 mΩ, facilitating efficient power delivery. It supports an adjustable output current limit ranging from 1 A to 4.5 A, configurable via an external resistor. The TPS2121RUXR offers a fast switchover time of approximately 5 µs, minimizing voltage drop during source transitions. Additional features include adjustable overvoltage protection, priority input selection, channel status indication, and adjustable soft-start times. The device is housed in a 12-pin VQFN-HR package and operates within a temperature range of -40°C to 125°C, making it suitable for various applications requiring reliable power management. ​
TPS2121RUXR

Description: ​The TPS2121RUXR is a dual-input, single-output (DISO) power multiplexer designed to sea ...
Package: T&R | MOQ: 3000 | MPQ: 3000

TPL5110QDDCRQ1 / ​The TPL5110QDDCRQ1 is an automotive-grade, nano-power system timer with an integrated MOSFET driver, designed for power-gating applications. It operates within a supply voltage range of 1.8V to 5.5V and consumes a typical current of 35 nA at 2.5V, making it highly energy-efficient. The device offers selectable timing intervals from 100 milliseconds to 7200 seconds, with a typical timer accuracy of 1%. It features a resistor-selectable time interval, manual MOSFET power-on capability, and a unique one-shot function where the timer powers the MOSFET for a single cycle. Qualified for automotive applications, the TPL5110QDDCRQ1 meets AEC-Q100 standards, operating over a temperature range of -40°C to 125°C. It is available in a compact 6-pin SOT-23 package. ​
TPL5110QDDCRQ1

Description: ​The TPL5110QDDCRQ1 is an automotive-grade, nano-power system timer with an integrated M ...
Package: T&R | MOQ: 3000 | MPQ: 3000

DRV5032FBDBZR / ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas Instruments, designed for compact and battery-sensitive applications. Operating within a supply voltage range of 1.65 V to 5.5 V, it features a typical power consumption of 0.54 µA at a 5-Hz sampling rate. This omnipolar sensor responds to both north and south magnetic fields, with an operate point (BOP) of ±4.8 mT and a release point (BRP) of ±3 mT, resulting in a hysteresis (BHYS) of 1.5 mT. The device provides a push-pull output configuration and is housed in a 3-pin SOT-23 package. With an operating temperature range from –40°C to +85°C, the DRV5032FBDBZR is suitable for various applications, including battery-critical position sensing, portable electronics, and contactless activation systems. ​
DRV5032FBDBZR

Description: ​The DRV5032FBDBZR is an ultra-low-power digital-switch Hall effect sensor from Texas In ...
Package: T&R | MOQ: 3000 | MPQ: 3000

MMPF0100F0AEP / The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors, designed to efficiently regulate power in embedded systems, particularly for i.MX 6 processors and similar applications. It features multiple high-efficiency buck regulators, a boost regulator, and six linear regulators (LDOs), making it ideal for complex power architectures. The device supports dynamic voltage scaling (DVS), allowing power optimization based on system demand, and includes programmable power-up sequencing, standby modes, and OTP memory configuration. With a switching frequency of up to 4 MHz, it ensures minimal noise and efficient operation. Built-in protection features such as thermal shutdown, current limiting, and short-circuit protection enhance system reliability. Operating within a 2.8 V to 4.5 V input range, the PMIC is well-suited for industrial control, medical devices, smart home applications, and portable electronics. Its compact 56-pin HVQFN package (8 mm × 8 mm) ensures a small footprint while providing extensive power management capabilities.
MMPF0100F0AEP

Description: The MMPF0100F0AEP is a high-performance Power Management IC (PMIC) from NXP Semiconductors ...
Package: TRAY | MOQ: 520 | MPQ: 260

ADM6713SAKSZ-REEL7 / The ADM6713SAKSZ-REEL7 is a voltage supervisor IC designed for monitoring power supply voltages and providing reset signals to ensure reliable operation of microprocessor-based systems. It features a manual reset input for external reset initiation, and it asserts reset when VCC drops below 2.89 V, deasserting it when VCC exceeds 2.96 V. With a typical supply current of just 35 µA, it is highly power-efficient. The device operates over an extended temperature range of -40°C to +125°C, making it suitable for automotive and industrial applications. Housed in a 4-lead SC70 package, it is ideal for compact designs. The -REEL7 suffix indicates the part is provided on a 7-inch reel for automated assembly.
ADM6713SAKSZ-REEL7

Description: The ADM6713SAKSZ-REEL7 is a voltage supervisor IC designed for monitoring power supply vol ...
Package: T&R | MOQ: 3000 | MPQ: 3000

ADM1293-1AACPZ / The ADM1293-1AACPZ is a high-precision, high-side digital current, voltage, and power monitor from Analog Devices. It is designed for monitoring power consumption in systems that require accurate current sensing and power management. The device features a 16-bit ADC for current, voltage, and power measurements, ensuring high-precision monitoring. It can measure voltage, current, and power in a wide range of systems and is ideal for applications such as power supply monitoring, data centers, servers, and telecommunications equipment. With a common-mode voltage range from 0 V to 20 V, it supports high-side current sensing, and it is capable of bidirectional current sensing.
ADM1293-1AACPZ

Description: The ADM1293-1AACPZ is a high-precision, high-side digital current, voltage, and power moni ...
Package: TRAY | MOQ: 528 | MPQ: 66

ADG721BRMZ-REEL7 / The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog Devices, designed for low-voltage, high-speed switching applications. It features a low on-resistance of 4Ω (max) and excellent channel-to-channel matching of 300mΩ (max). The switch operates with a supply voltage range of 1.8V to 5.5V and offers fast switching times with a turn-on time of 14ns (max) and a turn-off time of 6ns (max). With a -3dB bandwidth of 200MHz and low charge injection (2pC), it ensures minimal distortion and high-speed signal routing. The ADG721BRMZ-REEL7 is ideal for use in communication systems, audio/video switching, test equipment, and portable devices, with a temperature range of -40°C to +85°C.
ADG721BRMZ-REEL7

Description: The ADG721BRMZ-REEL7 is a dual SPST (Single-Pole Single-Throw) analog switch from Analog D ...
Package: T&R | MOQ: 1000 | MPQ: 1000

TPS3803-01DCKR / Supervisor Open Drain or Open Collector 1 Channel SC-70-5
TPS3803-01DCKR

Description: Supervisor Open Drain or Open Collector 1 Channel SC-70-5 ...
Package: T&R | MOQ: 3000 | MPQ: 3000

STMPS2141STR / Power Switch/Driver 1:1 N-Channel 500mA SOT-23-5, The STMPS2141STR is a high-side power distribution switch from STMicroelectronics, designed for applications requiring robust power management.
STMPS2141STR

Description: Power Switch/Driver 1:1 N-Channel 500mA SOT-23-5, The STMPS2141STR is a high-side power di ...
Package: T&R | MOQ: 3000 | MPQ: 3000

NCV8460ADR2G / Power Switch/Driver 1:1 N-Channel 6A 8-SOIC
NCV8460ADR2G

Description: Power Switch/Driver 1:1 N-Channel 6A 8-SOIC ...
Package: T&R | MOQ: 2500 | MPQ: 2500

ITS4140NHUMA1 / Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, 1Ohm RDSon
ITS4140NHUMA1

Description: Power Switch/Driver 1:1 N-Channel 200mA PG-SOT223-4, 4.9V ~ 60V, On/Off, N-Channel, 200mA, ...
Package: T&R | MOQ: 4000 | MPQ: 4000













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |