All Products RF & Wifi Module

EC25EFA-MINIPCIE / The <strong>EC25EFA-MINIPCIE</strong> is a high-performance <strong>LTE Category 4 Mini PCIe cellular communication module</strong> from <strong>Quectel</strong>, designed for industrial Internet of Things (IoT), machine-to-machine (M2M), transportation, remote monitoring, industrial routers, embedded gateways, and networking equipment. Utilizing the industry-standard <strong>Mini PCI Express</strong> form factor, it enables rapid integration into embedded computing platforms while providing reliable broadband cellular connectivity. The module supports LTE Cat 4 download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. The <strong>EC25-AF</strong> regional variant is optimized for deployment in <strong>North America</strong> and supports multiple LTE, UMTS/HSPA+, and GSM/GPRS/EDGE frequency bands, ensuring seamless fallback to legacy cellular networks when LTE coverage is unavailable. This broad network compatibility makes the module suitable for industrial equipment deployed across regional carrier networks. An integrated <strong>multi-constellation GNSS receiver</strong> is available, supporting <strong>GPS, GLONASS, BeiDou (BDS), Galileo, and QZSS</strong>. The integrated positioning engine simplifies hardware development by eliminating the need for a separate GNSS receiver while providing accurate navigation, tracking, and timing capabilities for fleet management, telematics, and asset tracking applications. The EC25EFA-MINIPCIE provides extensive hardware interfaces including <strong>USB 2.0 High-Speed, UART, I²C, PCM digital audio, USIM interface, hardware reset, RF disable control, network status indication, and dedicated LTE diversity and GNSS antenna connectors</strong>. It also supports a comprehensive protocol stack including <strong>TCP/IP, UDP, PPP, FTP, FTPS, HTTP, HTTPS, MQTT, SSL/TLS, SMTP, NTP, QMI, CMUX, DFOTA, and Quectel enhanced AT commands</strong>, enabling rapid integration into industrial communication systems. Operating from a <strong>3.0V to 3.6V supply voltage (3.3V typical)</strong>, the module delivers excellent RF performance while maintaining low power consumption. The standard <strong>51.0 × 30.0 × 4.9 mm Mini PCIe form factor</strong> allows direct installation into Mini PCIe sockets, while the industrial operating temperature range of <strong>-40°C to +80°C</strong> ensures reliable operation in demanding environments. The module is fully supported under <strong>Windows, Linux, and Android</strong>, with USB networking modes including QMI, ECM, RNDIS, PPP, and USB serial interfaces depending on the operating system and firmware configuration. Its mature software ecosystem significantly reduces development time for industrial networking products and embedded IoT platforms. The <strong>EC25EFA-MINIPCIE</strong> is widely used in <strong>industrial LTE routers, IoT gateways, industrial PCs, fleet management systems, vehicle telematics, remote monitoring equipment, smart utility meters, digital signage, payment terminals, security systems, transportation equipment, agricultural automation, edge computing platforms, vending machines, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity in a standard Mini PCIe form factor.
EC25EFA-MINIPCIE

Description: The EC25EFA-MINIPCIE is a high-performance LTE Category 4 Mini PC ...
Package: TRAY | MOQ: 100 | MPQ: 100

EC25EUGA-MINIPCIE / The <strong>EC25EUGA-MINIPCIE</strong> is a high-performance <strong>LTE Category 4 Mini PCIe cellular communication module</strong> from <strong>Quectel</strong>, developed for industrial Internet of Things (IoT), machine-to-machine (M2M), transportation, networking equipment, remote monitoring, and embedded communication systems. Built in the industry-standard <strong>Mini PCI Express</strong> form factor, it enables rapid integration into industrial routers, gateways, embedded computers, and networking platforms while delivering reliable broadband cellular connectivity. It supports LTE Cat 4 download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. The <strong>EC25-EU</strong> regional variant is optimized for <strong>Europe and selected EMEA markets</strong>. It supports LTE-FDD Bands <strong>B1/B3/B7/B8/B20/B28A</strong>, LTE-TDD Bands <strong>B38/B40/B41</strong>, WCDMA Bands <strong>B1/B8</strong>, and GSM/EDGE Bands <strong>B3/B8</strong>. Full backward compatibility with 3G and 2G networks ensures uninterrupted communication where LTE service is unavailable. An optional integrated <strong>multi-constellation GNSS receiver</strong> supports <strong>GPS, GLONASS, BeiDou, Galileo, and QZSS</strong>, providing accurate positioning and navigation for fleet management, asset tracking, telematics, and location-aware IoT devices without requiring a separate GNSS receiver. The module offers comprehensive hardware interfaces including <strong>USB 2.0 High-Speed, UART, I²C, PCM digital audio, USIM interface, hardware reset, RF disable control, status indication, and dedicated LTE MIMO and GNSS antenna connections</strong>. It supports a complete protocol stack including <strong>TCP/IP, UDP, PPP, FTP, HTTP, HTTPS, MQTT, SSL/TLS, SMTP, NTP, DFOTA, and Quectel AT commands</strong>, enabling fast integration into industrial embedded systems and cloud-connected applications. Operating from a <strong>3.0V to 3.6V supply voltage (3.3V typical)</strong>, the EC25EUGA-MINIPCIE delivers excellent RF performance while maintaining low power consumption. The standard <strong>51.0 × 30.0 × 4.9 mm Mini PCIe form factor</strong> allows direct installation into Mini PCIe sockets, and the industrial operating temperature range of <strong>-35°C to +75°C</strong> (extended <strong>-40°C to +80°C</strong>) makes it suitable for demanding environments. The module is fully supported under <strong>Windows, Linux, Android, and OpenWrt</strong>, with USB networking modes such as ECM, RNDIS, MBIM, QMI, and PPP depending on firmware configuration. Its mature software ecosystem and industrial certifications simplify deployment in commercial and industrial networking equipment. The <strong>EC25EUGA-MINIPCIE</strong> is widely used in <strong>industrial LTE routers, IoT gateways, industrial PCs, vehicle telematics, fleet management systems, remote monitoring equipment, smart utility meters, payment terminals, digital signage, security systems, agricultural automation, transportation equipment, edge computing platforms, vending machines, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity in a standard Mini PCIe form factor.
EC25EUGA-MINIPCIE

Description: The EC25EUGA-MINIPCIE is a high-performance LTE Category 4 Mini P ...
Package: TRAY | MOQ: 1000 | MPQ: 100

MC20CE-04-SNN / The <strong>MC20CE-04-SNN</strong> is a compact <strong>Quad-Band GSM/GPRS cellular communication module with integrated multi-constellation GNSS</strong> from <strong>Quectel</strong>. Designed for industrial Internet of Things (IoT), machine-to-machine (M2M), wearable devices, asset tracking, vehicle telematics, and security applications, it combines reliable 2G wireless communication with high-performance satellite positioning in a highly integrated surface-mount package. The module supports GSM/GPRS data rates of up to <strong>85.6 kbps</strong> for both uplink and downlink communications. The module operates on <strong>Quad-Band GSM/GPRS networks (850/900/1800/1900 MHz)</strong>, enabling worldwide deployment wherever 2G infrastructure remains available. It integrates comprehensive TCP/IP networking capabilities, including <strong>TCP, UDP, PPP, FTP, HTTP, and SMTP</strong>, allowing developers to build connected IoT products without requiring an external communication processor. Integrated <strong>multi-constellation GNSS</strong> supports <strong>GPS, GLONASS, BeiDou, and QZSS</strong>, providing fast positioning, improved tracking sensitivity, and excellent navigation accuracy. The module incorporates an internal <strong>LNA (Low Noise Amplifier)</strong>, high-sensitivity GNSS receiver, and advanced positioning technologies such as <strong>EPO™</strong>, enabling faster time-to-first-fix and reliable operation even in challenging environments. The MC20CE-04-SNN provides a comprehensive collection of interfaces including <strong>UART, USB, I²C, PCM audio, ADC, GPIO, SIM card interface, antenna connections, NETLIGHT, RESET, and PWRKEY</strong>. It supports standard AT commands, voice calls, SMS messaging, embedded TCP/IP networking, and optional <strong>Bluetooth 3.0/4.0</strong> functionality on supported variants, simplifying integration into embedded systems and industrial controllers. Operating from a <strong>3.3V to 4.6V supply voltage (4.0V nominal)</strong>, the module is optimized for low-power operation while maintaining excellent RF performance. The compact <strong>18.7 × 16.0 × 2.1 mm LCC package</strong> reduces PCB area by approximately 40% compared with traditional GSM + GNSS solutions, making it ideal for space-constrained products. The industrial operating temperature range of <strong>-40°C to +85°C</strong> ensures reliable performance in demanding environments. The module supports firmware upgrades, remote management, and long-term industrial deployment while remaining compatible with standard embedded operating systems and microcontroller platforms. Its mature GSM/GPRS architecture provides a proven solution for applications where LTE connectivity is unnecessary or unavailable. The <strong>MC20CE-04-SNN</strong> is widely used in <strong>vehicle tracking systems, personal GPS trackers, wearable devices, pet trackers, fleet management, security equipment, industrial telemetry, smart metering, environmental monitoring, emergency alert systems, logistics tracking, portable terminals, remote monitoring equipment, agricultural automation, and machine-to-machine (M2M) communication applications</strong> requiring reliable GSM/GPRS connectivity together with integrated GNSS positioning.
MC20CE-04-SNN

Description: The MC20CE-04-SNN is a compact Quad-Band GSM/GPRS cellular commun ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC200NCNLA-N05-SNNSA / The <strong>EC200NCNLA-N05-SNNSA</strong> is a compact and cost-effective <strong>LTE Category 1 cellular communication module</strong> from <strong>Quectel</strong>, specifically designed for industrial Internet of Things (IoT), machine-to-machine (M2M), smart metering, remote monitoring, payment terminals, security systems, and embedded communication equipment. As a member of the EC200N Series, it provides reliable LTE connectivity while maintaining low power consumption and a highly integrated hardware architecture suitable for mass-market IoT deployments. It supports LTE Cat 1 download speeds of up to <strong>10 Mbps</strong> and upload speeds of up to <strong>5 Mbps</strong>. The module supports <strong>LTE-FDD</strong> and <strong>LTE-TDD</strong> cellular networks and is optimized for the <strong>China and India</strong> regional markets. It provides reliable broadband wireless communication while maintaining compatibility with modern LTE infrastructure for industrial and commercial IoT applications. The EC200NCNLA-N05-SNNSA integrates a rich collection of communication interfaces including <strong>USB 2.0 High-Speed, UART, I²C, PCM digital audio, GPIO, ADC, SIM interface, RESET, PWRKEY, and RF antenna interface</strong>. Selected variants also support <strong>Bluetooth® 5.0</strong> and optional <strong>GNSS (GPS/BeiDou)</strong>, allowing developers to implement wireless connectivity and positioning functions within a single hardware platform. Operating from a <strong>3.4V to 4.5V supply voltage (3.8V typical)</strong>, the module delivers excellent RF performance while maintaining low power consumption. The compact <strong>29 × 32 × 2.4 mm LCC package</strong> supports fully automated SMT assembly, making it suitable for high-volume manufacturing. It is specified for an operating temperature range of <strong>-35°C to +75°C</strong>, with extended industrial versions supporting operation up to <strong>-40°C to +85°C</strong>. The module supports a comprehensive software ecosystem including <strong>TCP/IP, UDP, PPP, HTTP, HTTPS, FTP, MQTT, SSL/TLS, SMTP, CMUX, NTP, SMS, DFOTA (Device Firmware Over-The-Air), and standard AT commands</strong>. Drivers are available for <strong>Windows, Linux, and Android</strong>, enabling rapid integration into industrial gateways, ARM platforms, embedded Linux systems, and custom microcontroller-based products. The <strong>EC200NCNLA-N05-SNNSA</strong> is widely used in <strong>industrial IoT gateways, smart utility meters, payment terminals, POS systems, industrial automation equipment, remote telemetry units, vehicle tracking devices, security and alarm systems, environmental monitoring stations, agricultural automation, vending machines, logistics terminals, digital signage, healthcare equipment, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 1 connectivity, compact size, and long-term industrial reliability.
EC200NCNLA-N05-SNNSA

Description: The EC200NCNLA-N05-SNNSA is a compact and cost-effective LTE Cate ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC200TEUHA-N06-MN0AA / The <strong>EC200TEUHA-N06-MN0AA</strong> is a high-performance <strong>LTE Category 4 cellular communication module</strong> from <strong>Quectel</strong>, designed for industrial Internet of Things (IoT), machine-to-machine (M2M), remote monitoring, smart metering, transportation, payment terminals, and embedded communication systems. As a member of the <strong>EC200T Series</strong>, it combines broadband LTE connectivity with an optimized hardware architecture, delivering reliable wireless communication for long-life industrial products. It supports LTE Cat 4 data rates of up to <strong>150 Mbps downlink</strong> and <strong>50 Mbps uplink</strong>. The <strong>EUHA</strong> regional variant is optimized for <strong>Europe</strong> and supports LTE-FDD, LTE-TDD, WCDMA, and GSM/EDGE networks, providing seamless fallback to legacy cellular technologies when LTE coverage is unavailable. This ensures dependable communication across industrial, commercial, and transportation applications throughout Europe and compatible regions. The module integrates comprehensive communication interfaces including <strong>USB 2.0 High-Speed, dual UART, I²C, SDIO, ADC, PCM digital audio, GPIO, SIM card interface, RESET, PWRKEY, NETLIGHT, and dedicated LTE main and diversity antenna connections</strong>. It supports a rich software ecosystem featuring <strong>TCP/IP, UDP, PPP, FTP, HTTP, HTTPS, MQTT, SSL/TLS, SMTP, CMUX, NTP, DFOTA (Firmware Over-The-Air), and Quectel enhanced AT commands</strong>, enabling rapid integration into cloud-connected embedded products. Operating from a <strong>3.4V to 4.5V supply voltage</strong>, the EC200TEUHA-N06-MN0AA is designed for low-power industrial operation while maintaining excellent RF performance. The compact <strong>29 × 32 × 2.4 mm LCC package</strong> supports automated SMT assembly and provides an industrial operating temperature range of <strong>-35°C to +75°C</strong>, with extended operation up to <strong>-40°C to +80°C</strong> under specified conditions. The module supports <strong>Windows, Linux, and Android</strong> through USB serial, ECM, RNDIS, and related drivers, simplifying integration with industrial computers, ARM platforms, embedded Linux gateways, and custom microcontroller-based hardware. Firmware updates can be performed through USB or remotely using DFOTA, reducing maintenance costs in field deployments. The <strong>EC200TEUHA-N06-MN0AA</strong> is widely used in <strong>industrial IoT gateways, LTE routers, smart utility meters, payment terminals, industrial automation systems, transportation equipment, security and alarm systems, remote monitoring devices, digital signage, agricultural automation, vending machines, telemetry equipment, environmental monitoring systems, edge computing platforms, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity and long-term industrial reliability.
EC200TEUHA-N06-MN0AA

Description: The EC200TEUHA-N06-MN0AA is a high-performance LTE Category 4 cel ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC200AEUHA-N06-SNASA / The <strong>EC200AEUHA-N06-SNASA</strong> is a high-performance <strong>LTE Category 4 cellular communication module</strong> from <strong>Quectel</strong>, specifically developed for industrial Internet of Things (IoT), machine-to-machine (M2M), smart metering, transportation, security, remote monitoring, and embedded networking applications. As a member of the EC200A Series, it delivers reliable broadband cellular connectivity in a compact surface-mount package optimized for industrial deployments. It supports LTE Cat 4 download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. The <strong>EUHA</strong> variant is optimized for <strong>EMEA and Southeast Asia</strong> and supports LTE-FDD Bands <strong>B1/B3/B5/B7/B8/B20/B28</strong>, LTE-TDD Bands <strong>B38/B40/B41</strong>, WCDMA Bands <strong>B1/B5/B8</strong>, and GSM/EDGE Bands <strong>B3/B8</strong>. Backward compatibility with 3G and 2G networks ensures dependable communication in areas where LTE coverage is limited. The module provides a comprehensive set of interfaces including <strong>USB 2.0 High-Speed, UART, SPI, I²C, SDIO, ADC, PCM digital audio, GPIO, SIM interface, NETLIGHT, RESET, and PWRKEY</strong>. These interfaces allow seamless integration with ARM processors, embedded Linux systems, industrial controllers, and custom microcontroller-based hardware. It also supports standard AT commands and protocol stacks including <strong>TCP/IP, UDP, HTTP, HTTPS, FTP, MQTT, PPP, SSL/TLS, CMUX, DFOTA, audio playback, and voice services</strong>, significantly reducing software development time. Operating from a <strong>3.4V to 4.5V supply voltage</strong>, the EC200AEUHA-N06-SNASA is designed for low-power industrial operation with sleep current in the microamp range. The compact <strong>29 × 32 × 2.4 mm LCC package</strong> supports automated SMT assembly, while the industrial operating temperature range of <strong>-35°C to +75°C</strong> (extended versions up to <strong>-40°C to +85°C</strong>) ensures reliable performance in demanding environments. The module supports <strong>Windows, Linux, Android, OpenWrt, and embedded operating systems</strong> through USB networking interfaces and serial AT commands. Multiple USB networking modes, firmware-over-the-air updates, and industrial-grade software support make it suitable for long-life connected products deployed in commercial and industrial environments. The <strong>EC200AEUHA-N06-SNASA</strong> is widely used in <strong>industrial IoT gateways, LTE routers, smart utility meters, remote monitoring systems, payment terminals, digital signage, industrial automation, transportation systems, security equipment, vending machines, agricultural automation, telemetry units, edge computing platforms, environmental monitoring devices, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity and long-term industrial reliability.
EC200AEUHA-N06-SNASA

Description: The EC200AEUHA-N06-SNASA is a high-performance LTE Category 4 cel ...
Package: TRAY | MOQ: 250 | MPQ: 250

EG25GGC-MINIPCIE / The <strong>EG25GGC-MINIPCIE</strong> is a high-performance <strong>LTE Category 4 Mini PCIe cellular communication module</strong> from <strong>Quectel</strong>, specifically designed for industrial Internet of Things (IoT), machine-to-machine (M2M), transportation, networking, remote monitoring, and embedded communication systems. Built in the industry-standard <strong>Mini PCI Express</strong> form factor, it allows rapid integration into industrial routers, gateways, embedded computers, and networking equipment while providing reliable worldwide cellular connectivity. It supports LTE Cat 4 data rates of up to <strong>150 Mbps downlink</strong> and <strong>50 Mbps uplink</strong>. The module is fully backward compatible with <strong>UMTS/HSPA+</strong> and <strong>GSM/GPRS/EDGE</strong> networks, ensuring continuous communication even in areas where LTE coverage is unavailable. The <strong>EG25-GGC</strong> regional variant is optimized for deployment across global LTE networks, making it suitable for internationally deployed industrial products. Integrated <strong>multi-constellation GNSS</strong> supports <strong>GPS, GLONASS, BeiDou (BDS), Galileo, and QZSS</strong>, enabling accurate positioning, navigation, and timing without requiring an external GNSS receiver. This integration reduces PCB complexity, minimizes BOM cost, and simplifies the development of tracking, telematics, fleet management, and navigation-enabled products. The EG25GGC-MINIPCIE provides a comprehensive set of interfaces including <strong>USB 2.0 High-Speed, UART, I²C, PCM digital audio, USIM interface, network status indication, RF disable control, hardware reset, and dedicated LTE diversity and GNSS antenna connectors</strong>. It also supports a rich protocol stack including <strong>TCP/IP, UDP, PPP, FTP, HTTP, HTTPS, MQTT, SMTP, SSL/TLS, NTP, DFOTA, and Quectel enhanced AT commands</strong>, allowing rapid integration into cloud-connected embedded systems. Operating from a <strong>3.0V to 3.6V supply voltage (3.3V typical)</strong>, the module is optimized for low power consumption while maintaining excellent RF performance. The standard <strong>51.0 × 30.0 × 4.9 mm Mini PCIe form factor</strong> supports direct installation into compatible Mini PCIe sockets, while the extended operating temperature range of up to <strong>-40°C to +80°C</strong> makes it suitable for demanding industrial environments. The module is supported by <strong>Windows, Linux, and Android</strong> USB drivers and is compatible with industrial computers, ARM-based embedded systems, networking equipment, and custom hardware platforms. Support for LTE MIMO technology improves data throughput and communication reliability, making the module suitable for broadband IoT applications. The <strong>EG25GGC-MINIPCIE</strong> is widely used in <strong>industrial LTE routers, IoT gateways, vehicle telematics, fleet management systems, remote monitoring equipment, digital signage, industrial PCs, rugged tablets, payment terminals, smart transportation, agricultural automation, security systems, vending machines, edge computing platforms, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity together with optional integrated GNSS positioning.
EG25GGC-MINIPCIE

Description: The EG25GGC-MINIPCIE is a high-performance LTE Category 4 Mini PC ...
Package: TRAY | MOQ: 100 | MPQ: 100

RM520NGLAA-M20-SGASA / The <strong>RM520NGLAA-M20-SGASA</strong> is a high-performance <strong>5G NR Sub-6 GHz cellular communication module</strong> from <strong>Quectel</strong>, developed for next-generation industrial IoT, edge computing, enterprise networking, fixed wireless access (FWA), transportation, robotics, and high-speed machine-to-machine (M2M) applications. Built on the industry-standard <strong>M.2 3052 (Key B)</strong> form factor, it enables easy integration into routers, industrial PCs, embedded computers, and networking equipment while providing ultra-fast 5G connectivity. The module supports both <strong>5G Standalone (SA)</strong> and <strong>Non-Standalone (NSA)</strong> network architectures, delivering peak download speeds of up to <strong>2.4 Gbps</strong> and upload speeds of up to <strong>900 Mbps</strong>. It also provides backward compatibility with <strong>LTE, WCDMA, and other legacy cellular networks</strong>, ensuring uninterrupted communication where 5G coverage is unavailable. Integrated <strong>multi-constellation GNSS</strong> supports <strong>GPS, GLONASS, Galileo, BeiDou, and QZSS</strong>, enabling accurate positioning, navigation, and timing for fleet management, autonomous systems, asset tracking, and industrial automation without requiring an external positioning receiver. The RM520NGLAA-M20-SGASA provides a comprehensive range of hardware interfaces including <strong>USB 3.1, PCIe, UART, SPI, I²C, PCM/I²S audio, ADC, GPIO, SD card interface, and multiple RF antenna connections</strong>. These interfaces allow seamless integration with ARM processors, x86 industrial computers, embedded Linux platforms, networking appliances, and custom hardware designs. Operating from a <strong>3.135V to 4.4V supply voltage</strong>, the module is optimized for high-speed data communication while maintaining excellent RF performance and industrial reliability. The compact <strong>52 × 30 × 2.3 mm M.2 package</strong> simplifies system design and enables rapid deployment in high-performance embedded platforms. The module supports a broad software ecosystem including <strong>Linux, Windows, Android, USB networking modes, AT commands, TCP/IP protocol stack, MQTT, HTTP, HTTPS, FTP, SSL/TLS, and firmware-over-the-air (FOTA) updates</strong>. These capabilities reduce development time and simplify cloud integration for industrial and commercial applications. The <strong>RM520NGLAA-M20-SGASA</strong> is widely used in <strong>5G industrial gateways, enterprise routers, fixed wireless access (FWA) equipment, edge AI computers, industrial IoT controllers, autonomous robots, smart transportation systems, video surveillance, telemedicine devices, smart factories, agricultural automation, remote monitoring equipment, digital signage, private 5G networks, and high-speed embedded communication systems</strong> requiring reliable multi-gigabit wireless connectivity together with integrated GNSS positioning.
RM520NGLAA-M20-SGASA

Description: The RM520NGLAA-M20-SGASA is a high-performance 5G NR Sub-6 GHz ce ...
Package: TRAY | MOQ: 100 | MPQ: 100

EG95EFB-512-SNND / The <strong>EG95EFB-512-SNND</strong> is a high-performance <strong>LTE Category 4 cellular communication module</strong> from <strong>Quectel</strong>, engineered for industrial Internet of Things (IoT), machine-to-machine (M2M), transportation, security, remote monitoring, and embedded communication systems. Combining high-speed LTE connectivity with integrated multi-constellation GNSS positioning, the module delivers reliable wireless communication and accurate location services in a compact surface-mount package. It supports LTE Cat 4 download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. The module provides backward compatibility with <strong>UMTS/WCDMA, HSPA+, EDGE, and GSM/GPRS</strong> networks, ensuring dependable operation in areas where LTE coverage is limited. The <strong>EG95-EF</strong> regional variant is optimized for deployment across Europe, the Middle East, Africa, and other supported markets, making it suitable for globally distributed industrial products. Integrated <strong>multi-constellation GNSS</strong> supports <strong>GPS, GLONASS, Galileo, BeiDou, and QZSS</strong>, enabling precise positioning, navigation, and timing without requiring an external GNSS receiver. This reduces PCB area, lowers BOM cost, and simplifies the development of tracking, fleet management, and navigation-enabled IoT devices. The EG95EFB-512-SNND features comprehensive hardware interfaces including <strong>USB 2.0 High-Speed, UART, SPI, I²C, PCM digital audio, GPIO, and USIM</strong>, providing seamless integration with ARM processors, embedded Linux platforms, industrial controllers, and custom microcontroller-based systems. It supports standard AT commands together with TCP/IP, UDP, HTTP, HTTPS, FTP, MQTT, SSL/TLS, PPP, SMS, voice, and firmware update capabilities, enabling rapid development of cloud-connected products. Operating from a <strong>3.3V to 4.3V supply voltage (3.8V typical)</strong>, the module is optimized for industrial reliability while maintaining low power consumption. The compact <strong>29 × 25 × 2.3 mm LGA package</strong> supports automated SMT assembly and is specified for an operating temperature range of <strong>-35°C to +75°C</strong>, making it suitable for demanding industrial environments. The module is supported by <strong>Windows, Linux, and Android</strong> operating systems and offers multiple USB networking modes for straightforward integration into industrial computers, LTE gateways, routers, edge computing devices, and embedded systems. Its mature software ecosystem and extensive protocol support simplify deployment in professional communication equipment. The <strong>EG95EFB-512-SNND</strong> is widely used in <strong>industrial IoT gateways, vehicle telematics, GPS tracking systems, fleet management, smart utility meters, payment terminals, industrial automation, transportation systems, security equipment, remote monitoring devices, digital signage, agricultural automation, medical communication equipment, smart city infrastructure, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity with integrated GNSS positioning.
EG95EFB-512-SNND

Description: The EG95EFB-512-SNND is a high-performance LTE Category 4 cellula ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC800MCNGD-I03-SGNSA / The <strong>EC800MCNGD-I03-SGNSA</strong> is an ultra-compact <strong>LTE Category 1 wireless communication module</strong> from <strong>Quectel</strong>, specifically engineered for cost-sensitive IoT and machine-to-machine (M2M) applications. It combines reliable LTE connectivity, integrated multi-constellation GNSS positioning, rich communication interfaces, and a highly compact footprint, making it ideal for embedded systems where PCB space is limited. It supports LTE Cat 1 data rates of up to <strong>10 Mbps downlink</strong> and <strong>5 Mbps uplink</strong>. The module is designed using a compact <strong>LCC + LGA package measuring only 17.7 × 15.8 × 2.4 mm</strong>, allowing straightforward SMT assembly while maintaining compatibility with other Quectel EC800 family modules. Its small size and unified footprint simplify hardware migration between product variants and reduce overall PCB redesign effort. The <strong>SGNSA</strong> variant integrates <strong>multi-constellation GNSS</strong> supporting <strong>GPS, BeiDou (BDS), GLONASS, and Galileo</strong>, providing accurate positioning, navigation, and timing for location-aware IoT products without requiring an external GNSS receiver. This integration minimizes BOM cost while improving system reliability and reducing PCB area. The EC800MCNGD-I03-SGNSA supports numerous industrial interfaces including <strong>USB 2.0 High-Speed, UART, I²C, ADC, GPIO, dual USIM support (optional), PCM digital audio (optional), NET_STATUS, RESET, PWRKEY, and dedicated RF interfaces</strong>. Support for USB virtual COM drivers on <strong>Windows, Linux, and Android</strong> enables rapid software integration into embedded platforms. Operating from a <strong>3.4V to 4.3V supply voltage (3.8V typical)</strong>, the module incorporates extensive Internet protocol stacks and advanced software features including <strong>TCP/IP, MQTT, HTTP, HTTPS, FTP, SSL/TLS, DFOTA (Device Firmware Over-The-Air), Wi-Fi Scan positioning, and optional QuecOpen® support</strong>. These capabilities significantly simplify cloud connectivity and remote device management for industrial deployments. Designed for industrial IoT applications, the module provides low power consumption, excellent RF performance, and long-term operational reliability. Laser marking technology improves traceability while enhancing resistance to wear during automated manufacturing processes. Compatibility with the EC800E-CN, EC800G-CN, EC800N-CN, EC800K-CN, and EG800K module families further simplifies product upgrades and lifecycle management. The <strong>EC800MCNGD-I03-SGNSA</strong> is widely used in <strong>asset tracking devices, industrial IoT gateways, POS terminals, smart security systems, vehicle telematics, remote monitoring equipment, industrial handheld terminals, smart metering, payment terminals, fleet management systems, environmental monitoring devices, agricultural automation, intelligent transportation, logistics tracking, and embedded M2M communication applications</strong> requiring compact size, reliable LTE Cat 1 connectivity, and integrated GNSS positioning.
EC800MCNGD-I03-SGNSA

Description: The EC800MCNGD-I03-SGNSA is an ultra-compact LTE Category 1 wirel ...
Package: TRAY | MOQ: 250 | MPQ: 250

EG91EFB-512-SNND / The <strong>EG91EFB-512-SNND</strong> is a compact <strong>LTE Category 1 cellular communication module</strong> from <strong>Quectel</strong>, engineered for industrial Internet of Things (IoT), machine-to-machine (M2M), telemetry, smart metering, asset tracking, security systems, and embedded communication applications. The module combines reliable LTE connectivity with integrated multi-constellation GNSS positioning, making it an excellent solution for devices requiring both wireless communication and location awareness. Supporting <strong>LTE Cat 1</strong> technology, the module delivers download speeds of up to <strong>10 Mbps</strong> and upload speeds of up to <strong>5 Mbps</strong>. It also maintains backward compatibility with <strong>UMTS/WCDMA</strong> and <strong>GSM/GPRS/EDGE</strong> networks, ensuring dependable operation in regions where LTE coverage is unavailable. LTE Cat 1 provides an ideal balance between bandwidth, power consumption, and deployment cost for industrial IoT products. Integrated <strong>GNSS</strong> functionality supports <strong>GPS, GLONASS, Galileo, BeiDou, and QZSS</strong>, enabling accurate positioning, navigation, and timing without the need for an external GNSS receiver. This integration simplifies hardware design while reducing PCB area and overall system cost. The module offers a comprehensive set of hardware interfaces including <strong>USB 2.0, UART, SPI, I²C, PCM audio, GPIO, ADC, USIM, and dual RF antenna ports</strong>. It supports standard AT commands together with TCP/IP, UDP, HTTP, HTTPS, FTP, MQTT, PPP, SSL/TLS, SMS, voice, and firmware update capabilities, enabling rapid integration into cloud-connected embedded systems. Operating from a <strong>3.3V to 4.3V supply voltage</strong>, the EG91EFB-512-SNND is optimized for low-power operation while maintaining reliable performance in industrial environments. Its compact <strong>29 × 25 × 2.2 mm LGA package</strong> supports automated SMT assembly, and the industrial operating temperature range of <strong>-35°C to +75°C</strong> makes it suitable for demanding applications. The module is supported by drivers for <strong>Linux, Android, and Windows</strong> and is compatible with a wide range of ARM processors, embedded Linux platforms, industrial controllers, and custom microcontroller-based systems. Support for multiple USB networking modes enables straightforward integration into gateways, routers, and industrial communication equipment. The <strong>EG91EFB-512-SNND</strong> is widely used in <strong>industrial IoT gateways, smart utility meters, fleet management systems, GPS tracking devices, alarm and security panels, payment terminals, vending machines, agricultural monitoring equipment, transportation systems, remote telemetry units, healthcare devices, smart city infrastructure, environmental monitoring systems, industrial automation, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 1 connectivity with integrated GNSS positioning.
EG91EFB-512-SNND

Description: The EG91EFB-512-SNND is a compact LTE Category 1 cellular communi ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC25EUXGR-128-SGNS / The <strong>EC25EUXGR-128-SGNS</strong> is a compact, high-performance <strong>LTE Category 4 cellular communication module</strong> from <strong>Quectel</strong>, designed for industrial IoT, machine-to-machine (M2M), remote monitoring, transportation, security, and embedded networking applications. As a member of the proven <strong>EC25 Series</strong>, it delivers reliable global cellular connectivity together with integrated multi-constellation GNSS positioning in a compact LCC package. The module supports <strong>LTE Cat 4</strong> with download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. It is fully backward compatible with <strong>DC-HSPA+, HSPA+, WCDMA, EDGE, and GSM/GPRS</strong> networks, ensuring dependable communication even in areas where LTE coverage is unavailable. The <strong>EC25-EUX</strong> variant is optimized for Europe, the Middle East, Africa, and other supported LTE regions. Integrated <strong>GNSS positioning</strong> supports <strong>GPS, GLONASS, Galileo, BeiDou, and QZSS</strong>, allowing accurate real-time positioning, navigation, and timing without requiring a separate positioning receiver. This integration reduces PCB space, lowers system cost, and simplifies product development for tracking and location-aware applications. The EC25EUXGR-128-SGNS provides multiple hardware interfaces including <strong>USB 2.0 High-Speed, UART, PCM audio, I²C, USIM, ADC, GPIO, and dual LTE antenna connections</strong>, enabling straightforward integration with embedded processors, ARM platforms, industrial controllers, Linux gateways, and custom microcontroller-based systems. Support for standard AT commands, TCP/IP, UDP, HTTP, HTTPS, FTP, MQTT, SSL/TLS, PPP, SMS, voice, and FOTA allows rapid deployment in connected IoT products. Designed for industrial operation, the module operates from a <strong>3.3V–4.3V supply (3.8V nominal)</strong> and supports an operating temperature range of <strong>-35°C to +75°C</strong>, with extended industrial versions supporting up to <strong>-40°C to +85°C</strong>. The compact <strong>32 × 29 × 2.4 mm LCC package</strong> is optimized for automated SMT assembly and long-term field reliability. The EC25 Series is supported by comprehensive software drivers for <strong>Windows, Linux, and Android</strong>, making integration into industrial computers, routers, gateways, and embedded systems straightforward. It is compatible with multiple USB networking modes including NDIS, ECM, MBIM, and QMI depending on the target operating system and firmware configuration. The <strong>EC25EUXGR-128-SGNS</strong> is widely used in <strong>industrial IoT gateways, vehicle telematics, fleet management systems, GPS tracking devices, smart metering, industrial automation, security systems, payment terminals, digital signage, remote monitoring equipment, agricultural automation, transportation systems, medical devices, smart city infrastructure, edge computing platforms, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE Cat 4 connectivity together with integrated GNSS positioning.
EC25EUXGR-128-SGNS

Description: The EC25EUXGR-128-SGNS is a compact, high-performance LTE Categor ...
Package: TRAY | MOQ: 250 | MPQ: 250

EC25EUXGR-MINIPCIE / The <strong>EC25EUXGR-MINIPCIE</strong> is a high-performance <strong>LTE Category 4 Mini PCIe cellular communication module</strong> from <strong>Quectel</strong>, designed for industrial IoT, machine-to-machine (M2M), networking equipment, remote monitoring, transportation, and embedded communication applications. Utilizing the industry-standard <strong>Mini PCI Express</strong> form factor, the module can be integrated directly into routers, industrial computers, gateways, kiosks, and embedded systems with minimal hardware design effort. The module supports <strong>LTE Cat 4</strong> wireless communication with download speeds of up to <strong>150 Mbps</strong> and upload speeds of up to <strong>50 Mbps</strong>. It also provides seamless fallback to <strong>DC-HSPA+, HSPA+, WCDMA, EDGE, and GSM/GPRS</strong> networks, ensuring reliable connectivity even in areas where LTE service is unavailable. The EC25-EUX regional version is optimized for operation across Europe, the Middle East, Africa, and other supported LTE networks. The EC25EUXGR-MINIPCIE offers comprehensive connectivity through <strong>USB 2.0 High-Speed</strong>, <strong>UART</strong>, <strong>I²C</strong>, <strong>PCM digital audio</strong>, SIM card interface, WWAN status indicators, hardware reset, and RF disable control. It supports standard TCP/IP networking as well as PPP, FTP, HTTP, HTTPS, SSL/TLS, MQTT, SMS, voice, DFOTA firmware updates, and Quectel software services for efficient cloud connectivity. Operating from a <strong>3.0V to 3.6V supply voltage (3.3V typical)</strong>, the module is optimized for low power consumption while maintaining reliable operation in demanding environments. Typical sleep current is significantly reduced in the EUX version, making it well suited for energy-efficient industrial and IoT equipment. The industrial operating temperature range extends from <strong>-35°C to +75°C</strong>, with an extended option supporting <strong>-40°C to +80°C</strong>. The module is supplied on a <strong>full-size Mini PCIe card measuring 30.0 × 51.0 × 4.9 mm</strong>, enabling simple installation into standard Mini PCIe sockets. It is compatible with <strong>Windows 8/10/11, Linux (2.6–6.x), and Android</strong>, and supports multiple USB networking modes including NDIS, MBIM, QMI, GobiNet, and QMI_WWAN drivers for rapid software integration. The <strong>EC25EUXGR-MINIPCIE</strong> is widely used in <strong>industrial IoT gateways, LTE routers, industrial PCs, remote monitoring systems, smart metering, digital signage, transportation equipment, security systems, POS terminals, agricultural automation, smart city infrastructure, vending machines, edge computing platforms, telemetry devices, and machine-to-machine (M2M) communication applications</strong> requiring reliable high-speed LTE connectivity in a standard Mini PCIe format.
EC25EUXGR-MINIPCIE

Description: The EC25EUXGR-MINIPCIE is a high-performance LTE Category 4 Mini ...
Package: TRAY | MOQ: 100 | MPQ: 100

EG25GGB-MINIPCIE / The EG25GGB-MINIPCIE is a high-performance <strong>LTE Category 4 Mini PCIe cellular communication module</strong> from <strong>Quectel</strong>, designed for industrial IoT, wireless networking, transportation, remote monitoring, and embedded communication systems. Based on the industry-standard <strong>Mini PCI Express (Mini PCIe)</strong> form factor, it enables rapid integration into routers, gateways, industrial PCs, kiosks, and embedded computing platforms while delivering reliable global cellular connectivity. The module supports <strong>LTE Cat 4</strong> data rates of up to <strong>150 Mbps download</strong> and <strong>50 Mbps upload</strong>. It also provides backward compatibility with <strong>DC-HSDPA, HSPA+, WCDMA, EDGE, and GSM/GPRS</strong> networks, allowing seamless operation across regions with varying cellular infrastructure. Global frequency band support makes the module suitable for worldwide deployments. Integrated <strong>multi-constellation GNSS</strong> functionality supports <strong>GPS, GLONASS, BeiDou, Galileo, and QZSS</strong>, providing accurate positioning, navigation, and timing capabilities for fleet management, asset tracking, navigation terminals, and location-based IoT applications. The EG25GGB-MINIPCIE communicates through a <strong>USB 2.0 High-Speed interface</strong> while exposing additional interfaces including <strong>UART, I²C, PCM digital audio, SIM card interface, status LEDs, reset, RF disable, and multiple antenna connections for LTE diversity and GNSS</strong>. Support for TCP/IP networking, PPP, FTP, HTTP, HTTPS, MQTT, SSL/TLS, NTP, SMTP, and additional networking protocols simplifies integration into cloud-connected embedded systems. Operating from a <strong>3.0V to 3.6V supply (3.3V typical)</strong>, the module is optimized for low-power operation while maintaining industrial-grade reliability. It supports an operating temperature range of <strong>-35°C to +75°C</strong> with an extended temperature option reaching <strong>-40°C to +80°C</strong>, making it suitable for demanding industrial environments. The full-size <strong>Mini PCIe</strong> form factor measures approximately <strong>51.0 mm × 30.0 mm × 4.9 mm</strong>, allowing direct installation into standard Mini PCIe sockets commonly found in industrial computers, networking equipment, and embedded platforms. The module supports Linux, Android, and Windows operating systems and is compatible with a wide range of embedded processors and industrial controllers. The <strong>EG25GGB-MINIPCIE</strong> is widely used in <strong>industrial IoT gateways, 4G routers, industrial PCs, edge computing devices, transportation systems, fleet management, smart metering, vending machines, digital signage, remote monitoring equipment, payment terminals, wireless POS systems, security systems, medical equipment, smart city infrastructure, agricultural automation, and machine-to-machine (M2M) communication applications</strong> requiring reliable LTE connectivity with integrated GNSS positioning.
EG25GGB-MINIPCIE

Description: The EG25GGB-MINIPCIE is a high-performance LTE Category 4 Mini PCIe cellular commu ...
Package: TRAY | MOQ: 100 | MPQ: 100

EG25GGB-256-SGNS / The EG25GGB-256-SGNS is a high-performance <strong>LTE Cat 4 cellular communication module</strong> from <strong>Quectel</strong>, developed for industrial IoT, telematics, asset tracking, smart gateways, transportation, and embedded communication systems. Combining high-speed LTE connectivity with integrated multi-constellation GNSS positioning, the module provides a compact and reliable solution for connected devices requiring both wireless communication and precise location services. <br><br> The module supports <strong>LTE Cat 4</strong> with download speeds of up to <strong>150Mbps</strong> and upload speeds of up to <strong>50Mbps</strong>. It also provides full backward compatibility with <strong>UMTS/HSPA+</strong> and <strong>GSM/GPRS/EDGE</strong> networks, ensuring dependable operation in regions where LTE coverage may be limited. Integrated <strong>multi-constellation GNSS</strong> support includes <strong>GPS, GLONASS, Galileo, BeiDou, and QZSS</strong>, enabling fast positioning, high location accuracy, and reliable navigation for mobile and fixed wireless applications. The combined communication and positioning capabilities simplify hardware design while reducing overall system cost. The EG25GGB-256-SGNS operates from a <strong>3.3V to 4.3V supply voltage</strong> and integrates a powerful LTE modem platform capable of maintaining stable wireless communication in demanding industrial environments. Optimized RF performance, excellent receiver sensitivity, and output power up to <strong>33dBm</strong> help maximize network coverage and communication reliability. The module provides multiple communication interfaces including <strong>USB 2.0, UART, I²C, and PCM</strong>, allowing seamless integration with microcontrollers, embedded Linux systems, industrial computers, ARM processors, and custom hardware platforms. Support for voice, SMS, packet data, and GNSS functions enables development of complete wireless communication solutions. Designed for industrial deployment, the EG25GGB-256-SGNS supports an operating temperature range of approximately <strong>-35°C to +75°C</strong> and utilizes a compact <strong>LGA package measuring approximately 32mm × 29mm × 2.4mm</strong>. The module is optimized for automated SMT assembly and offers excellent long-term reliability in demanding environments. Built around Qualcomm's proven LTE modem architecture, the module supports secure data communication, low-latency networking, and efficient power management, making it suitable for always-connected IoT devices and industrial communication systems. Its global network compatibility simplifies product deployment across multiple regions. The <strong>EG25GGB-256-SGNS</strong> is widely used in <strong>vehicle telematics, fleet management systems, industrial IoT gateways, remote monitoring equipment, asset tracking devices, smart meters, payment terminals, transportation systems, security equipment, agricultural automation, smart city infrastructure, medical communication devices, and embedded LTE communication applications</strong> requiring reliable global cellular connectivity and integrated GNSS positioning.
EG25GGB-256-SGNS

Description: The EG25GGB-256-SGNS is a high-performance LTE Cat 4 cellular communication module ...
Package: TRAY | MOQ: 250 | MPQ: 250

ESP32-C3-MINI-1U-N4X / The ESP32-C3-MINI-1U-N4X is a compact and high-efficiency <strong>Wi-Fi and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for low-power IoT and embedded connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering reliable performance for modern embedded systems. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE</strong>, enabling stable and energy-efficient wireless communication for smart home devices, industrial automation, and wireless sensor networks. <br><br>This variant integrates <strong>4MB embedded SPI flash memory</strong> along with internal SRAM and ROM resources, providing sufficient storage and processing capability without requiring external memory components. <br><br>A key feature of the ESP32-C3-MINI-1U-N4X is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, flexible antenna placement, and enhanced RF performance in applications requiring extended range or optimized signal quality. <br><br>The module includes a rich set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB, ADC, and JTAG</strong>, enabling seamless integration with sensors, displays, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered designs and energy-efficient applications. <br><br>Packaged in a compact <strong>SMD module with castellated edges and external antenna interface</strong>, the ESP32-C3-MINI-1U-N4X is ideal for space-constrained PCB layouts and scalable product development. <br><br>The <strong>ESP32-C3-MINI-1U-N4X</strong> is widely used in applications such as <strong>smart home systems, IoT sensors, wearable devices, industrial automation, consumer electronics, and wireless control systems</strong>, where compact size, low power consumption, and reliable wireless connectivity are essential.
ESP32-C3-MINI-1U-N4X

Description: The ESP32-C3-MINI-1U-N4X is a compact and high-efficiency Wi-Fi and Bluetooth LE m ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C3-MINI-1-H4X / The ESP32-C3-MINI-1-H4X is a compact and efficient <strong>Wi-Fi and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for low-power and cost-optimized IoT applications. It is based on a <strong>32-bit single-core RISC-V processor</strong> running up to approximately <strong>160 MHz</strong>, delivering reliable performance for embedded systems. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE</strong>, enabling stable wireless communication for smart home devices, industrial automation, and consumer electronics. <br><br>It integrates <strong>4MB embedded flash memory</strong> within the chip package, simplifying PCB design and reducing the need for external memory components. <br><br>The ESP32-C3-MINI-1-H4X features an <strong>on-board PCB antenna</strong>, providing a compact RF solution with reliable signal performance while minimizing external components. <br><br>The module offers a rich set of peripherals including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB, and JTAG</strong>, allowing flexible integration with sensors, displays, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and supporting industrial temperature ranges, the device is suitable for both consumer and industrial applications. <br><br>Packaged in a compact <strong>SMD module with castellated edges</strong>, the ESP32-C3-MINI-1-H4X is ideal for space-constrained PCB layouts and mass production. <br><br>The <strong>ESP32-C3-MINI-1-H4X</strong> is widely used in applications such as <strong>smart home systems, IoT sensors, wearable devices, industrial automation, and wireless control systems</strong>, where low power consumption, compact size, and reliable connectivity are essential.
ESP32-C3-MINI-1-H4X

Description: The ESP32-C3-MINI-1-H4X is a compact and efficient Wi-Fi and Bluetooth LE microcon ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C3-MINI-1-N4X / The ESP32-C3-MINI-1-N4X is a compact and high-efficiency <strong>Wi-Fi and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for cost-sensitive and low-power IoT applications. It is based on a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering reliable performance for embedded systems. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE</strong>, enabling stable wireless connectivity for a wide range of IoT, smart home, and industrial applications. <br><br>It integrates <strong>4MB SPI flash memory</strong> along with internal SRAM and ROM resources, providing sufficient storage and processing capability for firmware and application data without requiring external memory. <br><br>The ESP32-C3-MINI-1-N4X features an <strong>on-board PCB antenna</strong>, ensuring a compact design and simplified RF layout while maintaining reliable wireless performance. <br><br>The module offers a wide range of peripherals including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB, ADC, and JTAG</strong>, allowing flexible integration with sensors, displays, and other embedded components. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered designs and energy-efficient systems. <br><br>Packaged in a compact <strong>SMD module with castellated edges</strong>, the ESP32-C3-MINI-1-N4X is ideal for space-constrained PCB layouts and mass production applications. <br><br>The <strong>ESP32-C3-MINI-1-N4X</strong> is widely used in applications such as <strong>smart home devices, IoT sensors, wearable electronics, industrial automation, consumer electronics, and wireless control systems</strong>, where low power consumption, compact size, and reliable connectivity are essential.
ESP32-C3-MINI-1-N4X

Description: The ESP32-C3-MINI-1-N4X is a compact and high-efficiency Wi-Fi and Bluetooth LE mi ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-MINI-1U-N4 / The ESP32-C5-MINI-1U-N4 is a compact and high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and embedded wireless applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with low power consumption. <br><br>The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br>This variant integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and embedded applications while maintaining a compact and efficient design. <br><br>A key feature of the ESP32-C5-MINI-1U-N4 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, flexible antenna placement, and enhanced RF performance in long-range or complex wireless environments. <br><br>The module includes a wide range of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, CAN FD, ADC, and timers</strong>, enabling flexible integration with sensors, industrial interfaces, and embedded systems. <br><br>With support for advanced Wi-Fi 6 features such as <strong>OFDMA and improved multi-device communication</strong>, the device is optimized for high-density wireless environments and efficient data transmission. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is suitable for low-power and battery-operated designs. <br><br>Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C5-MINI-1U-N4 is ideal for space-constrained PCB layouts and scalable product development. <br><br>The <strong>ESP32-C5-MINI-1U-N4</strong> is widely used in applications such as <strong>smart home systems, industrial automation, wireless sensors, IoT gateways, consumer electronics, and next-generation connected devices</strong>, where compact size, dual-band connectivity, and energy efficiency are essential.
ESP32-C5-MINI-1U-N4

Description: The ESP32-C5-MINI-1U-N4 is a compact and high-performance dual-band Wi-Fi 6 and Bl ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-MINI-1-N4 / The ESP32-C5-MINI-1-N4 is a compact and high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for modern IoT and embedded wireless applications. It is based on a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing with low power consumption. <br><br> The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into advanced IoT ecosystems. <br><br> It integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and embedded applications while keeping the design simple and cost-effective. <br><br> The ESP32-C5-MINI-1-N4 features an <strong>on-board PCB antenna</strong>, allowing compact PCB layouts and reliable RF performance without requiring external antenna components. <br><br> The module includes a wide range of interfaces such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, CAN FD, ADC, and timers</strong>, enabling flexible integration with sensors, industrial interfaces, and embedded systems. <br><br> With support for advanced Wi-Fi 6 features such as <strong>OFDMA and improved multi-device communication</strong>, the device is optimized for high-density wireless environments and efficient data transmission. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is suitable for low-power and battery-operated designs. <br><br> Packaged in a compact <strong>SMD module with castellated edges</strong>, the ESP32-C5-MINI-1-N4 is ideal for space-constrained PCB designs and scalable product development. <br><br> The <strong>ESP32-C5-MINI-1-N4</strong> is widely used in applications such as <strong>smart home systems, industrial automation, wireless sensors, IoT gateways, consumer electronics, and next-generation connected devices</strong>, where compact size, multi-protocol connectivity, and energy efficiency are critical.
ESP32-C5-MINI-1-N4

Description: The ESP32-C5-MINI-1-N4 is a compact and high-performance dual-band Wi-Fi 6 and Blu ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1U-N32R8 / The ESP32-C5-WROOM-1U-N32R8 is a high-end <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT, edge computing, and high-performance embedded applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing with low power consumption. <br><br> The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling full multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br> This variant integrates <strong>32MB SPI flash and 8MB PSRAM</strong>, offering extensive memory capacity for complex firmware, real-time data processing, OTA updates, and advanced edge computing applications. <br><br> A key feature of the ESP32-C5-WROOM-1U-N32R8 is its <strong>U.FL (IPEX) connector for external antenna</strong>, providing improved signal strength, flexible antenna placement, and enhanced RF performance in long-range or high-interference environments. <br><br> With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the module delivers higher throughput, reduced latency, and improved reliability compared to traditional single-band solutions. <br><br> The device includes a rich set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB Serial/JTAG, ADC, and CAN FD</strong>, enabling seamless integration with sensors, industrial interfaces, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C5-WROOM-1U-N32R8 is ideal for high-density PCB layouts and scalable product development. <br><br> The <strong>ESP32-C5-WROOM-1U-N32R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, AIoT devices, edge computing systems, and next-generation connected products</strong>, where dual-band connectivity, large memory capacity, and multi-protocol support are critical.
ESP32-C5-WROOM-1U-N32R8

Description: The ESP32-C5-WROOM-1U-N32R8 is a high-end dual-band Wi-Fi 6 and Bluetooth LE micro ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1U-N16R8 / The ESP32-C5-WROOM-1U-N16R8 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with low power consumption. <br><br> The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br> This variant integrates <strong>16MB SPI flash and 8MB PSRAM</strong>, providing large memory capacity for complex firmware, OTA updates, buffering, and edge computing applications. <br><br> A key feature of the ESP32-C5-WROOM-1U-N16R8 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, flexible antenna placement, and enhanced RF performance in long-range or complex wireless environments. <br><br> With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the module offers reduced interference, higher throughput, and more stable connectivity compared to traditional single-band solutions. <br><br> The device includes a rich set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB Serial/JTAG, ADC, and CAN FD</strong>, enabling flexible integration with sensors, industrial interfaces, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C5-WROOM-1U-N16R8 is ideal for high-density PCB layouts and scalable product development. <br><br> The <strong>ESP32-C5-WROOM-1U-N16R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity, high memory capacity, and flexible RF design are critical.
ESP32-C5-WROOM-1U-N16R8

Description: The ESP32-C5-WROOM-1U-N16R8 is a high-performance dual-band Wi-Fi 6 and Bluetooth ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1U-N4 / The ESP32-C5-WROOM-1U-N4 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with low power consumption. <br><br> The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br> This variant integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and embedded applications while maintaining a compact and efficient hardware design. <br><br> A key feature of the ESP32-C5-WROOM-1U-N4 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, flexible antenna placement, and enhanced RF performance in long-range or complex wireless environments. <br><br> The module includes a rich set of interfaces such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB Serial/JTAG, ADC, and CAN</strong>, enabling seamless integration with sensors, industrial interfaces, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA and improved multi-device communication</strong>, the device is optimized for high-density wireless environments and efficient data transmission. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is suitable for low-power and battery-operated designs while maintaining strong wireless performance. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C5-WROOM-1U-N4 is ideal for high-density PCB layouts and scalable product development. <br><br> The <strong>ESP32-C5-WROOM-1U-N4</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity, flexible RF design, and energy efficiency are critical.
ESP32-C5-WROOM-1U-N4

Description: The ESP32-C5-WROOM-1U-N4 is a high-performance dual-band Wi-Fi 6 and Bluetooth LE ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1U-N8R8 / The ESP32-C5-WROOM-1U-N8R8 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with low power consumption. <br><br>The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br>With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the device provides improved network performance, reduced interference, and enhanced reliability compared to single-band solutions. <br><br>This variant integrates <strong>8MB SPI flash and 8MB PSRAM</strong>, offering substantial memory resources for complex firmware, OTA updates, and data-intensive embedded applications. <br><br>A key feature of the ESP32-C5-WROOM-1U-N8R8 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement for long-range or challenging wireless environments. <br><br>The module includes a comprehensive set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB Serial/JTAG, ADC, and CAN</strong>, enabling seamless integration with sensors, industrial interfaces, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br>Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C5-WROOM-1U-N8R8 is ideal for high-density PCB layouts and scalable product development. <br><br>The <strong>ESP32-C5-WROOM-1U-N8R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity, high memory capacity, and flexible RF design are critical.
ESP32-C5-WROOM-1U-N8R8

Description: The ESP32-C5-WROOM-1U-N8R8 is a high-performance dual-band Wi-Fi 6 and Bluetooth L ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1-N32R8 / The ESP32-C5-WROOM-1-N32R8 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with low power consumption. <br><br>The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (IEEE 802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br>This variant integrates <strong>32MB SPI flash and 8MB PSRAM</strong>, offering significantly expanded memory capacity for complex firmware, OTA updates, edge computing tasks, and data-intensive applications. <br><br>With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the ESP32-C5-WROOM-1-N32R8 provides improved network performance, reduced interference, and enhanced reliability compared to single-band solutions. <br><br>The module features an <strong>integrated PCB antenna</strong>, ensuring compact design and stable RF performance without requiring an external antenna. <br><br>It includes a comprehensive set of peripherals such as <strong>SPI, I2C, UART, I2S, PWM, USB Serial/JTAG, CAN FD, ADC, and GPIO</strong>, enabling flexible integration with sensors, industrial interfaces, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C5-WROOM-1-N32R8 is ideal for high-density PCB layouts and scalable product development. <br><br>The <strong>ESP32-C5-WROOM-1-N32R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, edge computing devices, and next-generation connected products</strong>, where dual-band connectivity, large memory capacity, and multi-protocol support are critical.
ESP32-C5-WROOM-1-N32R8

Description: The ESP32-C5-WROOM-1-N32R8 is a high-performance dual-band Wi-Fi 6 and Bluetooth L ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1-N16R8 / The ESP32-C5-WROOM-1-N16R8 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with low power consumption. <br><br>The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br>This variant integrates <strong>16MB SPI flash and 8MB PSRAM</strong>, providing substantial memory resources for complex embedded applications, OTA updates, and high-throughput data processing. <br><br>With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the ESP32-C5-WROOM-1-N16R8 offers improved network performance, reduced interference, and enhanced reliability compared to single-band solutions. <br><br>The module features an <strong>integrated PCB antenna</strong>, ensuring compact design and stable RF performance without requiring external antenna components. <br><br>It includes a comprehensive set of peripherals such as <strong>SPI, I2C, UART, I2S, PWM, USB Serial/JTAG, CAN FD, ADC, and GPIO</strong>, allowing flexible integration with sensors, industrial interfaces, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C5-WROOM-1-N16R8 is ideal for high-density PCB layouts and scalable product development. <br><br>The <strong>ESP32-C5-WROOM-1-N16R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity, high memory capacity, and multi-protocol support are critical.
ESP32-C5-WROOM-1-N16R8

Description: The ESP32-C5-WROOM-1-N16R8 is a high-performance dual-band Wi-Fi 6 and Bluetooth L ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1-N8R8 / The ESP32-C5-WROOM-1-N8R8 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with low power consumption. <br><br>The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread (802.15.4)</strong>, enabling true multi-protocol connectivity and seamless integration into modern IoT ecosystems. <br><br>With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the device offers improved network performance, reduced interference, and enhanced reliability compared to single-band solutions. <br><br>This variant integrates <strong>8MB SPI flash and 8MB PSRAM</strong>, providing substantial memory resources for data buffering, OTA updates, and complex embedded applications. <br><br>The ESP32-C5-WROOM-1-N8R8 features an <strong>on-board PCB antenna</strong>, ensuring compact design and stable RF performance without requiring an external antenna. <br><br>It offers a rich set of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB, JTAG, and ADC</strong>, allowing flexible integration with sensors, peripherals, and embedded systems. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C5-WROOM-1-N8R8 is ideal for high-density PCB layouts and scalable product development. <br><br>The <strong>ESP32-C5-WROOM-1-N8R8</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity, high memory capacity, and multi-protocol support are critical.
ESP32-C5-WROOM-1-N8R8

Description: The ESP32-C5-WROOM-1-N8R8 is a high-performance dual-band Wi-Fi 6 and Bluetooth LE ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C5-WROOM-1-N4 / The ESP32-C5-WROOM-1-N4 is a high-performance <strong>dual-band Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and wireless communication applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with low power consumption. <br><br> The module supports <strong>2.4 GHz and 5 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee, and Thread</strong>, enabling true multi-protocol connectivity and flexible integration into modern IoT ecosystems. <br><br> With support for <strong>dual-band Wi-Fi (2.4GHz + 5GHz)</strong>, the ESP32-C5-WROOM-1-N4 offers improved network performance, reduced interference, and higher reliability compared to single-band solutions. <br><br> The module integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and application data while simplifying hardware design by eliminating the need for external memory components. <br><br> It features an <strong>on-board PCB antenna</strong>, ensuring compact design and stable RF performance without requiring an external antenna. <br><br> The ESP32-C5-WROOM-1-N4 includes a rich set of peripherals such as <strong>SPI, I2C, UART, I2S, PWM, USB, ADC, CAN, and GPIO</strong>, enabling flexible integration with sensors, industrial interfaces, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C5-WROOM-1-N4 is ideal for high-density PCB layouts and scalable product development. <br><br> The <strong>ESP32-C5-WROOM-1-N4</strong> is widely used in applications such as <strong>smart home systems, industrial automation, IoT gateways, wireless sensors, smart appliances, and next-generation connected devices</strong>, where dual-band connectivity and multi-protocol support are critical.
ESP32-C5-WROOM-1-N4

Description: The ESP32-C5-WROOM-1-N4 is a high-performance dual-band Wi-Fi 6 and Bluetooth LE m ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C61-MINI-1U-N4 / The ESP32-C61-MINI-1U-N4 is a compact and cost-efficient <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for modern IoT and embedded connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient processing performance with low power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax) and Bluetooth 5 LE</strong>, enabling reliable communication with improved performance in dense wireless environments through technologies such as OFDMA and enhanced multi-device connectivity. <br><br> This variant integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and embedded applications while maintaining a compact design without requiring external memory components. <br><br> A key feature of the ESP32-C61-MINI-1U-N4 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, flexible antenna placement, and enhanced RF performance in challenging environments or long-range applications. <br><br> The module includes a wide range of interfaces such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, enabling seamless integration with sensors, peripherals, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C61-MINI-1U-N4 is ideal for high-density PCB layouts and scalable IoT product development. <br><br> The <strong>ESP32-C61-MINI-1U-N4</strong> is widely used in applications such as <strong>smart home systems, wireless sensors, industrial automation, IoT gateways, portable devices, and next-generation connected systems</strong>, where compact size, reliable connectivity, and flexible RF design are essential.
ESP32-C61-MINI-1U-N4

Description: The ESP32-C61-MINI-1U-N4 is a compact and cost-efficient Wi-Fi 6 and Bluetooth LE ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C61-MINI-1-N4 / The ESP32-C61-MINI-1-N4 is a compact and cost-efficient <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for modern IoT and embedded applications requiring reliable wireless connectivity. It is based on a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, providing efficient performance with low power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax) and Bluetooth 5 LE</strong>, enabling stable and efficient communication in dense network environments with improved multi-device handling and power-saving features. <br><br> It integrates <strong>4MB SPI flash memory</strong>, offering sufficient storage for firmware and application data while simplifying hardware design by eliminating the need for external memory components. <br><br> The ESP32-C61-MINI-1-N4 features an <strong>on-board PCB antenna</strong>, providing a compact and cost-effective RF solution while maintaining reliable wireless performance without requiring an external antenna. <br><br> It includes a rich set of interfaces such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, allowing flexible integration with sensors, peripherals, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module form factor with castellated edges</strong>, the ESP32-C61-MINI-1-N4 is ideal for high-density PCB layouts and rapid product development. <br><br> The <strong>ESP32-C61-MINI-1-N4</strong> is widely used in applications such as <strong>smart home systems, IoT devices, wireless sensors, industrial automation, consumer electronics, and embedded control systems</strong>, where compact size, low power consumption, and reliable wireless connectivity are essential.
ESP32-C61-MINI-1-N4

Description: The ESP32-C61-MINI-1-N4 is a compact and cost-efficient Wi-Fi 6 and Bluetooth LE m ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C61-WROOM-1U-N8R2 / The ESP32-C61-WROOM-1U-N8R2 is a cost-efficient and high-performance <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for modern IoT and embedded connectivity applications. It is built around a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient processing with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax) and Bluetooth 5 LE</strong>, enabling reliable wireless communication with improved performance in dense network environments through features such as OFDMA and enhanced multi-device connectivity. <br><br> This variant integrates <strong>8MB SPI flash and 2MB PSRAM</strong>, providing extended memory capacity for data buffering, firmware storage, and more complex embedded applications. <br><br> A key feature of the ESP32-C61-WROOM-1U-N8R2 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement in demanding environments or long-range applications. <br><br> The module includes a rich set of interfaces such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C61-WROOM-1U-N8R2 is ideal for high-density PCB layouts and scalable IoT product development. <br><br> The <strong>ESP32-C61-WROOM-1U-N8R2</strong> is widely used in applications such as <strong>smart home systems, industrial automation, wireless sensors, IoT gateways, data loggers, and next-generation connected devices</strong>, where reliable connectivity, extended memory, and flexible RF design are essential.
ESP32-C61-WROOM-1U-N8R2

Description: The ESP32-C61-WROOM-1U-N8R2 is a cost-efficient and high-performance Wi-Fi 6 and B ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C61-WROOM-1-N8R2 / The ESP32-C61-WROOM-1-N8R2 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for cost-effective and high-performance IoT applications. It is built around a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient processing performance with low power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax) and Bluetooth 5 LE</strong>, enabling reliable wireless connectivity with improved performance in dense network environments through technologies such as OFDMA and enhanced multi-device handling. <br><br> This variant integrates <strong>8MB SPI flash and 2MB PSRAM</strong>, providing extended memory capacity for data buffering, firmware storage, and more complex embedded applications. <br><br> The ESP32-C61-WROOM-1-N8R2 features an <strong>on-board PCB antenna</strong>, offering a compact and cost-effective RF solution while maintaining stable wireless performance. <br><br> It includes a wide range of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, allowing flexible integration with sensors, displays, and external devices in embedded systems. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C61-WROOM-1-N8R2 is ideal for high-density PCB layouts and scalable IoT product development. <br><br> The <strong>ESP32-C61-WROOM-1-N8R2</strong> is widely used in applications such as <strong>smart home systems, industrial automation, wireless sensors, IoT gateways, data loggers, and next-generation connected devices</strong>, where efficient wireless communication and extended memory are essential.
ESP32-C61-WROOM-1-N8R2

Description: The ESP32-C61-WROOM-1-N8R2 is a next-generation Wi-Fi 6 and Bluetooth LE microcont ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1U-N16 / The ESP32-C6-WROOM-1U-N16 is an advanced <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and smart connectivity applications. It is built around a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems, smart home devices, and industrial systems. <br><br> This variant integrates <strong>16MB SPI flash memory</strong>, providing significantly increased storage capacity for firmware, OTA updates, and data-intensive applications. <br><br> A key feature of the module is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement for long-range or complex wireless environments. <br><br> The ESP32-C6-WROOM-1U-N16 offers a rich set of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, enabling seamless integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA, MU-MIMO, and Target Wake Time (TWT)</strong>, the module is optimized for high-density wireless environments and energy-efficient communication. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is suitable for low-power and battery-operated designs while maintaining high connectivity performance. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-WROOM-1U-N16 is ideal for high-density PCB layouts and applications requiring enhanced wireless range and reliability. <br><br> The <strong>ESP32-C6-WROOM-1U-N16</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-WROOM-1U-N16

Description: The ESP32-C6-WROOM-1U-N16 is an advanced Wi-Fi 6 and Bluetooth LE microcontroller ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1U-N8 / The ESP32-C6-WROOM-1U-N8 is a high-performance <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and smart connectivity applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient processing performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> This variant integrates <strong>8MB SPI flash memory</strong>, providing extended storage capacity for firmware, OTA updates, and data-intensive embedded applications. <br><br> A key feature of the ESP32-C6-WROOM-1U-N8 is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, enhanced RF performance, and flexible antenna placement in demanding environments. <br><br> The module offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, and ADC</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 features such as <strong>OFDMA and efficient multi-device communication</strong>, the device is optimized for high-density wireless environments and scalable IoT deployments. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and supporting industrial temperature ranges, the module is suitable for both consumer and industrial applications. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-WROOM-1U-N8 is ideal for high-density PCB layouts and applications requiring extended wireless range and reliable connectivity. <br><br> The <strong>ESP32-C6-WROOM-1U-N8</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-WROOM-1U-N8

Description: The ESP32-C6-WROOM-1U-N8 is a high-performance Wi-Fi 6 and Bluetooth LE microcontr ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1U-N4 / The ESP32-C6-WROOM-1U-N4 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong> running up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> It integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and embedded applications without requiring external memory components. <br><br> This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, enhanced RF performance, and flexible antenna placement for long-range or complex RF environments. <br><br> The ESP32-C6-WROOM-1U-N4 offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, and ADC</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA and improved multi-device connectivity</strong>, the module is optimized for high-density wireless environments and efficient communication. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and supporting industrial temperature ranges, the device is suitable for both consumer and industrial applications. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-WROOM-1U-N4 is ideal for high-density PCB layouts and applications requiring extended wireless range and reliable connectivity. <br><br> The <strong>ESP32-C6-WROOM-1U-N4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity and energy efficiency are critical.
ESP32-C6-WROOM-1U-N4

Description: The ESP32-C6-WROOM-1U-N4 is a next-generation Wi-Fi 6 and Bluetooth LE microcontro ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1-N16 / The ESP32-C6-WROOM-1-N16 is an advanced <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and smart connectivity applications. It is built around a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> This variant integrates <strong>16MB SPI flash memory</strong>, providing significantly increased storage capacity for firmware, OTA updates, and data-intensive embedded applications. <br><br> The ESP32-C6-WROOM-1-N16 features an <strong>on-board PCB antenna</strong>, offering a compact and cost-effective RF solution while maintaining reliable wireless performance without the need for external antenna components. <br><br> It includes a comprehensive set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, enabling flexible integration with sensors, displays, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA, MU-MIMO, and Target Wake Time (TWT)</strong>, the module is optimized for high-density wireless environments and energy-efficient communication. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and an industrial temperature range, the device is suitable for both consumer and industrial applications. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-WROOM-1-N16 is ideal for high-density PCB layouts and modern embedded designs. <br><br> The <strong>ESP32-C6-WROOM-1-N16</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-WROOM-1-N16

Description: The ESP32-C6-WROOM-1-N16 is an advanced Wi-Fi 6 and Bluetooth LE microcontroller m ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1-N8 / The ESP32-C6-WROOM-1-N8 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is built around a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> This variant integrates <strong>8MB SPI flash memory</strong>, providing extended storage capacity for firmware, OTA updates, and data-intensive embedded applications. <br><br> The ESP32-C6-WROOM-1-N8 features an <strong>on-board PCB antenna</strong>, allowing compact design and reliable RF performance without the need for an external antenna. <br><br> It offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, and ADC</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA and MU-MIMO</strong>, the module is optimized for high-density wireless environments and efficient communication. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and an industrial temperature range, the device is suitable for both consumer and industrial applications. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-WROOM-1-N8 is ideal for high-density PCB layouts and modern embedded designs. <br><br> The <strong>ESP32-C6-WROOM-1-N8</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-WROOM-1-N8

Description: The ESP32-C6-WROOM-1-N8 is a next-generation Wi-Fi 6 and Bluetooth LE microcontrol ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-WROOM-1-N4 / The ESP32-C6-WROOM-1-N4 is an advanced <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and smart connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread (IEEE 802.15.4)</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> It integrates <strong>4MB SPI flash memory</strong> along with internal memory resources, providing sufficient storage for firmware and embedded applications without requiring external memory components. <br><br> The ESP32-C6-WROOM-1-N4 features an <strong>on-board PCB antenna</strong>, offering a compact and cost-effective RF solution while maintaining reliable wireless performance. <br><br> It includes a comprehensive set of peripherals such as <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, ADC, and timers</strong>, enabling flexible integration with sensors, displays, and external components. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA, MU-MIMO, and Target Wake Time (TWT)</strong>, the module is optimized for high-density wireless environments and low-power operation. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and an industrial temperature range, the device is suitable for both consumer and industrial applications. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-WROOM-1-N4 is ideal for high-density PCB layouts and modern embedded designs. <br><br> The <strong>ESP32-C6-WROOM-1-N4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity and energy efficiency are essential.
ESP32-C6-WROOM-1-N4

Description: The ESP32-C6-WROOM-1-N4 is an advanced Wi-Fi 6 and Bluetooth LE microcontroller mo ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1U-H8 / The ESP32-C6-MINI-1U-H8 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is powered by a <strong>32-bit single-core RISC-V processor</strong> operating up to approximately <strong>160 MHz</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems, smart home devices, and industrial networks. <br><br> This variant integrates <strong>8MB SPI flash memory</strong>, providing extended storage capacity for firmware, OTA updates, and data-intensive applications, making it ideal for complex embedded systems. <br><br> A key feature of this module is its <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, enhanced RF performance, and flexible antenna placement in challenging environments or long-range applications. <br><br> The ESP32-C6-MINI-1U-H8 offers a rich set of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB, and JTAG</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 features such as <strong>OFDMA and efficient multi-device communication</strong>, the module is optimized for high-density wireless environments and scalable IoT deployments. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is suitable for low-power and battery-operated designs. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-MINI-1U-H8 is ideal for high-density PCB layouts and applications requiring enhanced wireless range and reliability. <br><br> The <strong>ESP32-C6-MINI-1U-H8</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-MINI-1U-H8

Description: The ESP32-C6-MINI-1U-H8 is a next-generation Wi-Fi 6 and Bluetooth LE microcontrol ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1U-H4 / The ESP32-C6-MINI-1U-H4 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling seamless multi-protocol communication for modern IoT ecosystems and smart home devices. <br><br> It integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and application data while simplifying system design by eliminating the need for external memory. <br><br> This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, enhanced RF performance, and flexible antenna placement in demanding environments. <br><br> The ESP32-C6-MINI-1U-H4 offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB, and JTAG</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> With support for advanced Wi-Fi 6 technologies such as <strong>OFDMA and improved multi-device connectivity</strong>, the module is optimized for high-density wireless environments and efficient communication. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong> and an extended temperature range up to <strong>+105°C</strong>, the device is suitable for industrial and demanding applications. <br><br> Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-MINI-1U-H4 is ideal for high-density PCB layouts and applications requiring extended wireless range and reliability. <br><br> The <strong>ESP32-C6-MINI-1U-H4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, reliability, and energy efficiency are critical.
ESP32-C6-MINI-1U-H4

Description: The ESP32-C6-MINI-1U-H4 is a next-generation Wi-Fi 6 and Bluetooth LE microcontrol ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1U-N4 / The ESP32-C6-MINI-1U-N4 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with low power consumption. <br><br>The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling seamless multi-protocol communication for modern IoT ecosystems and smart home devices. <br><br>The ESP32-C6-MINI-1U-N4 integrates <strong>4MB SPI flash memory</strong>, providing sufficient storage for firmware and application data without requiring external memory components. <br><br>This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement compared to PCB antenna versions. <br><br>The module offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB, and JTAG</strong>, ensuring flexible integration with sensors, peripherals, and embedded systems. <br><br>Supporting advanced Wi-Fi 6 features such as <strong>OFDMA and improved multi-device connectivity</strong>, the device is optimized for high-density wireless environments and efficient communication. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is suitable for low-power and battery-powered designs. <br><br>Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-C6-MINI-1U-N4 is ideal for high-density PCB layouts and applications requiring enhanced wireless range and reliability. <br><br>The <strong>ESP32-C6-MINI-1U-N4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity and energy efficiency are critical.
ESP32-C6-MINI-1U-N4

Description: The ESP32-C6-MINI-1U-N4 is a next-generation Wi-Fi 6 and Bluetooth LE microcontrol ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1-H8 / The ESP32-C6-MINI-1-H8 is an advanced <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for next-generation IoT and smart connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with optimized power consumption. <br><br> The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br> This variant integrates <strong>8MB flash memory</strong>, providing increased storage capacity for firmware, OTA updates, and data-intensive applications compared to lower-memory versions. <br><br> With support for advanced Wi-Fi 6 features such as <strong>OFDMA, MU-MIMO, and improved multi-device connectivity</strong>, the module is optimized for high-density wireless environments and efficient communication. <br><br> The ESP32-C6-MINI-1-H8 offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, USB Serial/JTAG, and ADC</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br> It features an <strong>integrated PCB antenna</strong>, simplifying RF design and reducing the need for external components while maintaining reliable wireless performance. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-MINI-1-H8 is ideal for high-density PCB layouts and modern embedded designs. <br><br> The <strong>ESP32-C6-MINI-1-H8</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity, extended memory, and energy efficiency are critical.
ESP32-C6-MINI-1-H8

Description: The ESP32-C6-MINI-1-H8 is an advanced Wi-Fi 6 and Bluetooth LE microcontroller mod ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1-H4 / The ESP32-C6-MINI-1-H4 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is powered by a <strong>single-core 32-bit RISC-V processor</strong>, delivering efficient performance with optimized power consumption. <br><br>The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling seamless multi-protocol wireless communication for modern IoT ecosystems and smart home devices. <br><br>It integrates <strong>4MB flash memory</strong>, providing sufficient storage for firmware and data without requiring external memory components, simplifying hardware design. <br><br>The ESP32-C6-MINI-1-H4 features a <strong>PCB onboard antenna</strong>, ensuring compact design and reliable RF performance without the need for an external antenna. <br><br>It offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB, and JTAG</strong>, enabling flexible integration with sensors, peripherals, and embedded systems. <br><br>With support for advanced Wi-Fi 6 features such as <strong>OFDMA and improved multi-device connectivity</strong>, the module is optimized for high-density wireless environments and efficient communication. <br><br>The device operates within a supply voltage range of <strong>3.0V to 3.6V</strong>, making it suitable for low-power and battery-operated designs. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-MINI-1-H4 is ideal for high-density PCB layouts and modern embedded designs. <br><br>The <strong>ESP32-C6-MINI-1-H4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity and energy efficiency are essential.
ESP32-C6-MINI-1-H4

Description: The ESP32-C6-MINI-1-H4 is a next-generation Wi-Fi 6 and Bluetooth LE microcontroll ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-C6-MINI-1-N4 / The ESP32-C6-MINI-1-N4 is a next-generation <strong>Wi-Fi 6 and Bluetooth LE microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and smart connectivity applications. It is based on a <strong>32-bit single-core RISC-V processor</strong>, delivering efficient performance with low power consumption. <br><br>The module supports <strong>2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread</strong>, enabling multi-protocol wireless communication for modern IoT ecosystems and smart home networks. <br><br>The ESP32-C6-MINI-1-N4 integrates <strong>4MB flash memory</strong>, providing sufficient storage for firmware and data without requiring external memory components. <br><br>It offers a wide range of interfaces including <strong>GPIO, SPI, I2C, I2S, UART, PWM, SDIO, USB, and JTAG</strong>, allowing flexible integration with sensors, peripherals, and external systems. <br><br>Designed for high-efficiency wireless communication, the module supports data rates up to approximately <strong>150 Mbps</strong> and includes features such as <strong>OFDMA and improved multi-device connectivity</strong>, making it suitable for dense IoT environments. <br><br>The device operates within a supply voltage range of <strong>3.0V to 3.6V</strong> and features an integrated <strong>PCB antenna</strong>, simplifying RF design and reducing external component requirements. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-C6-MINI-1-N4 is optimized for high-density PCB layouts and modern embedded designs. <br><br>The <strong>ESP32-C6-MINI-1-N4</strong> is widely used in applications such as <strong>smart home systems, IoT gateways, industrial automation, wireless sensors, Matter-compatible devices, and next-generation connected products</strong>, where multi-protocol connectivity and energy efficiency are critical.
ESP32-C6-MINI-1-N4

Description: The ESP32-C6-MINI-1-N4 is a next-generation Wi-Fi 6 and Bluetooth LE microcontroll ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-MINI-1U-N4 / The ESP32-S2-MINI-2-N4 is a compact and efficient <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for space-constrained IoT and embedded applications. It is powered by a <strong>single-core Xtensa LX7 processor</strong> running up to 240 MHz, delivering reliable performance for control and communication tasks. <br><br> The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, enabling stable and efficient wireless connectivity across a wide range of applications. <br><br> It integrates <strong>4MB embedded flash memory</strong> along with internal SRAM and ROM, eliminating the need for external storage components and simplifying hardware design. <br><br> The ESP32-S2-MINI-2-N4 includes a comprehensive set of peripheral interfaces such as <strong>SPI, I2C, UART, I2S, PWM, ADC, GPIO, and USB</strong>, allowing flexible integration with sensors, displays, and external devices. <br><br> It features an integrated <strong>PCB antenna</strong>, providing a compact and cost-effective RF solution without requiring an external antenna, while maintaining reliable wireless performance. <br><br> Operating within a supply voltage range of approximately <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient systems. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-S2-MINI-2-N4 is ideal for high-density PCB layouts and rapid product development. <br><br> The <strong>ESP32-S2-MINI-2-N4</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, USB-enabled products, industrial automation, and embedded control systems</strong>, where compact size and reliable Wi-Fi connectivity are essential.
ESP32-S2-MINI-1U-N4

Description: The ESP32-S2-MINI-2-N4 is a compact and efficient Wi-Fi microcontroller module ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-MINI-1-N4R2 / The ESP32-S2-MINI-1-N4R2 is a compact and high-performance <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and embedded applications requiring enhanced memory capacity. It is built around a <strong>single-core Xtensa LX7 processor</strong> operating up to 240 MHz, delivering reliable processing performance for control and data-intensive tasks. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, ensuring stable wireless connectivity across a wide range of applications. <br><br>It integrates <strong>4MB flash memory and 2MB PSRAM</strong>, providing increased memory resources for buffering, data logging, and more complex firmware compared to standard variants. <br><br>The ESP32-S2-MINI-1-N4R2 includes a rich set of peripheral interfaces such as <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, USB OTG, and GPIO</strong>, enabling flexible integration with sensors, displays, and external devices in embedded systems. <br><br>Featuring an <strong>integrated PCB antenna</strong>, the module provides a compact and cost-effective RF solution without requiring an external antenna, simplifying design and reducing BOM cost. <br><br>Operating within a supply voltage range of approximately <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br>Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-S2-MINI-1-N4R2 is ideal for high-density PCB layouts and rapid product development. <br><br>The <strong>ESP32-S2-MINI-1-N4R2</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, USB-enabled devices, industrial automation, and embedded control systems</strong>, where compact size, extended memory, and reliable Wi-Fi connectivity are essential.
ESP32-S2-MINI-1-N4R2

Description: The ESP32-S2-MINI-1-N4R2 is a compact and high-performance Wi-Fi microcontroller m ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-MINI-1-N4 / The ESP32-S2-MINI-1-N4 is a compact and efficient <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for space-constrained IoT and embedded applications. It is powered by a <strong>single-core Xtensa LX7 processor</strong> running up to 240 MHz, delivering reliable performance for control and communication tasks. <br><br> The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, enabling stable and efficient wireless connectivity across a wide range of applications. <br><br> It integrates <strong>4MB embedded flash memory</strong>, eliminating the need for external storage components and simplifying hardware design. <br><br> The ESP32-S2-MINI-1-N4 includes a rich set of peripheral interfaces such as <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, USB OTG, and GPIO</strong>, allowing flexible integration with sensors, displays, and other external devices. <br><br> Featuring an <strong>on-board PCB antenna</strong>, the module provides a compact and cost-effective RF solution without requiring an external antenna. <br><br> Operating within a supply voltage range of approximately <strong>3.0V to 3.6V</strong>, it is optimized for low-power operation, making it suitable for battery-powered and energy-efficient designs. <br><br> Packaged in a small <strong>SMD module form factor (approx. 15.4 × 20 mm)</strong>, the ESP32-S2-MINI-1-N4 is ideal for high-density PCB layouts and rapid product development. <br><br> The <strong>ESP32-S2-MINI-1-N4</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, USB-enabled devices, industrial automation, and wearable electronics</strong>, where compact size and reliable Wi-Fi connectivity are essential.
ESP32-S2-MINI-1-N4

Description: The ESP32-S2-MINI-1-N4 is a compact and efficient Wi-Fi microcontroller module ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-SOLO-2U-N16 / The ESP32-S2-SOLO-2U-N16 is a compact and high-capacity <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and embedded applications requiring extended flash storage and flexible RF performance. It is powered by a <strong>single-core Xtensa LX7 processor</strong> running up to 240 MHz, delivering reliable performance for control and data processing tasks. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, enabling stable and efficient wireless connectivity across a wide range of applications. <br><br>The ESP32-S2-SOLO-2U-N16 integrates <strong>16MB SPI flash memory</strong>, providing significantly increased storage capacity for firmware, OTA updates, data logging, and complex embedded applications. <br><br>This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement compared to PCB antenna versions. <br><br>The module includes a rich set of peripherals such as <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, USB OTG, and GPIO</strong>, enabling seamless integration with sensors, displays, and external components in embedded designs. <br><br>Operating within a supply voltage range of approximately <strong>3.0V to 3.6V</strong>, the device is optimized for low-power operation, making it suitable for battery-powered and energy-efficient systems. <br><br>Packaged in a compact <strong>SMD module with external antenna interface</strong>, the ESP32-S2-SOLO-2U-N16 is ideal for high-density PCB layouts and applications requiring enhanced wireless range and reliability. <br><br>The <strong>ESP32-S2-SOLO-2U-N16</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, data loggers, USB-enabled products, industrial automation, and embedded control systems</strong>, where extended memory capacity and reliable Wi-Fi connectivity are essential.
ESP32-S2-SOLO-2U-N16

Description: The ESP32-S2-SOLO-2U-N16 is a compact and high-capacity Wi-Fi microcontroller modu ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-SOLO-2U-N4R2 / The ESP32-S2-SOLO-2U-N4R2 is a compact and high-performance <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and embedded applications requiring enhanced memory and flexible RF design. It is powered by a <strong>single-core Xtensa LX7 processor</strong> operating up to 240 MHz, delivering reliable performance for control and data processing tasks. <br><br>The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, ensuring stable wireless communication across a wide range of applications. <br><br>It integrates <strong>4MB SPI flash and 2MB PSRAM</strong>, providing extended memory capacity for buffering, data logging, and more complex embedded applications. <br><br>This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, allowing improved signal strength, optimized RF performance, and flexible antenna placement compared to PCB antenna versions. <br><br>The ESP32-S2-SOLO-2U-N4R2 offers a wide range of interfaces including <strong>SPI, I2C, UART, I2S, PWM, ADC, and USB OTG</strong>, enabling seamless integration with sensors, displays, and external peripherals. <br><br>Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered and energy-efficient systems. <br><br>Packaged in a compact <strong>SMD module with external antenna connector</strong>, the ESP32-S2-SOLO-2U-N4R2 is ideal for high-density PCB layouts and applications requiring extended wireless range and reliable connectivity. <br><br>The <strong>ESP32-S2-SOLO-2U-N4R2</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, USB-enabled products, industrial automation, and embedded control systems</strong>, where compact size, extended memory, and robust Wi-Fi performance are essential.
ESP32-S2-SOLO-2U-N4R2

Description: The ESP32-S2-SOLO-2U-N4R2 is a compact and high-performance Wi-Fi microcontroller ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-SOLO-2U-N4 / The ESP32-S2-SOLO-2U-N4 is a compact and efficient <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for low-power IoT and embedded applications requiring flexible antenna configuration. It is powered by a <strong>single-core Xtensa LX7 processor</strong> running up to 240 MHz, providing reliable performance for control and communication tasks. <br><br> The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong> with data rates up to approximately <strong>150 Mbps</strong>, ensuring stable wireless connectivity for a wide range of connected devices. <br><br> This variant features a <strong>U.FL (IPEX) connector for external antenna</strong>, enabling improved signal strength, optimized RF performance, and flexible antenna placement compared to PCB antenna versions. <br><br> The ESP32-S2-SOLO-2U-N4 integrates <strong>4MB SPI flash memory</strong>, eliminating the need for external storage components and simplifying hardware design. <br><br> It offers a wide range of interfaces including <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, USB OTG, and GPIO</strong>, allowing seamless integration with sensors, displays, and external peripherals. <br><br> Operating within a voltage range of approximately <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for battery-powered systems. <br><br> Packaged in a compact <strong>SMD module form factor with external antenna connector</strong>, the ESP32-S2-SOLO-2U-N4 is ideal for high-density PCB layouts and applications requiring enhanced wireless range and reliability. <br><br> The <strong>ESP32-S2-SOLO-2U-N4</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, USB-enabled devices, industrial automation, and embedded control systems</strong>, where compact size, flexible RF design, and reliable Wi-Fi connectivity are essential.
ESP32-S2-SOLO-2U-N4

Description: The ESP32-S2-SOLO-2U-N4 is a compact and efficient Wi-Fi microcontroller module ...
Package: T&R | MOQ: 650 | MPQ: 650

ESP32-S2-SOLO-2-N16 / The ESP32-S2-SOLO-2-N16 is a compact and high-capacity <strong>Wi-Fi microcontroller module</strong> developed by <strong>Espressif Systems</strong>, designed for advanced IoT and embedded applications requiring increased flash storage. It is powered by a <strong>single-core Xtensa LX7 processor</strong> running up to 240 MHz, delivering reliable performance for control and data processing tasks. <br><br> The module supports <strong>2.4 GHz Wi-Fi (802.11 b/g/n)</strong>, enabling stable wireless communication with data rates up to approximately <strong>150 Mbps</strong>, making it suitable for a wide range of connected devices. <br><br> A key feature of this variant is its <strong>16MB integrated SPI flash memory</strong>, providing significantly expanded storage capacity for firmware, data logging, and complex applications compared to lower-memory versions. <br><br> The ESP32-S2-SOLO-2-N16 includes a rich set of peripherals such as <strong>SPI, I2C, UART, I2S, PWM, ADC, DAC, USB OTG, camera interface, and GPIO</strong>, allowing flexible integration with sensors, displays, and external components. <br><br> It features an integrated <strong>PCB antenna</strong>, providing a compact and cost-effective RF solution without requiring an external antenna. <br><br> Operating within a supply voltage range of <strong>3.0V to 3.6V</strong>, the module is optimized for low-power operation, making it suitable for energy-efficient and battery-powered systems. <br><br> Packaged in a compact <strong>SMD module form factor</strong>, the ESP32-S2-SOLO-2-N16 is ideal for high-density PCB layouts and rapid product development. <br><br> The <strong>ESP32-S2-SOLO-2-N16</strong> is widely used in applications such as <strong>IoT devices, smart home systems, wireless sensors, data loggers, USB-enabled products, industrial automation, and consumer electronics</strong>, where extended memory capacity and reliable Wi-Fi connectivity are essential.
ESP32-S2-SOLO-2-N16

Description: The ESP32-S2-SOLO-2-N16 is a compact and high-capacity Wi-Fi microcontroller modul ...
Package: T&R | MOQ: 650 | MPQ: 650













info@signalhk.com

+852 2417 2366

Room 1304, 13/F, Allways Centre, 468 Jaffe Road, Causeway Bay, Hong Kong.


SIGNAL-HK WIKI BLOG

Copyright © 2008-2024 Signal HK Limited. All Rights Reserved.Designated trademarks and brands are the property of their respective owners.
Use of this Website constitutes acceptance of Signal HK Limited Terms of Use and Privacy Policy

Cookie Policy | MSN EQV Parts |